P
Printablesthall72
Lego Compatible (61190e.dat) Minifig Helmet Floodlight for SW Clone Trooper Helmet
This model is compatible with the lego system.
- Downloads
- 345
- Likes
- 43
- Rating
- 0
Search results: flood
Counting matching models…
P
Printablessnoty
Milwaukee M12 Rover Flood Light Cover
This is a protective cover for the Milwaukee 2367-20 M12 ROVER Service and Repair Flood Light with USB Charging.
- Downloads
- 243
- Likes
- 33
- Rating
- 5
P
Printablesmurxmax
A320 Flood Light Panel F/O 111VU
This is my model of the Airbus A320 Flood Light Panel for my future homecockpit! VISIT MY COLLECTION “A320 COCKPIT” FOR ALL CURRENTLY AVAILABLE MODELS! The goal is to make an accurate replica, so if you have any specific data on the real…
- Downloads
- 182
- Likes
- 10
- Rating
- 0
P
PrintablesLeafy
RockShox Motion Control Floodgate Shim
Allows you to adjust the floodgate opening amount on motion control forks with non-adjustable floodgates. Print instructions PLA works fine. This prints as a single layer so just scale it in Z to adjust the amount of shimming you add,…
- Downloads
- 172
- Likes
- 5
- Rating
- 0
P
PrintablesPlanetAlexanderProjects
Halo 3 Flood Carrier Form Statue
Create your own flood carrier display with this 3D file pack! With this pack, you can 3D print a high detail flood carrier form figurine from Halo 3, with a High Charity inspired display base. Great for tabletop games or just to have as a…
- Downloads
- 165
- Likes
- 15
- Rating
- 5
P
PrintablesPeter Farell
Hapi - Egyptian God of The Flooding Nile
Hapi, God of the Nile Flood Who Was Hapi? Hapi was one of the most important and beloved gods in ancient Egypt. He was the divine personification of the annual Nile flood , known as the inundation . It's a common misunderstanding that…
- Downloads
- 162
- Likes
- 42
- Rating
- 0
P
PrintablesSimon_i3
1:200 Flood Light for Model Airports
1:200 Flood Light for Model Airports
- Downloads
- 149
- Likes
- 14
- Rating
- 0
P
Printablesjmynheir
4in Round Electrical Box 9, 15, 22.5, 30, 45 & 90 Degree Adapter Plate for Floodlight Cameras (rotatable)
9, 15, 22.5, 30, 45 & 90 degree angle adapter able to mount to 4" Circular electrical work boxes for cameras, floodlights, etc. There is a flange part, and an adapter part. Category: Household
- Downloads
- 149
- Likes
- 22
- Rating
- 0
P
Printablestcp_j
Flood&Drain hydroponic adapter
This 3D model is designed as an adapter specifically for flood and drain hydroponic systems, optimized for use with stackable containers. If you are located in Europe, it is ideal for utilizing standard euro crates as both your reservoir…
- Downloads
- 127
- Likes
- 33
- Rating
- 5
P
PrintablesNick
In-Line Flood System / Multi Connectors
This is designed to fit a .5" ID hose, it can be scaled to fit larger sizes if needed. This system has multiple uses. If you have a hose that has been cut or hose that has no fitting on the ends and you want to connect multiple lines use…
- Downloads
- 120
- Likes
- 18
- Rating
- 5
P
PrintablesAlexF
Nozzle floodlight for SOVOL SV06
After the Princore fan mod the view of the Nozzle was free, you could still see nothing, I felt I at least as too dark. The light of the WebCam and the lighting of the pressure chamber did not get there, so something had to happen... 1. I…
- Downloads
- 103
- Likes
- 43
- Rating
- 5
P
PrintablesMakersHelpCare
Football Stadium Floodlight Desktop Lamp
Saturday night football feeling at your desk! If you are from Germany and a little bit into football, you might notice the reference to the famous stadium lights from Werder Bremen. Even if you don't, you might have stumbled over…
- Downloads
- 92
- Likes
- 22
- Rating
- 0
P
PrintablesStarfleet42
Ubiquiti Protect Floodlight 30 Degree Adapter
This adapter is designed to allow the Ubiquiti Protect floodlight to be mounted to a soffit instead of a wall. This allows you to aim the floodlight, rather than only perpendicular to the wall. The mount that comes in the box is 30…
- Downloads
- 90
- Likes
- 12
- Rating
- 0
P
PrintablesLuke Hoersten
Eve Outdoor Cam Secure Floodlight Electrical Box Adaptor
The Eve Outdoor Cam Secure Floodlight does not fit a standard 4 in. round electrical box common in North America. This is an adaptor plate. Print in PETG to be waterproof and UV outdoor safe. Designed to fit #6-32 nuts and machine screws…
- Downloads
- 71
- Likes
- 9
- Rating
- 0
P
PrintablesPlanetAlexanderProjects
Halo 3 Flood Infection Form Figure
Create your own swarm of flood forms with this 3D file pack! With this pack, you can 3D print high detail flood infection forms from Halo 3. Included is the flood form split into different sections for easier printing, and an in-tact,…
- Downloads
- 68
- Likes
- 14
- Rating
- 5
P
PrintablesFlyingT
Blink Floodlight Pipe Mount
Modeled a matching baseplate and added a remixed pipe clamp from Excel102 . Please do not try to screw directly into the plastic, the Blink Floodlight is rather heavy and might fall down. Use M3x5x4 Heatinserts and M3 screws like you see…
- Downloads
- 63
- Likes
- 5
- Rating
- 0
P
Printablesbostwickenator
Makita LXT compatible portable floodlight
A Makita LXT powered floodlight using a lamp from Nilight https://www.nilight.com/collections/led-light-bar/products/nilight-4-inch-18w-1260lm-spot-led-light-bar-4-pcs?variant=26244044553 Holes are sized for ~M5 nuts and machine screws or…
- Downloads
- 62
- Likes
- 25
- Rating
- 4
P
PrintablesTitoVerano
DR!FT Sturmkind Flutlicht, Floodlight
Hallo Zusammen, hier ein Flutlicht für meine Rennbarrieren. Als Leuchtmittel dienen 5mm LEDs. Viel Spaß damit. Hier der Link zu meinen Rennbarrieren: https://www.thingiverse.com/thing:4137985 Hello together, here is a floodlight for my…
- Downloads
- 62
- Likes
- 14
- Rating
- 0
P
PrintablesMr. MegaTronic
the FlashFlood
My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J\_TeOsF4M\_F5pPPJQ As someone who has fallen down their basement stairs more than once, I can appreciate a small but ever-so-critical bit of illumination at night. I don't…
- Downloads
- 61
- Likes
- 17
- Rating
- 0
P
PrintablesJW693D
Diffuser for 8x8cm floodlight (Parkside 20v)
Diffuser that snugly fit over a 8x8 LED floodlight making the light much more evenly distributed. No glue required. The walls are 1.2mm, the flat surface is 0.48mm thick, enough for 2 layers of 0.24mm The inside dimension is a square with…
- Downloads
- 60
- Likes
- 15
- Rating
- 5
P
PrintablesZach Smith
Blink Floodlight 45 Degree Wall Mount
A quick remix I made of FlyingT's Blink Floodlight Pipe Mount, but will use to mount the light on a 45 degree angle to the wall. This is only my second ever model, made it using TinkerCAD. It's far from perfect but I think should be…
- Downloads
- 59
- Likes
- 3
- Rating
- 0
P
PrintablesEric Colby
Ubiquiti Unifi G6 Instant Camera Rain Shield Enclosure for Floodlight Cam
Created this remix of linked OP to provide more cover and suit my needs to make a G6 Floodlight Cam since Unifi doesn’t. I made several variations of the OP’s design, the first (which I used and does work perfectly) is a 4 mm longer…
- Downloads
- 58
- Likes
- 9
- Rating
- 0
P
PrintablesMichel Theriault
DMC2 CNC Flood Nozzle Mount
The way the flood nozzle is mounted is too flexible, it is hard to adjust the nozzle with one hand and have it stay where you put it. This is a solid mount. Update : I added two more versions, a medium and long. They move the nozzle up…
- Downloads
- 58
- Likes
- 5
- Rating
- 0
P
PrintablesFlyboyEUC
ATV Flood Light Adaptor for Veteran Sherman
I made this adaptor to be able to mount my night ride light to my Sherman. You'll need two 6x60mm bolts with nuts and washers. I recommend printing this in TPU so it can squeeze the light to keep it from falling down. I also used the…
- Downloads
- 56
- Likes
- 8
- Rating
- 0
P
PrintablesSchlachtkreuzer
Bird protector for eufy Security Floodlight Camera E340 (2023) (work in progress)
Warning: still in development This is a simple protection against birds. The plate goes on the top of the camera and is mounted with a screw that is included in the scope of delivery. My plan is to make the top so unattractive that the…
- Downloads
- 54
- Likes
- 7
- Rating
- 0
P
Printablessoundbylaura
Reolink Duo Floodlight Junction Box Adapter
You should probably just buy a security camera that fits with a round junction box. But if you didn't and you want to attach the REOLINK Duo Floodlight Cam to an existing junction box, you can use this adapter to attach it. You'll need…
- Downloads
- 54
- Likes
- 3
- Rating
- 0
P
PrintablesVopac
Milwaukee M12 PAL Flood Light Cover v2
Updated version, it now has two small bumps in the that prevents the lid from sliding off inadvertently. Also removed some plastic on the side for a sleeker look. Printed in AddNorth X-PLA Power tool Red, 0.2 layers and 2 wall loops, no…
- Downloads
- 47
- Likes
- 11
- Rating
- 5
P
PrintablesSanzhar Axani
Triple Flooding Planter
Well… I visited the supermarket for mineral water and impulsively bought three Sansevierias on the big sales after Women's Day. After the purchase I watched some video reviews on how to look after this plant species, so I designed this…
- Downloads
- 47
- Likes
- 5
- Rating
- 0
P
PrintablesTadTadd
Ubiquiti Smart Floodlight Backplate for Siding
The Ubiquiti Smart Floodlight comes with two backplates, one that holds the light parallel to the wall and the other that tips the light down at an angle. It is the latter angled bracket that is most useful (in my opinion) since you can…
- Downloads
- 46
- Likes
- 15
- Rating
- 0
P
PrintablesGrant Dunoon
Shelly Flood Holder
Ideal for when you need to raise the Shelly flood sensor off the floor, perfect for damp environments.
- Downloads
- 45
- Likes
- 2
- Rating
- 0
P
PrintablesRene Berthold
Floodlight for RC Models
As I needed an additional headlight for a tractor, I sat down to design one. The headlight can be used universally, a hole with a diameter of 2mm is required for mounting. Furthermore, 2x M2x6 screws are needed to attach the housing to…
- Downloads
- 44
- Likes
- 12
- Rating
- 0
P
PrintablesIronicallyJesus
Tuffenough solar floodlight mounting bracket
Does not have the latch to lock it in place but the tolerance gives it a perfect fit. Printed in PETG, 0.28 layers, 0.4 nozzle. Printer must be tuned well for best results. https://www.amazon.com/dp/B09F3DJNGF
- Downloads
- 41
- Likes
- 2
- Rating
- 0
P
PrintablesMikeG.
Adjustable DMC2 CNC Flood Nozzle Mount (Remix)
Variation on the excellent model by Michel. This is a remix of the “large” model with a slot to allow for better initial placement of the nozzle. I also thickened the walls as I was worried about the nozzle hitting the work and breaking…
- Downloads
- 41
- Likes
- 2
- Rating
- 0
P
Printablesdani0.exe
Weserstadion floodlight
Weserstadion floodlight for existing stadium model . It is designed to accommodate a WS2812b LED breakout board.
- Downloads
- 39
- Likes
- 4
- Rating
- 0
P
Printablesvmachinist
Parkside X20V TEAM LED Floodlight Adapter
Motivation & Design I had a couple of heavily-modified “100W” 12V LED floodlights bought some time ago from AliExpress. Upon arrival I've discovered that they are closer to 40W than 100W, which is probably a good thing since the LED chips…
- Downloads
- 38
- Likes
- 9
- Rating
- 0
P
PrintablesFinn
Wifi LED Flood Light (RGB)
You need 64 Pixel LED-Panel (about 2$): https://de.aliexpress.com/item/1005007273486672.html https://de.aliexpress.com/item/4001095066272.html (alternative) ESP8266 D1 Mini (about 1$): https://de.aliexpress.com/item/1005005658563136.html…
- Downloads
- 36
- Likes
- 24
- Rating
- 0
P
Printables3D_Goblin
Floodlight
Fun floodlight for a RC car of other fun project Model is printed with PLA Feet i made from TPU
- Downloads
- 34
- Likes
- 7
- Rating
- 0
P
PrintablesZombie Batman
EUC Flood Lights
These are extremely bright lights mounted to the sides on an EUC in front of the power pads. They are tilted down to avoid blinding others. These were modeled so that the power button is facing up on both sides. Attach the print to the…
- Downloads
- 33
- Likes
- 8
- Rating
- 0
P
PrintablesPaytnAve
Blink Floodlight Pipe Mount - Zip tie attachment
Printed in PETG, 0.2mm layer height and 15% infill. No support required.
- Downloads
- 33
- Likes
- 3
- Rating
- 0
P
PrintablesEugeneGTI
Ebb and Flood / Flow pump adapter
Simple ebb and flow adapter for Ikea Trofast storage box. Inspired by Chillichump's implementation of Ebb and Flood/Flow system. Optimized for easy printing. With this design you can attach the lid right to the bottom of container. A few…
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
Printablesgaryfain
Slip-on Suction Bell for Pipe End (Scalable) for Water Pond or Flood Clean-up
A standard 1” sch 40 PVC pipe will fit snug in the top-end recess-fit. If the fit is exposed to air, you can also secure it to the pipe either permanently with PVC solvent, or temporarily with duct tape to prevent air leaks. The (12)…
- Downloads
- 32
- Likes
- 7
- Rating
- 0
P
PrintablesOmaha3DPrints
Quans UV LED Flood Light Resin Curing Box
I bought a Quans 20w UV Light (Note: affiliate link) after I had purchased a resin printer to cure the prints once they had completed. I wanted to have a box that was opaque to be able to cure them most effectively, so I designed this and…
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
PrintablesJohn
Water leakage- flooding sensor
This is a simple DIY leakage sensor. Printed in PETG . Hardware needed: 2x M3x10mm hex bolts & nuts 2x lugs Hot glue to secure the cover 2m Cable (I used alarm cable) Please like :)
- Downloads
- 28
- Likes
- 3
- Rating
- 0
P
PrintablesMAHWE
Reolink Duo Floodlight Rohrhalterung
Reolink Duo Floodlight Rohrhalterung für Rohre mit einem Durchmesser von 27mm . https://reolink.com/de/product/reolink-duo-floodlight-poe/ modifizierte Variante https://www.printables.com/model/1192027/edit
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
Printablesthreonin
Customizable anti-flood dripper holder for automatic watering system
For my many potted plants I am using an automated watering system from Gardena, this requires a dripper at the beginning of every water circuit to prevent the law of communicating vessels to empty the water tank. Before I was using water…
- Downloads
- 27
- Likes
- 9
- Rating
- 0
P
PrintablesRifraf
Outdoor Floodlight Stake
Simple ground stake to attach to outdoor floodlights. I printed in PLA with 50% infill and 6 walls, bottom and top layers. The previous (from the factory) stakes broke when a hammer was used to dislodge them from the ground. I can't speak…
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesSouzoumaker
Mini Floodlight
This is a miniature floodlight that I use primarily for photography. It's a relatively cheap and powerful light that I use to take all my photos on my project website. It feels like looking at the sun at full blast. Assembly guide:…
- Downloads
- 25
- Likes
- 0
- Rating
- 0
P
PrintablesJulianHG
Gas shroud - for flooding something with gas eg CO2 - has gasket slot
i use this to bathe my sand cores in CO2 so the harden. It has a slot for a rubber seal to fit. it works really well.
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesRCmodeleng
Floodlight with SMD 0805 1:14 scale
A small detailed floodlight based on an actual design at 1:14 scale fitted with an 0805 SMD. Other SMD's could be used. An original design on Fusion. The floodlight is contained in the mounting bracket with small friction hinge, however…
- Downloads
- 24
- Likes
- 7
- Rating
- 0
P
PrintablesBitSpirit
Flood Light Mount
The 3D model is a versatile floodlight holder designed for easy installation. It features multiple mounting points, allowing you to secure the floodlight in various locations. The holder is screw-mounted, ensuring a stable and reliable…
- Downloads
- 22
- Likes
- 7
- Rating
- 0
P
PrintablesMike81622
Floodlight bracket
Made these because all floodlights come with a flimsy metal bracket that creates way too much leverage for the small contact surface there is when mounted outside on your façade, on top of any thermal insulation. After a short period of…
- Downloads
- 22
- Likes
- 4
- Rating
- 0
P
PrintablesSean
Yolink Flood Sensor Holster and Lifter Remix
Yolink flood sensor lifter - adds 2mm to the bottom of the sensor to help avoid simple mopping mistakes. *WARNING* this lifts the sensor by 2mm - water will have to raise 2mm before your sensor trips.
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesCoactionTechno
Floodlight Wall Corner Bracket
Flood light Corner Bracket This bracket (requires two prints) allows you to mount a flood light or another light with a similar mount on the corner of a wall, allowing you to spread light on the corner of a building. Print with an outdoor…
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
PrintablesRCmodeleng
Flood light for 2835 SMD strip with side entry cable scale 1:14
A small detailed floodlight at 1:14 scale fitted with an 2835 SMD strip. Other SMD types strips could be used. An original design on Fusion. The floodlight is contained in the mounting bracket with a 2mm screw on one side, or fixed with…
- Downloads
- 19
- Likes
- 4
- Rating
- 0
P
PrintablesChristian
Ring Floodlight Cam Adapter Zoll - M12 MOD
Nach langem Probieren habe ich einen funktionierenden Adapter für die Ring Floodlight Cam drucken können. Anscheinend ist das Zollgewinde kein Standart und es wurde in keiner Tabelle gefunden. Mit dem Adapter können defekte LED Spots…
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesMostly Flawles
Fibaro Flood Sensor Wall Mount
Wall Mount for the Fibaro Flood Sensor, ugly but it works. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Infill: 5 Filament: 3Dprima PETG Category: Other
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesEthan Rainer
UV Flood Light to 5 Gallon Bucket adapter shim
A simple shim to adapt the flat yoke of a mini UV floodlamp to the curved side wall of a 5-gallon buck to make a cheap curing station. This bracket is for mini flood lamps like the kind that are found in UV light and solar turntable…
- Downloads
- 17
- Likes
- 9
- Rating
- 0
P
PrintablesLewgit
Halo flood tank form kenner figure
This is kinda a big print but it should be scaled to 3.75 figure also known as 1/18 scale. Print with supports. Pls like and post makes Good luck!!!
- Downloads
- 16
- Likes
- 4
- Rating
- 0
P
PrintablesAndrew Bower
NOVOSTELLA RGB Flood Light Glare Shield
Glare Shield for Novostella RGB Flood Lights.
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesThe Stock Pot
Battery Powered WLED Floodlight Mounts
These are the 3D printed components for my temporary tree floodlight setup from this video ✨ Features Temporarily mount your WS2811 floodlights to a tree of any size without damaging it. Use the waterproof battery box to install a…
- Downloads
- 15
- Likes
- 4
- Rating
- 0
P
Printablesscross01
Floodlight color filter
Simple attachment to add color light filters to the Wasserstein Floodlights I have for my WyzeCam v2 and WyzeCam v3 The filter disk can be printed in your choice of color to either soften the bright white of the floodlight with an warm…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesJackson Szeto
EUC Flood Light with zip tie option
Flood Lights for Electric Unicycles Fitting light: https://www.amazon.com/dp/B0B7454TGZ
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesTitus
LED Flood Light 50° with active cooling
I designed this flood light with 365 nm UV LEDs and a matching UV pass filter in mind but you could also not subject yourself to invisible eye damaging radiation and opt for any other LEDs in the visible spectrum of light. If you want to…
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesCaelestis Workshop
Prusa i3 MK3S Delta P-Duct Nozzle Floodlight
I needed more lights for my 3DO 4K Nozzle Camera so i made this.
- Downloads
- 15
- Likes
- 5
- Rating
- 0
P
PrintablesZac Cachia
floodlight clamp
print this and u can make a flood light with a small 24v bulb
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
Printablesmrslother
Unger Flood Lamp Bulb Changer Insert
My home has tall ceilings which means I have to use a pole to replace light bulbs. For years I have used the Unger Flood lightbulb Changer, which is essentially a pole with suction cups used to attack to a light bulb. When I accidently…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesRene Berthold
modified Seat MK3 for the floodlight
Angepasster Sitz damit der Scheinwerfer angebracht werden kann. Download für den Scheinwerfer: https://www.printables.com/de/model/954624-floodlight-for-rc-models
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesRene Berthold
modified Seat to attach the floodlight
Angepasster Sitz damit der Scheinwerfer angebracht werden kann. Download für den Scheinwerfer: https://www.printables.com/de/model/954624-floodlight-for-rc-models
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
Printableslkarlslund
Floodlights for Voron 0.2
Easy to print floodlights for your Voron 0.2 using cheap WS2812B addressable RGB strip. If you fit it at a 45 degree angle on the bed it is printable on the 120mm plate. It fits the strips that are 10mm wide, and with 60 LEDs/m you get 8…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
PrintablesMAHWE
Reolink Duo Floodlight Rohrhalterung V2
Reolink Duo Floodlight Rohrhalterung für Rohre mit einem Durchmesser von 27mm . https://reolink.com/de/product/reolink-duo-floodlight-poe/ modifizierte Variante…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesDhubado
EUFY E360 Flood Light Cam Mount Extension
The main body of the camera was wedged against the trim around my garage door. This little plate extension, and a 1/16 thick rubber gasket, extended the camera enough to mount it as expected. It is not a perfect outer profile. I took my…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
Printableschmeee
Reolink Elite Floodlight WiFi mount
Reolink Elite Floodlight WiFi mount fot thermal insulation composite walls. Adds an additional mounting point on top to better distribute and encrease holding force. Use 3x insulation anchors (e.g. Fischer FID II Plus) to mount at slotted…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesHendl
Drain Support for Balcony to avoid flooding
With climate changes the rain is pooring down more heavily every year. If you have just a hole in your balcony like we have, you may know the problem, that your balcony can get flooded, when the hole is clogged due to leaves, particles…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesDewey
Home Depot Jumbo C9 Govee Flood Light Adapter
C9 Bulb Modification Guide (Govee Spotlight Conversion) Important: This modification permanently alters the Home Depot C9 yard decoration and makes the original design unusable. Proceed at your own risk. I wanted to convert the…
- Downloads
- 12
- Likes
- 3
- Rating
- 0
P
PrintablesKdeboth
Flood Tracker Clip for Forbidden Island
A simple replacement clip for the Forbidden Island flood tracker. For use in Forbidden Desert, you will need to resize slightly as the Flood Tracker is a hair thicker than the Storm Tracker. I printed with normal supports in between the…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesEric Mann
Unifi Floodlight Pole Angled Mount
I needed a clean way to mount the Ubiquiti Floodlight (UP-Floodlight) to a pole using the angled included base, but couldn’t find anything that matched the look of the original hardware — so I designed one. It bolts directly to the…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesRCmodeleng
Flood light for 2835 SMD strip with rear entry cable scale 1:14
A small detailed floodlight at 1:14 scale fitted with an 2835 SMD strip. Other SMD types strips could be used. An original design on Fusion. The floodlight is contained in the mounting bracket with a 2mm screw on one side, or fixed with…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesWillie Designs
Exterior Floodlight Cover Adapter for Gel Filters
Our flood lights are relatively new so I didn't want to replace them with RGB lights. This light cover allows you to place and secure gel light filter sheets to color the light for nice ambient lighting for holiday's or any occasion that…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
Printablesttt126
Art déco ceiling floodlights
A lamp project based on the art deco period. Lampshade printed in PETG, lense in clear PETG all other parts in PLA. Covered with gold and aluminum metal. Foot filled with screed concrete, approx. 5kg. Height of the lamp approx. 175cm…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
Printablesantlers
On-Camera Floodlight... Cold shoe... Wedge Thing
This is a little wedge-shaped cold-shoe mount adapter intended for attaching pocket floodlights to compact cameras. By being wedge-shaped, it gives you the option to point the light slightly up or slightly down, which I find more useful…
- Downloads
- 11
- Likes
- 5
- Rating
- 0
P
Printablesmattie
100w Floodlight Flashlight
High difficulty Gonna need good electronics knowledge as no instructions. Need an assortment of m3 bolts and nuts The chinese 100w led is pretty inefficient, produces a lot of heat, even so i think the fan and heatsink i chose were…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesHuskerTheCat
Protector for GoBILDA Floodgate switch
The model is created by FTC team 26706 Thunder Lab. If you choose to use this model, please keep our logo on it.
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
PrintablesNoooUGH
Flood Light Barn Door Shutters
This is barn doors (shutters) for Sylvania PAR38 90W flood light bulbs . Inspired by the barn doors you see in studio lighting, these mount directly onto the bulb to allow you to precisely control the light with sharp cut-off lines. It'd…
- Downloads
- 10
- Likes
- 5
- Rating
- 0
P
PrintablesLewgit
Flood carrier action figure
Print with supports. Pls like and post makes. Good luck!!! Added a hollow version so you can put infections forms in it like the mega construx version.
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesZura
Halo Floodlight Photo Eye Cover
Rather than let a light sensor deciding when my flood light should be on or off, I wired the floodlight into a switch and used this to cover the sensor. You may need to print it at 98 or 99% based on the material to get a nice press fit.…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintableszUltra
Floodlight mount for Parkside pegboard
For mounting you're going to need 3 self tapping screws, after which you can slide it down onto the pegboard. Vertical mounting is also possible. Tolerances for these panels differ from batch to batch, some panels are thicker, some are…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
Printablesphillycheeseman
Flood Dog Project Case
Flood Dog Co. is a not for profit organization dedicated to designing, building, deploying, and monitoring smart devices to collect ground, surface and lake water levels along the Great Lakes. Flood Dog is working to enable a pilot…
- Downloads
- 9
- Likes
- 2
- Rating
- 0
P
PrintablesHauntingParadox
Ebb and Flood Box for 29 Gallon Aquarium
This box goes on top of your 29 gallon aquarium, and connects with a 10mm hose with a timed pump to create an ebb and flood system for growing plants with your fish! Do note, this is a very big print and will likely need a big printer!
- Downloads
- 9
- Likes
- 2
- Rating
- 0
P
Printablesiplop
Floodcut Insulation Install Tool
Purpose of this device: To install insulation in walls that have been flood cut 2ft or 4ft high. Maybe there never was insulation in your walls or maybe there was cellulose insulation that fell out or got wet. There are few options when…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesMurray
holder LED FLOODLIGHT with motion Sensor
to mount on wall and keep ability to adjust
- Downloads
- 8
- Likes
- 3
- Rating
- 0
P
Printablesinternett
Floodlights Top Riser for Bambu X1C Printer and similar
Please remember the benchy on the pics is PLA matt black (Bambu filament No. 11101). Printed with PETG 40% infill and smooth PEI plate: 8 parts and 4 x connectors Normally I'm not fan of screwing self printed parts, but in this case it…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesMarkoderxvi
Eufy E30 Floodlight Halterung für Montage an Hausecken
Ich habe dieses Modell erstellt um meine Sicherheitskamera Eufy E30 Floodlight an eine Hausecke zu montieren. Ich habe alle Löcher, die ich nicht gebraucht habe, von innen mit Wetterfestem Silikon abgedichtet. Ich habe das Modell in…
- Downloads
- 8
- Likes
- 3
- Rating
- 5
P
PrintablesSauron
Shelly Flood gen 4 wire holder plate
Two kind of Shelly flood wire holders. One with place for double sided tape - like 3m or other foam, strong tape. Second for led plate to be put inside, with pause during printing - to just hold by weight the cable.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesNeal Connor
Flood Light Switchplate Icon
A switchplate icon for exterior flood lights Category: Household
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablesphillycheeseman
Flood Dog Capacitance Sensor Version 1
Flood Dog Co. is a not for profit organization dedicated to designing, building, deploying, and monitoring smart devices to collect ground, surface and lake water levels along the Great Lakes. Flood Dog is working to enable a pilot…
- Downloads
- 8
- Likes
- 2
- Rating
- 5
P
PrintablesHauntingParadox
Ebb and Flood box for 10 Gallon Aquarium
This is a model I made to fit on a 10 gallon aquarium and work with a cheap pump I found on aliexpress to create an ebb and flow box to grow vegetables/herbs etc. with my aquarium!
- Downloads
- 7
- Likes
- 2
- Rating
- 0
P
PrintablesDamienPrint
Car Magnetic Floodlight Bracket
bracket to support up to 2 LED floodlights and 1 small amber strobe light (70mm dia). 3 x 20mm magnets required. does not require support to print if printed standing on the front face with the back “middle” magnet hole at the top.
- Downloads
- 6
- Likes
- 3
- Rating
- 0
P
PrintablesEric Mann
Unifi Floodlight Pole Flat Mount
I needed a clean way to mount the Ubiquiti Floodlight (UP-Floodlight) to a pole using the standard base, but couldn’t find anything that matched the look of the original hardware — so I designed one. It bolts directly to the factory…
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesDaniel
WLAN/WLED Smart 2D Effect Multicolor Outdoor Floodlight
Hello! I wanted an outdoor-capable smart LED floodlight that can be controlled via WLAN, with smart home integration and preferably app control. I also wanted a 2D color effect, meaning the LEDs are individually addressable, allowing for…
- Downloads
- 6
- Likes
- 3
- Rating
- 0