Wifi LED Flood Light (RGB)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cheap and easy to build WiFi LED flood light based on an ESP8266/ESP32 and WLED. Everything for around 3$!
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 36
- Makes
- 0
- Views
- 604
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
You need
64 Pixel LED-Panel (about 2$):
https://de.aliexpress.com/item/1005007273486672.html
https://de.aliexpress.com/item/4001095066272.html (alternative)
ESP8266 D1 Mini (about 1$):
https://de.aliexpress.com/item/1005005658563136.html
https://de.aliexpress.com/item/1005006235653025.html (alterative)
Building
You can glue the panel in place and then add athe ESP32/ESP8266 board to power the panel using WLED.
Solder 5V from the ESP to V+, GND to V- and an D4 to DIN.
To use the panel you have to flash the ESP with the WLED-Firmware. You can use the online-flash-tool: https://install.wled.me/
Once powered on, the ESP will host an access-point. In the interface you can now set up the LEDs by heading to Config→LED Preferences and then configuring the Panel like this:
