Counting matching models…
I made this for WLED and a ESP32 on a breakout board. Not made for a project box. Has a snap tight lid and holes for the lead wires for the LED's and one for the power/data. I printed in PETG with no supports. Install WLED Welcome to WLED…
Description Simple design of enclosure for WLED ESP32 Enclosure with microphone Used components: ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi https://amzn.eu/d/9D1nSNl SP32 Breakout Board GPIO 1 into 2 Compatible with 30 Pins…
Super easy to set up everything is pressure fit Required Materials 1x MagWled Controller https://magwled.com/?srsltid=AfmBOoqkkn42OHM3vVQy_1Wa_CK77OUqh4FkzuS7uOSNptdE9KkXKZdd 1x WS2812B light strip…
Light base that holds a neopixel ring and ESP8266 running WLED. The tree is not included, this is just the base designed to hold a WS2812b light ring, an ESP8266, and a buck converter to adapt the incoming 5V to the appropriate voltages.…
This was designed for a cubby which is 20" wide and 15" deep. The LED's stick to the “channels” (pointing down at a 45 deg angle) and the channels stick to the intersection of the cubby walls and ceiling. The diffusers slide into the…
A simple click-lock case for an ESP32-S3 SuperMini. Nicely fitting, snug without being tight, with a small cable hole at the back for WLED or any other cables you want to run externally. The click-lock is tight and made to be that way for…
Snug snap-fit case for an ESP32-WROOM 38-Pin devkit USB-C. Hole at the back for a cable (can easily fit a 5mm wide 3-core or anything similar). This was designed for a specific ESP32 board I got from Ali and couldn't find a nice fitting…
I tried using the file on the MagWLED website for the power button model by ‘James’, but it had a lot of build errors when sliced. Unclear if the issue is the file or my download, but it doesn't seem to be published anywhere else to…
A modular smart lamp powered by an ESP32 running WLED , with addressable LEDs wrapped around a central core. The outer diffuser and decorative shell soften the light and give it a clean, modern look. The lamp is perfect as an ambient…
README Overview I wanted to improve the dim and unsatisfying light output of my IKEA VARMBLIXT lamp after seeing others undertake similar modifications. The total cost was around $40 (not including the power supply and the unused led…
found these led drivers that are an all in one for wled, small , made this deeper to allow for the controller to fit fit, had to drill hole to fit plug, might mod a hair deeper and make hole better for power plug. thanks to OP for making…
There are a lot of printable lamp projects that are based on the “ LED Lamp Kit MH001 ” from Bambu Lab. Basically the kit consists of a " puck " with a diameter of 70mm with a power chord that emits white light. This project is a…
NOT FINISHED JET This is my Project of making caters who you can eaysly mount in any kind of headphones. Current version uses a vape Battery with 360mah witch lasts ca 2-3h. I plan to build a v2 with a 500mah Battery and proper power…
Just a simple box housing esp-32 30 pin board and 3 way speaker terminal, with cut outs for any type usb, and to reach the GPIO pins, which are labled on top for easy reference. Add a layer change on the lid with lighter color on top for…
Wall Mount for Skateboards V2 is an updated version of the original Wall Mount for Skateboards with WLED Aluminum Profile (V1). This version adds support for two LED aluminum profiles , allowing more even and stronger illumination of the…
A compact ESP32 WLED enclosure that I made - Powered by USB-PD. Just stick this somewhere under your desk. Feel free to remix on TinkerCad . PARTS LIST ESP32 USB-PD Trigger WS2812B RM065 Pot 2 X Tactile Push Buttons 4 X M3*16 screws…
Body parts to add led strips to the Wltoys 144001 remote car. Controlled via Wled . Printing in TPU is highly recommended! Also needed: Esp32 or Esp8266 with Wled 5 V Led strip compatible with Wled Buck/step down converter to get the…
Features: Wife approval factor... many options I found didn't look good enough for the significant other to let it in the living room. This is more discrete. High voltage wiring is fully enclosed in separate section of the enclosure, thus…
just a clean lid as a remix
4x6cm protoboard M2.5 screws ESP32-WROOM-32 Type-C breakout board with pull down resistors for 5V SN74AHCT125N logic voltage converter buffer Wiring: https://kno.wled.ge/basics/getting-started/
Link to Video: Video will be uploaded in a week
Zur Ausleuchtung des Schreibtisch wird ein LED-Streifen WS2812b über Kopf an einem Regalboden montiert. Im Beispiel ist der Strip unter einem KALAX Regal montiert. Deckel wird nur gesteckt. 😄 Gefällt euch das Projekt? Dann lasst gerne ein…
A custom 3D-printable back housing for lithophane frames that neatly integrates all necessary electronics for a portable, wireless lighting experience. By using an ESP8266 running WLED, the lithophane can be fully customized with various…
Enhance your cyberware setup or workspace with this lightbox featuring the Kiroshi Opticals from Cyberpunk 2077. The internal geometry features a physical divider that separates the top section (KIROSHI + logo lines) from the bottom…
Printoptions: 0.15-0.2 layerheight 10% infill Parts: https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details https://www.amazon.de/dp/B0C5D6H38S?ref=ppx_yo2ov_dt_b_product_details&th=1
Das Weihnachtsbaum Fensterbild mit WLED Neopixel ist eine stimmungsvolle Dekorationsidee für die festliche Jahreszeit. Durch die Verwendung von Neopixel-LEDs, die von der WLED-Plattform gesteuert werden, entsteht eine beeindruckende…
i printed without supports! with 10% infill or more The Aluminium profile is E45 (bought it on eBay) with 18,5x18,5 mm (this square socket for the profile is 19x19mm in the files) I used an WLED controller with 40x55x20mm (the Box size is…
About: Inspired by this Hue Signe Clone . I designed the model from scratch. This design uses an internal power supply so that no bulky wall wart is needed. Instead, only a power cable is needed externally, adding to the sleek design.…
this is an optimized cover for ESP32 case for printing on multicolor printers (like Bambu Lab with AMS). I have optimized the WLED logo so that the logo does not sag during printing as it does on the original cover model. In addition, you…
You are doing me a big favor by clicking the Like button :-) Shopping list WS2812B PCB RGB Led (AliExpress) Wemos D1 Mini (AliExpress) Thin wire 30AWG (Ali Express) Black Filament - Prusament Galaxy black Warm white Filament – E-Sun…
You are doing me a big favor by clicking the Like button :-) Shopping list WS2812B PCB RGB Led (AliExpress) Wemos D1 Mini (AliExpress) Thin wire 30AWG (Ali Express) Black Filament - Prusament Galaxy black Warm white Filament – E-Sun…
WLED case made easily mountable, and removable. Also made the light hole on the cover plate 1 layer thick to help reduce light casting onto walls at a distance from the indicator light. Dovetail is the same size as original. Category: DIY
A dig uno box that has support for a barrel jack a mountable button and ethernet jack.
UPDATE 2025 New lampshade, HomePod style But it not easy to print, need use support with non-stickable material (PETG+PLA or special support) New top cup available! Smart RGB LED Lamp with ESP32 and WLED This customizable 3D-printed RGB…
Enclosure designed in FreeCAD for my 12channel PWM WLED PCB designed in KiCAD. You can find the FreeCAD files for the model here Printing prints well, even with 0.6mm nozzle size and 0.20mm layer height. No supports needed. Assembly Print…
Case enclosure for Srg74's WLED Wemos shield at Github This WLED controller is available assembled in tindie.com. EU users can buy it from MoonModules You will need 4x M2x12mm screws , socket head. Yes, I know, blame the board designer…
NOCH IN BEARBEITUNG Hi, anbei habe ich eine Smarte Lightbar mit WLED erstellt. Nach dem Vorbild von govee und den anderen Herstellern. Benötigt werden ein Wemos D1 Mini, Ledstreifen (WS2812b) die zwei Druckteile und ein 5V Netzteil.…
Simple case to hang on the back of my cabinet which has an esp32 running wled to control the cabinet light. No special print instructions.
Need a Halloween costume? Christmas Party? Show support of your favorite sports team? Add some flare to your Crocs with individually addressable LEDs and WLED . Perfect for the occasional occasions. Please ignore the bad print quality. I…
A custom box with a sliding lid to house a Node-MCU 30Pin ESP32 board as well as a Meanwell LRS-50watt-5amp. Have included the finished box as well as seperate bases for the individual components. The box should be adjustable via user…
I wanted some LED's outside wired with WLED controller so I needed a case. Had a OBO case laying around so decided to use that. This is for a 55x137x32mm power brick, it fits in a OBO T250 case and I use a NodeMCU Amica board with a…
Base para utilizar en la caja mario que se compra en Aliexpress y poder instalar un controlador Wemos y dos tiras de neopixel para poder controlar la luz por la noche.
Backlight housing with molex power connector and WEMOS D1 mini on WLED. I used it for the backlight in the computer. I used the yellow wire because I had a bad wifi connection. screw hole for 3 mm screws. Molex connector from an old HDD.
This version features an ALL IN ONE PCB of the LED clock project by @imeszaros. The PCB was specifically designed to be under 100mm so it will cost less to produce it. I would suggest to ORDER A STENCIL as well, at least for the FRONT of…
The matrix model prints best using organic supports. I have had good results printing the model in PETG with PLA supports on a Prusa XL. The LED matrix generates heat, model should be printed with heat resistant filament. Avoid using PLA…
Made a small Christmas Tree with a base for an ESP32S NodeMCU - that will run WLED. This connects to your WiFi and you can control the WS2812B LEDs that are connected to it. You will need to print 3 parts - I have attached the OpenSCAD…
LaskaKit ESPwled - ovládání 5, 12 a 24V adresovatelných LED pásků (WLED) 3D model vývojové desky ESPwled, která dokáže řídít nejrůznější adresovatelné LED pásky (girlanda etc). github: https://github.com/LaskaKit/ESPwled e-shop:…
Krabička pro LaskaKit ESPwled - ovládání 5, 12 a 24V adresovatelných LED pásků (WLED) Krabička pro vývojovou desku ESPwled, která dokáže ovládat nejrůznější adresovatelné pásky s napětím 5, 12 a 24V. WLED. github:…
👍 Do me a big favor and hit the Like button! ✨ 🛒 Shopping List WS2812B RGB LEDs (AliExpress) Wemos D1 Mini V3.0.0 (AliExpress) Thin wire 30AWG (AliExpress) Black filament – Sunlu Black Warm white filament – eSUN White‑B Solder tin Cable…
Diese Box in eine DMX Strecke zwischenstecken und die Lampen für einfache anwendungen per WLED steuern. Folgende Parts wurden verbaut: ESP32-S3 Mini / Zero SN75176 Neutrik XLR Einbau NC3FAAH NC3MAAH Die komponenten wurden mit dünnem…
YA case for a Wemos D1 Mini case. I designed it KISS without acces to the unnecessary USB connector. The addressable 300 RGWB LED strip SK6812 is connected to a 5V/10A power supply and supplies the D1 with power. The rail in the base is…
WLED Christmas Tree You will need: ESP8266-12F (D1 mini NodeMcu) 3 wires cut off led stripe with 20 LEDs WS2812B an soldering iron and solder and of course the three printed 3D models The assembly is described in the pictures. You maybe…
Printed with Prusament PETG Jet Black 0.2mm supports are required for the bottom part. Uses a U type aluminium profile as found on Aliexpress: https://www.aliexpress.com/item/32879628265.html?spm=a2g0o.9042311.0.0.27424c4dWDKslJ
I created this housing for my WLED project, but it could also be used for other applications. Printing Prints with no supports on standard settings. I used PLA. In the file section, there is a file with the correct orientation for each…
*** You are doing me a big favor by clicking the Like button :-) *** This heart can be combined with the letters from my other project. https://www.prusaprinters.org/prints/109865-glowing-wled-or-led-all-alphabet-letters-and-all-n…
I wanted to mount LED lighting under my desk using Hands On Katie's excellent Underware system. I used a Vroom32 ESP32 Dev board for a WLED controller, using the excellent case created by Predy, but it needed some tweaks to make it…
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required. Like the ones on Aliexpress:…
Halter für ein Meanwell RS-50-5 Netzteil mit Platz für einen ESP ideal für WLED Holder for a Meanwell RS-50-5 power supply with space for an ESP ideal for WLED
HOME SIGN with holes for led-strip u have to drill one hole for the usb cable glue the body
A Knowledge Hunter. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Use top from https://www.printables.com/model/986752-magwled-1-enclosure-official Use M4 screws/bolts, preferable button head, to mount it.
wireing is simple you can use buzzer you can find the download for the spetial version of wled here https://imeszaros.github.io/ledclock/
TBD; 24.12.2024 The F3D file is kinda dirty. Will probably be cleaned up next year (2025).
I made this for WLED and a ESP32 on a breakout board. Not made for a project box. Has a snap tight lid and holes for the lead wires for the LED's and one for the power/data. I printed in PETG with no supports. Install WLED Welcome to WLED…
Description Simple design of enclosure for WLED ESP32 Enclosure with microphone Used components: ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi https://amzn.eu/d/9D1nSNl SP32 Breakout Board GPIO 1 into 2 Compatible with 30 Pins…
A sound reactive wled enclosure using an esp32 d1 mini. Note that an esp32 is needed for wled sound reactive. parts required: printed top and bottom of the enclosure. print at 80% infill for strength. INMP 441 mems microphone like…
I like the floor "mood led’s" but not the price! I've made quite a lot of ESP32/WLED based lights, so thought I would try to make these floor lamps. Could'nt get the top I wanted to print properly, so had to compromise and use a different…
This is the case and mount for the WLED open source project. Mount currently designed for RatRig vCore4 backpack. I only designed the case and mount ALL other credit goes to the original designers and developers of WLED. Parts List One…
I love the Ring Light designed by Sevro, and I also love addressable LEDS and using the very simple and popular WLED platform. WLED is easily installed on a ESP8266 or ESP32 microcontroller. This base is designed to hold the the ESP8266…
This Project assumes that you already have a HomeAssistant server running! Hardware: Neopixel strip (WS2812B; 60 LED/m; 5V ) small wires Wemos D1 mini board (or any other small board that can run WLED) Power supply 2 x M3x5 screw…
The Spiral Lamp: The spiral lamp is a cost-effective, easy-to-build, fully addressable LED lamp and can be easily controlled and programmed via an app or browser. Required Parts: Name AliExpress ESP32 SuperMini 2,89€ [ Link ] (ESP32 C3…
A simple box to hold a WLED controller on the top of a magnetic board. Used in my video: https://youtu.be/N6fjebJWuyU
Print and assemble… Print in PETG if you want the “tabs” to not break as easily… :) I did som smaller PCB-Mods on my variant, but the box should fit still for this controller: https://github.com/Hasenpups/WLED_ESP32_Controller
This is a case for the D1-mini based board from Hasenpups, that is designed to connect addressable LEDs/Neopixel strips and handle them with the WLED firmware. You can find the PCB-design on Github here:…
I use this box for my WLED Controller outside on my terrasse. Due to the Magnets I glued under it hasn't been holding vor very long, so I remixed the Design of Bencham95 and imprint the Magnets in the bottom side. Add a Pause on Layer 14…
It has a neat handle, intended to be used with a (18650) Battery, WLED + Battery Usermod and rough dimensions of a 1.5L bottle. so its portable. TBD; 12.01.2025 A more detailed description will probably be added this year (2025). PaCaLa =…
Components used Adafruit QT Py ESP32 Pico Adafruit MiniBoost 5V @ 1A - TPS61023 1 metre of WS2812B tape (10mm wide, 60 LEDs/m) I added a 7x7x6mm heatsink to the ESP32 Pico IC (using thermal glue) as it was running rather warm & I was…
Warning: You won't be able to access the Micro USB port with this enclosure! I modified this housing to be quite a bit slimmer, but it still has enough space for a level shifter and a 24V to 5V step down module. That's why the opening for…
An ESP32 enclosure for WLED setups with an optional housing for INMP441 I2S digital microphone for soundreactive-awesomeness. The ESP32 boards that I use are from AZDelivery ( Amazon Link ) The enclosure has snap-on cover and two design…
You are doing me a big favor by clicking the Like button :-) There is enough space in the bottom for a Wemos d1 mini and the cabling. Shopping list 21 x WS2812B RGB Led (AliExpress) 1 x Wemos D1 Mini V3.0.0 (AliExpress) Wire thin 30AWG…
This is a lantern that uses a 16x16 LED matrix for light and to make patterns. The controller is an ESP32 D1 Mini with WLED controlling the matrix. Parts list: 5v 16x16 LED matrix 5v power supply ESP32 I've included Amazon links, but I'm…
WiFi Pixel Controller for WS2812 LED strips and fairy lights based on WLED firmware. Project description: https://www.maltepoeggel.de/?site=pixelcontroller Circuit board at Aisler: https://aisler.net/p/GZWNWPUL Circuit board at OSH Park:…
I have made this cat lightbox for the cat lovers out there. I have printed mine in PTEG but it should print fine in PLA. You must ensure your printer is dialed in or you may have a fitment issue with the top cover. Used an ESP32-c3 mini…
Double Helix LED lamp controlled by ESP32 and WLED Each Helix and the base has individual controlled WS2812B (144/m) led strips. I have included the upper base as step file so that it is possible to add mounting points for an ESP32. The…
This is an awesome system for WLED. This is the case for it. It is specifically modelled for: Controller AZDelivery NodeMCU ESP8266: amazon.de 2x USB-C Connector Female with screwholes: Aliexpress 4 Big Screws 4 small screws 24AWG Cables…
Project box to hide an Arduino Uno footprint device inside and use additional space for PWM and Buck Converter.
Case for MagWLED-1 LED board. The board can be purchased at Amazon: https://www.amazon.com/gp/product/B0CYKYDH64/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
You are doing me a big favor by clicking the Like button :-) Shopping list 18 x WS2812B RGB Led (AliExpress) 1 x Wemos D1 Mini V3.0.0 (AliExpress) Wire thin 30AWG (AliExpress) Black Filament - Sunlu Black Warm white Filament – ESun…
Red lamp for lighting up the basket and ground underneath an Innorel RT90C during astronomy use. Uses the standard WLED Wemos D1 Mini installation: https://install.wled.me/ Parts I used: Adafruit 500c powerboost (not 500 basic) AliExpress…
Super easy to set up everything is pressure fit Required Materials 1x MagWled Controller https://magwled.com/?srsltid=AfmBOoqkkn42OHM3vVQy_1Wa_CK77OUqh4FkzuS7uOSNptdE9KkXKZdd 1x WS2812B light strip…
This is a DIY RGB light that uses WLED. This means that you can control the light from your phone, computer, home assistant and others It's very easy to do What you will need 3D Printed parts: diy smart lines controller top.stl (1x) diy…
Case for a 5-24V capable WLED Controller with 2 channels and INMP441 microphone module support. INMP441 microphone module (image below) IS NOT included in the PCB design. You will need to purchase separately. Gerber PCB file is available…
Light base that holds a neopixel ring and ESP8266 running WLED. The tree is not included, this is just the base designed to hold a WS2812b light ring, an ESP8266, and a buck converter to adapt the incoming 5V to the appropriate voltages.…
I needed a box for my 230v to 24v transformer and my GLEDOPTO WLED conrtoller because it is sitting behind the couch and the live wire of the 230v side of the transformer was open. So I constructed this box in Plasticity. Inner dimension…
A simple frame to hold an esp32 module and those cheap 16x16 LED products.
![LED CLOCK - All In One PCB [ powered by WLED ]](https://media.printables.com/media/prints/1087560/images/8400384_36bac17d-349a-4a23-bc82-2803ff15c8cb_6518063f-94a4-47a3-8992-511b5e0981f3/img_0348.jpeg)
![[WLED] Meanwell Netzteil halter mit ESP / Meanwell Powersuply wallmount with space for an ESP](https://media.printables.com/media/prints/111343/images/1096842_455c95d2-c3c2-4014-8ea5-8287614b5ccb/screenshot-2022-01-03-081033.png)
![WLED Sound Reactive Controller (ESP32 32D/E) [CASE]](https://media.printables.com/media/prints/1173660/images/8835453_cce183d8-7869-46aa-8e26-b41835b8b0fe_50d98910-29e6-4b17-8930-3f37d3ae37d9/img-20250201-wa0024.jpg)
