1 / 5
WLED Anjuna logo v3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses WS2812 'NeoPixel' LEDs & white PLA to make a pretty version of the Anjuna logo
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 66
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Components used
- Adafruit QT Py ESP32 Pico
- Adafruit MiniBoost 5V @ 1A - TPS61023
- 1 metre of WS2812B tape (10mm wide, 60 LEDs/m)
I added a 7x7x6mm heatsink to the ESP32 Pico IC (using thermal glue) as it was running rather warm & I was concerned about long term reliability. Turns out WLED sets the WiFi transmit power to the maximum (20dBm) by default & lowering this reduces the temperature of the chip greatly.
I have included a ‘generic’ version of the electronics lid without the hole for the heatsink, which should work with any QT Py/Xiao board.
The WLED Project can be found here.