1 / 4
WLED standing lamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About:
Inspired by this Hue Signe Clone.
I designed the model from scratch. This design uses an internal power supply so that no bulky wall wart is needed. Instead, only a power cable is needed externally, adding to the sleek design.
Additionally, I designed it with an ESP8266 controller, flashed with WLED, in mind for controlling the lights. This way the light can be controlled easily from your phone using the WLED app, or by platforms such as Home Assistant.
There are also places for anti-slip furniture pads on the bottom and internal weight to improve stability.
Bill of Materials
| Quantity | Description | Sources |
|---|---|---|
| 1 | Baseplate | 3D Printed |
| 1 | Top Cover | 3D Printed |
| 1 | Power cable clamp | 3D Printed |
| 1 | ESP8266 D1 Mini | |
| 1 | MeanWell RS-25-5 25W 5V 5A Industrial Power Supply | |
| 1 | 16mm alu corner LED profile | |
| 6 | CNC Kitchen Threaded insert M3 Standard | CNC Kitchen |
| 3 | M3 washer | |
| 4 | Hex socket head cap screw M3x8 | |
| 3 | Hex socket countersunk head screw M3x12 | |
| 1 | Power cable | |
| 3 | (OPTIONAL) Anti slip furniture pads ⌀20mm | |
| 1 | (OPTIONAL) Small zip tie | Amazon Europe Amazon Global |
| User defined | (OPTIONAL) Wheel weights for additional balance |