ESP32 38-Pin WLED Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3-part ESP32-WROOM 38-Pin devkit USB-C case for WLED
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 162
- Makes
- 0
- Views
- 748
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Snug snap-fit case for an ESP32-WROOM 38-Pin devkit USB-C. Hole at the back for a cable (can easily fit a 5mm wide 3-core or anything similar).
This was designed for a specific ESP32 board I got from Ali and couldn't find a nice fitting case for. I've included the picture, but it has the antenna not protruding out of the back of the board. It lists approx dimensions as 54 x 28 x 10mm.
Case comprises of a base, with room for pins and cables, a tray for the ESP32 USB-C to sit in, and a click-lock lid. Lid secures nice and tight, and the board is a perfect fit.
I print mostly in PETG, but it's a fairly simple model so most filaments should be fine.
Hope someone finds it useful :)