ESP32 38-Pin WLED Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3-part ESP32-WROOM 38-Pin devkit USB-C case for WLED
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 162
- Wydruki
- 0
- Wyświetlenia
- 748
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Snug snap-fit case for an ESP32-WROOM 38-Pin devkit USB-C. Hole at the back for a cable (can easily fit a 5mm wide 3-core or anything similar).
This was designed for a specific ESP32 board I got from Ali and couldn't find a nice fitting case for. I've included the picture, but it has the antenna not protruding out of the back of the board. It lists approx dimensions as 54 x 28 x 10mm.
Case comprises of a base, with room for pins and cables, a tray for the ESP32 USB-C to sit in, and a click-lock lid. Lid secures nice and tight, and the board is a perfect fit.
I print mostly in PETG, but it's a fairly simple model so most filaments should be fine.
Hope someone finds it useful :)