Liczymy pasujące modele…
I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Built to suit the wifi multiboard found on Aliexpress:…
Wydruk około 3,10 €–3,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A snap-on case for a NodeMCU v3 that has slots for USB charging and sensor wires. Designed to fit DuPont connectors attached to the NodeMCU's pins. This was my first basic case for my DIY Home Assistant setup. I use it hold SHT3x-D…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
The cover is made for the Ai Thinker ESP32-CAM module. The front covers for the camera are equipped with many holes for better cooling. In the closed version, the temperature on the base plate is very high. For the magnetic holder, I used…
Wydruk około 2,96 €–3,61 € nettoWstępna wycena jednego wariantu
I've been doing electronics for the past 2 years, and one problem I constantly run into is generating a mess of parts all over my desk! My hope is with this print, myself and those who print it will be able to stay organizer while…
Wydruk około 6,50 €–7,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used PETG, 20% infill (10-7% is ok), 0.20mm, 0.4 nozzle. Use 0.15mm for better results. No supports required.
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.25mm nozzle, 0.07mm layers, the pogopins have 1mm max diameter. In this particular case it's actually for reading back the flash and reverse-engineering the firmware (assuming it's not encrypted but I doubt it is). Fusion link…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The goal here was to mount a camera despite using the https://www.printables.com/model/396461-prusa-mini-z-axis-support-brace-by-maxt-remix The other camera mounts I found collided with the Z-axis support. That's why I made this one to…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🔐 Boîtier ESP32 NFC TagReader Voici un boîtier 3D compact conçu pour intégrer : 🧠 ESP32 DevKit (esp32dev) 📡 Module NFC PN532 (I2C) 💡 LED WS2812 🔊 Buzzer 🔘 Emplacement frontal pour bouton Aqara Le tout dans un format propre et discret,…
Wydruk około 5,59 €–6,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Basic case for USB-C version of the ESP32 2432S028 2.8" module, also known as Cheap Yellow Display (CYD) / CYD2USB.
This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…
This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components…
You shoul use a 4 M3x10 screws to secure a screen to the case.
Fits the AZDelivery ESP32 Cam Module Board. There's a good chance other branded boards also fit. Snap fit enclosure Enclosure has holes for the ESP32 cam board pins to hold it in place Use some glue or double sided tape to attach the…
I needed this to design a case for a WLED board so thought I'd upload it for others. It's Parametric (has parameters you can change for every measurement) so you can easily tweak it for your specific board. Hide the aerial if it doesn't…
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
This prototyping board is designed for Arduino and ESP32 development. It fits both a large and a small breadboard, providing a compact and organized workspace for your electronics projects. Whether you're testing circuits or building…
Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini with an VL53L1X / TOF400C sensor and keep the whole thing as small and modular as possible. Later on, the project will be used with ESPHome and…
This case was designed to fit this small footprint ESP32-WROOM-32D from Amazon because I couldn't find a case that fit it. https://www.amazon.ca/dp/B0C9VSYS4N?th=1 I made this in FreeCAD from scratch, but the design is based on the…
Waveshare recently released a new ESP32-S3 screen. Model name: ESP32-S3-Touch-LCD-4.3 . I'm using this screen for my openHASP installation. You can find .ini file here . I didn't have courage to do the soldering job for backlight as…
Case for ESP32 board with external BT/wifi antenna I used as BT proxy from home assistant. Board I used is AZ-Delivery ESP-32 Dev Kit C V4. I re-purposed an ipad usb-c charger and micro usb cable. I'm sure there is a nicer and less…
This is a straightforward two part case for the ESP32-S3 CYD 3.5" display. For assembly you'll need - (4) M3x4 heatsets and (4) M3x8 SHCS.
The purpose of this project is to create an inexpensive audio player for home assistant that can be plugged into an existing stereo speaker system. With this system, you can also build a simple mono amplified speaker that can be used as a…
Introduction I've made another thing for my PRUSA, a robot, but in this case, it's not just a toy. What characterizes the vast majority of my projects is their practical and functional application. In this case, what I've decided to call…
What is this? This is an enclosure designed to house an ESP32 board (specifically, an ESP32 DevKit V1 board), a PMS5003 sensor, and a DHT22 temperature/humidity sensor. It's powered through the ESP32's micro USB port, which is exposed on…
Moin, hier mal ein kleines Projekt, welches ich entworfen habe. Ich wollte einen kleinen ESP32-C3 Super Mini mit einem Waveshare ePaper / e-Ink Display (2.13") kombinieren und das ganze so klein und modular wie möglich halten. Später wird…
Description: Here's a case to house your Waveshare ESP32 C5– for my particular use case, it's running the Biscuit Node Firmware from Biscuit Shop. This is very much a work in progress and still needs some refinement. Please let me know…
Impreso con PLA y sin soportes.
WiFi Weather Station with 8Bit Icons and SFX Print instructions https://youtu.be/4wi6VRrWtLw WiFi Weather Station with 8Bit Icons and SFX. Build a weather station with retro inspired 8bit graphics! Use CircuitPython to display data from…
Note: This is a 3D reference model (dummy board) for CAD work, not a printable object. Accurate 3D model of the ESP32-C6-LCD-1.47 development board. Use this file to design your own custom enclosures, mounts, or accessories around the…
This is a housing I made for an ESP32 (doit esp32 devkit v1) and a BME680 gas / air quality sensor. Parts: 1x ESP32 Devkit v1 (eg…
Info This case is made especially for the Multiboard v2 with ESP32 and AS01 NRF24 Chip on it! Its made press fit, glue is maybe required if board tolerances are too big. What you need to print: 1x Botton 1x Top 1x Slider 2x Button No need…
A very simple version of the XIAO ESP32C3 with only its essential features for printing and testing fit in projects or designing cases. Its a 1 to 1 representation of all the sizes of the original model.
Simple and sturdy ESP32Cam Pan and Tilt Housing. This design features a built-in bracket for a wifi antenna, and allows for pan and tilt giving you the ability to adjust the camera's angle freely. It can be wall using either Tessa or…
This enclosure is made for a ST7735 TFT display module controlled by an ESP32-S2 mini. Wires have to be soldered because there aint much space inside and wont close if used with dupont connectors and headers. External screws are not…
Designed around the Inland ESP32-WROOM-32D using Tinkercad. Includes spacing to read labels for pins, LED cutout, and printable buttons. USB cutout works with the 2 usb cables i tested and is tuned to be relatively flush, but may require…
Enclosure for ESP32-S3 made by Waveshare with functional buttons and LED lights. It has been tested with multiple USB-C connectors, so far all fully engage and match well. Fully 3D Printed, Top Cap closes with friction fit. Printed…
This is a straightforward two part case for the Freenove ESP32 CYD 3.2" display. For assembly you'll need - (4) M3x4 heatsets and (4) M3x8 SHCS.
Bambulab Esp32 LEDController See your Printer Status anywhere if there is Wlan and a 5V Powersource! Also there is a Webpage where you can see the Printerstatus and also control it! NEW! Added OBS overlay Website to Display the Printer…
This is a tiny case for a XIAO esp32c3 board with room for the wifi antenna and a AHT20 + BMP280 sensorboard (Ali). the pcb's are held in place with a clamp and can easely be installed and removed. the case back snaps to the top without…
The solution consists of an ESP32-Cam flashed with Tasmota. A good description of how this works can be found here: https://cgomesu.com/blog/Esp32cam-tasmota-webcam-server/ To upload the MJPEG images from the camera to Prusa Connect, I…
I've been building a lot of stuff over the years that need USB power and never found a suitable standalone enclosure solution so I've set about designing my own. Goal was to take some common AC to USB power supply and wrap the project…
I saw the model "ESP32-C3 "supermini" case for simple led strip" that @tigert_36892 had made, and thought that what it lacked was the ability for the buttons to be used. Aside from that it was a geniously simple design. So I started…
What is it? It's an as-small-as-possible case around the “Kasiin NRF24+ESP32 Multi board v2.6” for the Flipper Zero. Use the pin guard to keep it in your pocket without the pins suffering. Comes with the Fusion 360 file, so you can make…
i made this case for esp32 cyd 2 usb and you cat also use for this case nrf24 and cc1101. you can print it with 0.4 0.6 nozzle you can print it 0.16 to 0.25 layer height you can print it with pla or abs (also petg) you dont need bolts for…
IT IS STILL A WORK IN PROGESSS, it works, but i wish to add more improvements. I will continue as soon i will have time, i have just moved home after 3 years, there are more important things to get done around the house. Plus new…
This bracket is for mounting an ESP32-Cam microcontroller in a bird nesting box. There are fixtures for 5mm LEDs. I use infrared LEDs, so the camera can be used in the dark without visible light. However, this requires a small…
3D case for Flipper Zero WiFi Multiboard NRF24+ESP32
Case for ideaspark 1.9 display https://www.amazon.com/ESP32-Development-1-9-inch-LCD/dp/B0D6QXC813 Update 26.7.2026 added version with buttons I used the box for my project: https://github.com/MarioHP/telemetry-monitor-flasher
Speficication ESP32 Camera Camera Module + ESP32 Printing PETG/ABS/ASA 50mm/s Printing Speed 40% Fan 0.4mm Retraction Lenght 0.5 Z hop when retracting 150mm/s Travel Speed
A minimal, precise, and functional enclosure designed specifically for the ESP32-C3 SuperMini board. Engineered to fit like a glove while keeping full access to connectivity and board features! ✨ Features & Technical Specifications…
This is an ESP32-CAM box, made specifically because no other case existed for what I needed
my cyd esp32 build around 5 000mah power bank and usb-c with a switch https://tinyurl.com/4yzu3psy (link for cyd esp32 on temu) https://tinyurl.com/y5ft2b63 (link for usb-c with a switch i used as power button) i couldn't find the…
A clean mounting bracket for ESP32-C6 boards with integrated LCD display. Designed to be mounted into a project enclosure with the display facing outward through the cutout. Hardware required: 4× M3×6 self-tapping screws (enclosure…
Zigbee Macropad – 16-Key Wireless Controller for Home Assistant A compact 16-key Zigbee macropad powered by an ESP32-C6 , designed specifically for seamless integration with Home Assistant via Zigbee2MQTT . This macropad provides tactile…
DIY security camera. This is a housing for a security camera based on an esp32 cam module. Housing is big enough module with pins soldered and esp-MB attached). there are ventilation holes because the module can get hot. there is a…
The microcontroller can be mounted with or without pin header. Additional for the terminals you can print spacers to place them in right position. Useable terminals:…
🔧 Full Description More versions available on my profile – check them out ✔ Supported Hardware: ESP32 30-pin development board (standard size) SN74AHCT125 logic level shifter (or compatible) INMP441 digital I2S microphone 3x SPL-1 / LT221…
This enclosure was built to house the ESP32 and sensor that measures humidity, temperature, pressure, among other things for use in HomeAssistant. You can print in PLA as it is used in room temperature indoor conditions. This is designed…
The triangular-profiled ESP32 enclosure with WS2811 LED strip offers a stylish and functional solution for housing decor
This is a basic case for the Espressif esp32-s31 Function-Coreboard. Screw holes are M2.5, perfect fit for SPAX Universalschraube 3x12mm T-STAR plus VG. Print tested with PETG without supports, works fine. Quite basic just with holes for…
Hello, I have a few of these breadboard temperature and humidity sensors all around my place. I figured I'd create a cool little case for it. This requires 4x M2x6 to close the top panel. Half-sized bread board fits perfectly. You will…
A simple small enclosure for an ESP32Cam with tripod mount. It has no opening or room for the SD-Card as i don't use one. The light can only be used as an indicator because the enclosure has just a little hole for it. The position and…
This is a custom-designed holder for the ESP32-CAM module. It features two M3 holes with a 20mm center-to-center distanc
The microcontroller can be mounted with or without pin header. Additional for the terminals you can print spacers to place them in right position. Useable terminals:…
Case designed specifically for the ESP32 with slots for two Grove LoRa E5 modules.
The microcontroller can be mounted with or without pin header. Additional for the terminals you can print spacers to place them in right position. Useable terminals:…
I had an ESP32 Devkit1 on hand (dimensions are roughly 28x52mm) that wouldn't fit the recess in the original version. So, I resized the recess, added 4 mounting holes for m2.3 self-tapping screw, and changed the usb-c to micro-usb for…
Wi-Fi Remote Control for WLED with ESP32 C3 SuperMini – Ultra Slim and Universal In this project, I show you how to build a super compact and ultra slim Wi-Fi remote control based on the ESP32-C3 SuperMini, designed to control any…
I love this system and I really like working with a breakout board, so I created a module that allows you to use your breakout board with this system.
Custom slot loaded ESP32 holders that slide into a track module designed to hold 4, 6 and 8 ESP32s. This module is for use with the microRACK homelab setup . This was designed ot experiment with Nerdminer however it's intended for any…
A Bart Dring 6X CNC controller case design I made for my own use. For ease of swapping out the controller, I built the wiring around a 26pin “aviation” connector to be able to just take out one controller box and insert another without…
found these led drivers that are an all in one for wled, small , made this deeper to allow for the controller to fit fit, had to drill hole to fit plug, might mod a hair deeper and make hole better for power plug. thanks to OP for making…
This is a updated enclosure for a ESP32 and development board. It has a snap fit lid, And the board screws into place. I made it to house my WLED controllers. It has wire guides around it also and a screw in place clamp if needed
Full enclosure for the ESP32-2432S028R. Gives you access to majority of the ports on the device and has tabs to depress the buttons on the underside. For the assembly you will need (4) - 3x5x5MM heat set inerts and (4) - M3x8 SHCS
After trying various webcameras in different positions, I’ve learned that ultra-high definition isn’t necessary. And placing the camera away from the heated bed or toolhead may not capture the most exciting angles, but it’s definitely…
Description Simple design of enclosure for WLED ESP32 Enclosure with microphone Used components: ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi https://amzn.eu/d/9D1nSNl SP32 Breakout Board GPIO 1 into 2 Compatible with 30 Pins…
More info on https://pihrt.com/elektronika/484-wi-fi-matrix-analyzer or https://pihrt.com/elektronika/483-wi-fi-matrix-8x8x8-svetelna-tabule
i have fixed the development board on the adapter with a little double adhesive rubber.
This model is a 3D-printable guantelet/forearm armor designed with a focus on simplicity, modularity, and expandability. The overall structure is made up of clean, easy-to-print shapes that minimize print time and support requirements,…
Things Used: (non affiliate!) ESP32_DEVKitc_V4 M2.6 Head Self Tapping Wood Screw Category: Gadgets
You can grab a code and get more info about the project here https://github.com/Andryushik/blinds_homekit_esp32 Created for regular window blinds. With Planetary gearbox (you need 3 x planet_gear for 1 set). You need three M3 bolts with…
This is a case that will hold all the things to power your led lights(or anything else that needs an esp32) and keeps everything in one neat case. Many of the parts are things I had laying around, I will include links to the things I used…
i am using the devkit esp32 from here: https://www.aliexpress.com/item/1005001666897038.html?spm=a2g0o.order_list.order_list_main.10.55b81802Jj8U0Y
ESP32_TOTP 🔐 A compact, secure TOTP (Time-Based One-Time Password) generator built on the ESP32 platform for two-factor authentication (2FA) systems like Google Authenticator. Displays time-based codes on a small OLED screen, synced with…
A compact ESP32 WLED enclosure that I made - Powered by USB-PD. Just stick this somewhere under your desk. Feel free to remix on TinkerCad . PARTS LIST ESP32 USB-PD Trigger WS2812B RM065 Pot 2 X Tactile Push Buttons 4 X M3*16 screws…
Full enclosure for the ESP32-2432S028R. Gives you access to majority of the ports on the device and has tabs to depress the buttons on the underside. For the assembly you will need (4) - 3x5x5MM heat set inerts and (4) - M3x8 SHCS Both…
The MusicBox is a screen-free audio player for children. Place an NFC card on top and the story or the music starts, take it off and it stops. No subscription, no account, no screen: your audio lives on standard NFC cards and every part…
I designed this due to not finding a fitting case for my last Project. It has a cable outlet with a 16mm thread for a cable gland and a hole for the usb-c port. The NodeMCU-Esp32S is supposed to fit from above, stands on two little towers…
Modular Electronics Mounting System Tired of messy electronics projects with loose components and tangled cables? This modular mounting system was designed to create clean, organized and expandable electronics setups for prototyping and…
DeskWiG (Desk Widget) is a 3D printed enclosure for a small ESP32-S3 desk display with a 1.9" IPS screen and an optional rotary encoder knob. It shows server pings, a clock, weather, stock prices, Home Assistant sensors, or anything with…
Case designed for the ESP32 WROOM DevKit C-32 board
Caja con tapa y soporte de Powerbank para integrar la placa ESP32Steamakers con modulo Lorawan y pantalla 1,3 OLED de Innova Didactic/Keyestudio. Tambien para pantalla OLD 0.96" Nota: El soporte para la Powerbank necesita soportes para su…
Changed the original lid to fit when SD card is inserted.
This is a simple enclosure for Guition ESP32-S3 display. Designed to be printed with 0.2mm layer height without supports. Requires 4 M3x8 screws. The screws goes directly into plastic. I printed mine with ABS and even with plastic…
Housing made for ESP32. There no mounting holes for the esp32 because the esp32c3 versions from Seeed doesn't have mounting holes zo i fix them in place with a little hot glue. My first remixing a model without any experience.
Case for the 4channel ESP32 Board with cutouts for access to the screwterminals and GPIO headers. Basic information is written on the lid. -print with PETG -layer hight 0.2mm, no infill Two M3x12 screws are needed.
Case for the Olimex ESP32 POE ISO rev K Remixed from https://www.printables.com/model/264188-olimex-esp32-poe-iso-case
![[UPDATED] ESP32Cam Pan and Tilt Housing Case](https://media.printables.com/media/prints/9c506c59-a96a-40e8-921e-50b42dfc07da/images/12891245_6c3c4e68-56b4-4355-8149-ce97cef7c55b_1052c891-a953-4859-86eb-0af72baae69c/pxl_20260510_134038296mp.jpg)
