Assembly for ESP32 and HCSR04
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design integrates the ultrasonic sensor HCSR04, a printed board with a ESP32-wroom and a DHT11 sensor.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 907
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I started with [thingiverse/thing:3738687 by SantiMZ], and added an assembly for the ESP32 and the associated electronics. All parts are inserted in a standard PVC pipe which is fixed on top of a water tank. A mobile cover protects the assembly.
I wanted to be able to tune the horizontal plan of the ultrasonic sensor, from the top; this explains the ‘tricky’ vertical supports. During the design of these, I used the ‘mirror’ copy feature with Blender which ends with turn left screws; those are indicates in red colors.
All parts are printed in PETG with 0.2mm layers. "Vertical supports" are printed with bed support.