Case for ESP32-2432S028R (AKA Cheap Yellow Display)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the ESP32-2432S028R, also known as the Cheap Yellow Display.
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 981
- Wydruki
- 1
- Wyświetlenia
- 12 128
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I needed a case for the CYD (Cheap Yellow Display) that was thin enough to use 180° USB adapters. The existing cases was too thick so I designed my own one.
The case have a cutout for the RGB LED on the backside and “buttons” for the reset and boot buttons on the PCB. The case is designed for self tapping screws.
There are 2 variants of the case:
- CYD: Original CYD with micro USB connector
- CYD2USB: Newer CYD with both micro USB and USB-C connectors
The SD version adds a slot for the SD card.
The “Cheap Yellow Design” was named by Brian Lough, and you can find plenty of reference information and code snippets on his Github:
https://github.com/witnessmenow/ESP32-Cheap-Yellow-Display
As usual I have included the original Fusion360 files if you need to make changes.
The 180° USB adapters I used is this one, the A type.
https://www.aliexpress.com/item/1005006419937628.html
Note: My design is heavily inspired by this design, but I did do my own Fusion360 design from scratch:
https://www.printables.com/model/685845-enclosure-for-sunton-esp32-2432s028r-cheap-yellow-