ESP32 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ESP32 Type C Case with two tops, one closed, one with access to the headers.
- Ocena
- 4,667 / 5
- Polubienia
- 91
- Pobrania
- 1129
- Wydruki
- 6
- Wyświetlenia
- 6616
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I got myself some ESP32 to use as a bluetooth proxy in Home Assistant and needed a case for them.
The ones I found online were not really what I was looking for or weren't for the board version I got.
So I designed a case myself. It is a tight fit (around 0.2mm clearance betweent bottom and top).
I made two top parts, one with access to the headers on the board and one which is fully closed.
I also accounted for the boot and reset button on the bottom part, in case you need to press them with a paperclip or another pointy thing.
The USB-C port is completely accessible (as you can see in the last two pictures).
Printing
I printed the case in PLA with 0.24mm layer height, 20% infill and 3 perimeters.
Bottom and fully closed top needed around 12,5g of filament and took around 39 minutes to print on my Ender 3.
ESP32 I used (Amazon.de, no affiliate link)