ESP32 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ESP32 Type C Case with two tops, one closed, one with access to the headers.
- Rating
- 4.667 / 5
- Likes
- 91
- Downloads
- 1,129
- Makes
- 6
- Views
- 6,616
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I got myself some ESP32 to use as a bluetooth proxy in Home Assistant and needed a case for them.
The ones I found online were not really what I was looking for or weren't for the board version I got.
So I designed a case myself. It is a tight fit (around 0.2mm clearance betweent bottom and top).
I made two top parts, one with access to the headers on the board and one which is fully closed.
I also accounted for the boot and reset button on the bottom part, in case you need to press them with a paperclip or another pointy thing.
The USB-C port is completely accessible (as you can see in the last two pictures).
Printing
I printed the case in PLA with 0.24mm layer height, 20% infill and 3 perimeters.
Bottom and fully closed top needed around 12,5g of filament and took around 39 minutes to print on my Ender 3.
ESP32 I used (Amazon.de, no affiliate link)