941 models
3D printed double helix lamp printing hints: all 3d parts can print without support, only add brim to some parts (diffusers and helix, but I printed diffusers without brim), I printed this diffusers with glow in the dark PLA in vase mode…
Recently I received some strips of RGB lights. A few days after putting them up I found myself loosing the remote quite often. I needed a simple, good looking, remote holder to stop me losing the remote in future. I hopped online and…
I saw some RGB-Stripe lamps and i wanted to create one on my own. So i tried it wth the Marvel-Logo and i think it looks great :) Total printing time approx 100h and 900g PLA. You can use any RGB-Stripe, i bought this:…
This is a 3D Printable model of a Fallout 4 Mini Nuke which has provision for a Bluetooth speaker and RGB lighting in a translucent top that can be used as a nightlight or just as a display piece. Re-Mix Notes The Fallout 4 Mini Nuke…
A colleague had some spare 120mm RGB LED pc fans lying around and he asked me if i could create a holder for them to be used as a ventilator. He wanted to be able to control the fan speed and the LED color as well. What began as a quick 1…
J'ai conçu des clips de 30 mm de longueur spécialement pour accueillir les connecteurs ARGB/RGB, garantissant une fixation sécurisée et fiable lors de vos montages. Grâce à leur conception innovante, ces clips ne nécessitent aucun support…
A Simple & Extremely Useful, Fast Printing RGB LED Light Strip Remote Control ‘Holster’ Update: Now includes a second model for the larger/ longer remotes that seem to be pretty common measuring 125 x 58 x 8mm It features ‘vents' at the…
My video about this project: https://youtube.com/shorts/o-M_Fgu40zc?feature=share Parts List: 1-2m Addressable 5V RGB Strip ( I used about 1.1m of WS2812B 60 LED/m strip ) Some M3 Screws ESP8266 with Installed WLED ( Can also be ESP32 )…
VERY IMPORTANT NOTE This is not a simple print, assemble and enjoy project. It requires quite some experience, basic knowledge in electronics, a good amount of patience and probably some nerves (it's worth it!). I'll try to give you as…
This is a beautiful mood light based on a RGB LED strip and a ESP8266 as controller. https://www.youtube.com/watch?v=rVWFDmi\_Bek Lamp Shade The shade is a remix of Wave Lamp Yeah! by brico3d. It has been scaled to 140% and oriented…
15.01.2022 update This is my version of iFlag display working with all popular simulation games like iRacing, AC, ACC, Dirt Rally, witch SimHub open source software! For this project you need additional Arduino Nano unweld board, piece of…
Hi! Due to the gift I received from Bambu in the form of "Remote Controlled 16-color RGBW Puck Lights", I decided to remix my previous "Minecraft Ore" model to attach these LEDs. The lamp has a size of 120 mm x 120 mm x 120 mm. Fits…
This model is a lithophane globe model of the Earth. It uses NASA imagery to accurately depict the continents and oceans. I have added some elements to the oceans to make them more interesting since they take up a large portion of the…
lThis is an OpenSCAD design for sign letters, to be lit with commonly-available adhesive RGB LED tape (specifically this stuff from BTF-Lighting on Amazon, though any similar tape is probably compatible especially with parameter…
Simple holder for RGB LED remote controls with a width of 51.7 mm. For mounting use double sided adhesive mounting tape (of approx. 1 mm thickness). No support required. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
The lamp is mostly 3D printed, and is easy to assemble. It uses an array of WS2812B individual addressable RGB LEDs, which gives it the ability to not only show every color, but also in different effects, like simulating a fire. All of…
Picked up a set of the Govee RGBIC permanent outdoor lights but I'm not a big fan of the idea of using the adhesive. Partially because I don't want any residue to clean up in the future should these lights fail or loose their appeal and…
A simple box for one Shelly RGBW2 LED strip dimmer module and one 5-wire Wago splicing connector. Mounting holes for 2 screws inside. You need 2 flat-head M3x16 screws for box assembly. Jednoduchá krabička pro jeden stmívací modul Shelly…
This part is a remix from this rial bracket: https://www.thingiverse.com/thing:4435764 I put the clamp in to a box, added Thread Inserts and a strain relief. Printing: PETG (for no special reason) 0.2 mm no supports Parts using Inserts:…
3D printed case for use with standard MX style switches. Uses standard screws and stand-offs, just replace the bottom acrylic plate with this. The photo's show a multi material print with clear ABS for RGB diffusion. I've remixed this…
UPDATE 2025 New lampshade, HomePod style But it not easy to print, need use support with non-stickable material (PETG+PLA or special support) New top cup available! Smart RGB LED Lamp with ESP32 and WLED This customizable 3D-printed RGB…
Mir haben die bisherigen Fernbedienungshalter für LED RGB Fernbedienungen nicht gefallen, deshalb habe ich diesen hier konstruiert. Er bietet viel Platz für doppelseitiges Klebeband, ist leicht zu drucken und hat einen guten Sitz für die…
NB: New updated version available here: https://www.printables.com/model/1148094-modular-rgb-led-sign-version-2 Modular sign based on a RGB LED strip controlled by Arduino and encoder. Hopefully this video will walk you through the build…
I created a remix for this project: https://www.printables.com/de/model/62043-rgb-double-helix-lamp-easyprint I have add a USB-Micro PCB Socket, because I wanted to save myself the cost of an extra power supply. You can buy the Sockets…
A Turbine-like lamp with RGB LED lights Video: https://imgur.com/Qd0Y0tP Print instructions Print instructions Fins Roughly four hours per fin 0.3mm layer height 15mm brim Use a matte white filament, I used Prusament Vanilla White PLA 2…
This is a closed, full case for the Sofle RGB split keyboard. https://josefadamcik.github.io/SofleKeyboard/build_guide_rgb.html https://github.com/josefadamcik/SofleKeyboard/tree/master/Sofle_RGB Features: transparent bottom for the drop…
These are the files for a minimalistic RGB Lamp which you can control through WiF i from your smartphone or computer. It is also battery-powered and can be recharged using USB type C . You can find the FULL instructions in the YouTube…
Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…
Update: Adding a NEW V3 VERSION with a full length that runs along the entire bottom edge of the xLCD cover and guides the light perfectly along its entire length. Adding a NEW V2 VERSION that is shape improved and the diffusion part is…
Does NOT work with the Scimitar RGB as it has different layout for the main buttons and screws. Unfortunately, without buying one I cannot make a model specifically for that one. It works with Scimitar RGB Elite, and should work with…
Мой вариант корпуса для проекта Alex Gyver " Gyverlamp ". Ссылки на проект: группа в vk , github , сайт автора . В этой версии плафон печатается на 3D принтере. Версия с литым пластиковым плафоном . Документация / Documentation
Case for Seeed's Grove RGB 16x2 LCD Display. I used M2 x 14mm screws but #2 x 1/2" thread forming screws would probably be better. Update 2019-03-10: Added a new version that is designed to be mounted on a flat surface (3/4" MDF board in…
BigTreeTech Mini 12864 RGB LCD enclosure I am very happy to present you a versatile simple enclosure for the LCD screen => BigTreeTech Mini 12864 RGB. The purpose of the design is: to have a case without visible screws on the front face.…
This is my take for a Shelly RGBW2 holder. It is compact as i could do it , leaving space for screws heads. I hope you
This is a very easy print, all you need to assemble the project is some glue and 5 m3 (6-8mm long) screws. If you don't have the screws you can just glue it all. You can use an esp8266 (nodemcu) to program it with WLED and be able to…
Original file from Milo Mindbender E14 RGB Lightbulb (50mm head dome): https://www.amazon.es/gp/product/B07SHFRB8W/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 Magnets (8mm x 3mm):…
Print it laying down. put the leds in the slots and wire it up. diffuse it from the front side
The goal of this project was to make a simple Palladium Arc reactor model as seen in Marvel’s Iron Man I en II. Although there are many beautiful and very well-designed Arc reactor models available, many of them involve soldering LED…
This is a really nice Rammstein cube lamp you can put rgb lights into it. For a better shining effect use transparent paper for the inside.
A customizable DIY macro keyboard with RGB backlight and USB C, which uses cherry mx keys. Features RGB backlight Fully customizable Compatible with all cherry mx keycaps USB C Simple assembly Cover for transport included No supports…
These parts mount the Shellies vertically on a DIN rail to save space in width on the rail. The shellies are meant to be slid in from the front and snap into place once fully inserted. The snaplock onto the DIN rail is purposely quite…
Als großer Quattro- bzw. Audifan musste ich einfach so ein Logo haben. Und da es bestimmt nicht nur mir gefällt, teile ich es mit euch. Über eine kleine Spende würde ich mich sehr freuen, ist aber natürlich kein Muss! Wer gerne etwas…
The Voron V0 LED strip 2.0 is an upgraded version of the previous model, featuring a simpler design that is easier to assemble. It also has more RGB LED lights, allowing for a wider range of colors and lighting effects. These improvements…
This is a simple design to hold those common IR RGB LED remote controlers. Print settings that I used just for reference: Material: ABS Layer Height: 0.25mm Printer: Voron Trident
RGB matrix case Diffuser (print in place with color change) Case stand Back frame to fit esp32 dev boards, mini bread boards, etc Printing Instructions Please use white filament for diffuser. The case & stand can be printed from any color…
I have scaled up to use another larger RGB lamp. Turned out nice. linked below. https://www.aliexpress.com/item/1005003130022683.html
Did you install the Govee Permanent Outdoor lights only to discover that you're being blinded through your window? Well, here's the fix for that. This model can completely black out individual lights, or work as a diffuser. It all depends…
Update 1/25/2025 - updated the firmware in the latest QMK build environment for the promicro, added .hex file and archive for the QMK build env in Linux. TheUltiPad MK2 - Now with OLED Display and RGB Underglow! I have loved using my…
I was building a custom PC, and I thought there was a risk of a short circuit with the ARGB pin connector exposed, so I designed a connector cover. Print Settings: Material: ABS Layer height: 0.20mm Supports: no Perimeters: 2
I wanted to build a nightbed lamp for my kid, but all the previous neoboard-related designs seemed designed to be hang on a wall more than to be used by a 5 year old... so I built a new frame with a wider bottom side. Instructions for the…
A simple and fast Solution for everyone, whose Desk or Rack is too small to reflect the RGB Status LED underneath the xLCD on the XL or the MK4. For assembly you can use the original two screws for fixation of the xLCD circuit board.…
Attaching the WS2811 ‘bullet’-style RGB LEDs to your rain gutters can be a pain. I tried using the ‘universal’ gutter clips from the home improvement store that are sold around Christmas time. They didn't last, didn't hold, and were so…
Welcome my 3d friends :) I designed a LED RGBW Circle with a nice printable clear and minimalistic design. You can control it with an App for Android or iOS via Bluetooth. There are hundreds of different mods. You can use it also as a…
The RGB Blaster for the Famicom has a wobbling problem. Previously I created the RGB Blaster Stabilizer so that you can slide it in and fix the issue. This new design will attach permanently the to the RGB Blaster itself and provide the…
Design I designed a bracket for the PC Engine GT, to hold a 3.5" LCD perfectly centered if you are doing a screen upgrade. Print LCD You need to print the "Bottom_LCD_Bracket", and then depending on the driverboard, the accompanying…
Ich lebe in einer Region wo Bergbau schon seit hunderten von Jahren existiert. Viele Traditionen verbindet unsere Region und macht sie einzigartig. Ein solches Symbol ist beispielsweise eine Lore aus dem Bergbau. Ein sogenannter "Hunt".…
Most filament saving rgb-led remote holder you will probably find. Deisgned to be printed with 0.2mm Layerheight and 0.4mm Nozzle . Also made a variation for 0.3mm but this one uses slightly more filament (3.6g vs. 3.08g) - on the other…
UPDATE *** 24-Oct-2023 I was able to get a print made where the pedal actually worked with TPU. I increased my perimeter lines to 4 lines and kept the Concentric infill. This allowed me to get plenty of air to the trap and get the doors…
When working on a project involving WS2812B adressable RGB strips, I found that I couldn't solder worth a damn. I decided I would 3D print a clip to just connect the wires to the contact pads on the RGB strip. The teeth on the lever will…
Small (5.25" / 133.35mm) clock and art display built with 60 RGB LEDs, controlled with an ESP8266 using the FastLED library. Fully open-source, and programmable over Wi-Fi or micro USB cable. Build your own, or buy a kit from Evil Genius…
🌵 Cactus RGB LED Lamp – 12V Light with IR Remote A decorative cactus-shaped lamp designed for use with a 12V RGB LED strip and IR remote controller . This project is easy to print, easy to assemble, and makes a colorful addition to any…
The goal of this project was to make a simple (new element) Arc reactor model, as seen in Marvel’s various Avenger’s and Iron man movies. Although there are many beautiful and very well-designed Arc reactor models available, using the new…
Update: I added a .STEP and .F3D model file to this project if you wanted to modify the model itself. A wall mounted LED RGB Remote holder. The holder is designed to be a tight fit and use 3M Command Strips to mount it. The remote is…
Angled Fan Mount for PC Fans (120/140 mm) This mount allows you to install fans at an angle inside your PC case. To use multiple fans, simply print additional copies and place them side by side. This lets you direct airflow precisely to…
Adjusted model to fit Shelly RGBW PM Plus since the RGBW2 got discontinued.
Doing a Marvel Snap tournament at work and wanted to make a cool trophy. I'm not a modeler, but I hollowed out the model and removed the stones. Each stone diffuser has a single WS2812B glued to it and everything is wired up to a ESP8266…
Printable plate that allows switches to click into place.
Light shades for the Chihiros WRGB II series aquarium light. 1x per side for WRGB30 II 2x per side for WRGB60 II
Rafts: No Supports: YES Nozzle: 0.4 Resolution: 0.16 - 0.28 Infill: 10% Filament: PLA in White or transparent
PRINT INSTRUCTIONS: You Will be printing the Tray and the Tenting Piece. I used Prusa Mini+ for all my parts For my Tray, I believe I used a 15% Gyroid infill, and Galaxy Black Prusament PLA, but it should be an easy print with any other…
I made this phone stand that easily attaches to the Corsair K65 / K70 RGB (Mk 1) keyboard. It may also fit other corsair keyboards with the same tooling. I provided different sizes as .stl in the downloads, but you can also do your own…
This diffuser is designed specifically for the 4pin WOWLed magnetic 30cm RGB light strips that you can get from amazon they come in a three pack with a three way adaptor. If you print these with a translucent white filament they diffuse…
Remix of the Mantis toolhead to keep some of the features I liked from the SB
Designed for 60led/m ws2812b IP30 led strip (250mm section needed) To install, first solder 3 conductor cable to 250mm led strip (15 diodes), then remove top aluminium extrusion, insert the cover with the strip into the slot (its a tight…
Remixed this from AWSW great model https://www.printables.com/de/model/450556-wordclock-16x16-led-matrix-2023-v3 - here you can also get his neat Arduino Software to operate. I only remixed DE+EN Fronts so far, other languages would take…
A case for the Pimoroni RGB Keypad. Aiming to use it as a macro pad. My thoughts on where to go next... a display? Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament:…
Description PDF Feel free to visit us on our page for more projects, https://www.facebook.com/CN3DP/ HEPA/Carbon filter box for the Bambu Lab X1C 3D Printer. Kudos to the previous designers, for the great idea to have a modular filter…
A keycap for Cherry MX RGB Switches, which can be illuminated through an insert. I've printed the keycap in matte black PETG with my Prusa MK3S and the insert with clear resin, but it should work with translucent filaments as well. I've…
Remixed a design by user Kevlarr on thingiverse to fit 12mm RGB LED strip lights to go on the top of the Ender 3
Bonjour la communauté ! Voici un design simple et efficace de connecteur 4 broches pour bandeaux LED RGB avec protection en silicone ou sans. un modèle standard un modèle en L Prévu pour câble électrique Diam 1.4. Aucun outil requis, ni…
The Cute Skull Lamp by rayjizza is an amazing piece of work and when I saw it I knew a friend of mine would absolutely love to have one so I decided to make one for them, but I wanted to give my friend the option of choosing various…
I really liked the original model, but after starting to print it I noticed it had a number of flaws or incompatibilities with my kit ( https://a.aliexpress.com/_EHHvSdO ), so I fixed it. This version works for sofle keyboards that use…
Hi guys! I spent a lot of time searching for a ready-to-print file for Chihiros WRGB 2 side shades, with no luck. If you're familiar with the hobby, you probably know, that this particular lamp has dedicated front and back shades and none…
See https://github.com/SMerrony/picopanel for a project using this case.
Two flavours are provided: With screws holes and a rear port for the power cable, intended for mounting directly to the case (eg. Gaggia Baby, or other machines made of less magnetic, or nonmagnetic material) With 6mm holes for magnets in…
Transform the underutilized cubby in your 12th-generation Ford F-150 (2009-2014) with this custom insert designed to mount the Auxbeam AR-800 RGB Switch Panel. This is a heavily modified remix of a model originally found on Thingiverse…
In this video I show you how I created this RGB LED lamp, in an easy way and with cheap components. Without Arduino or programming. I hope you like it! CIRCUIT DIAGRAM: https://1drv.ms/u/s!AhIDisKDYRISihUcivrIcXZvgJ_7?e=rqC2S1 COMPONENTS…
Govee RGBIC light mounts
Wall mounts for the Adafruit RGB Matrix Portal Series. 4mm (tested) 5mm (tested) 6mm (untested) Print instructions Print with wall side down, 0.2mm layer height on Prusa MK3S with 0.4mm nozzle works well.
A DIY 7-segment clock built with WS2812b neopixels, ESP-32, FastLED library and 3D printed parts. Code and Build Intructions Features: Fully 3D printed, using only 2 types of PLA filament and a few M3 screws. 3d printable on small 3d…
Minimal wall mount for the Shelly Plus RGBW PM controller. Should also work for other Shelly controllers that use the same dimensions. Retention clip on terminal side allows for mounting in any orientation. Printing suggestions: Height: ≤…
This model was inspired by a project by Pinklumenade that she used to sell but is no longer available, and that I originally saw in a Shirobon stream. I made the models my self and they are very barebones, there is currently no way of…
This replaces the LED and switch mount for MAME KOF American Type Push buttons. Video example: https://youtu.be/QJ1OX\_ZHtn8 Buttons: https://www.aliexpress.com/item/33001974422.html LEDs: https://www.aliexpress.com/item/32960205936.html…
Die ist eine Wand Halterung für Govee Wandleuchte WiFi RGBIC LED Lightbar This is a wall mount for Govee Wall Light WiFi RGBIC LED Lightbar Print Settings Supports: No Resolution: 0.2 Infill: over 15%
A slipcase designed to hold the RGB30 and prevent the joysticks or buttons from being jostled or pressed. It is built to be printed from the long side up and features: Channels to hold and protect the joysticks and buttons A finger hole…
Simple Shelly rgbw2 holder, glue strip did not hold, so I made this. No supports needed. Category: Tool Holders & Boxes
Project: DE: https://simracing-pc.de/2024/12/18/diy-projekt-simracing-spotter-lights-simhub-arduino-mit-30-leds/ EN: https://simracing-pc.de/en/2024/12/18/diy-project-simracing-spotter-lights-simhub-arduino-with-30-leds/ Web:…
Showcase your custom pixel art, scrolling text, and dynamic animations with this sleek and versatile enclosure, designed specifically for a flexible 8x32 WS2812 RGB LED Matrix. This case provides a sleek and professional look and durable…
Case for LILYGO T-RGB round touch display development board. There is a cutout for usb connector and sd card You need 4 pcs M2 threaded inserts and M2x20 (v1 M2x8) sink screws to mount the rear lid. Also some thin foam (sponge rubber) so…
This model is a remix from thingiverse user boxter. It can hold a Shelly Plus RGBW PM on a 35mm Rail.
