RGB Voronoi Lamp (WLED)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple ESP based RGB lamp with Voronoi Shade that can be controlled via Wi-Fi
- Rating
- 4.5 / 5
- Likes
- 813
- Downloads
- 1,799
- Makes
- 8
- Views
- 11,234
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
My video about this project: https://youtube.com/shorts/o-M_Fgu40zc?feature=share
Parts List:
1-2m Addressable 5V RGB Strip ( I used about 1.1m of WS2812B 60 LED/m strip )
Some M3 Screws
ESP8266 with Installed WLED ( Can also be ESP32 )
5V Power Supply ( I used 1,5A Smartphone Charger with USB cable )
Mini Rocker Switch ( Mounting hole is 13.3 x 8.6mm )
USB C Female Connector
“Base” and “Voronoi Shade” components should be printed in a standard mode, “Vase Shade” and “Vase Tower” parts should be printed in Vase Mode. I used 0.6mm nozzle for printing the Shade, but if you want more light to come through, use narrower nozzle like 0.4mm. Important, for the “Vase Tower” increase the number of bottom layers to 14 if printing at 0.2mm layer height.
