LED / RGB Remote Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make sure you read the description for more information :)
- Rating
- 5 / 5
- Likes
- 71
- Downloads
- 462
- Makes
- 9
- Views
- 1,405
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Recently I received some strips of RGB lights. A few days after putting them up I found myself loosing the remote quite often. I needed a simple, good looking, remote holder to stop me losing the remote in future. I hopped online and couldn't find any good ones so got to work designing one up in fusion 360. I even attempted making it parametric so use that at your own risk. The provided .stl's worked well enough for me though.
Please consider leaving a like as it means a lot to me, 2 seconds of your time for 20 minutes of mine seems like a good deal.
Update Log:
Date: 24/12/20
- Added a version 2 of the "case back" with tighter clearances and 2 holes for some countersunk screws. The diameter of the holes is modelled at 3.5mm. If you need them bigger / smaller then drop me a comment. Also updated the print file with the new "case back". Warning: This updated model has not been tested be me yet, if it works well for you please let me know !
Print instructions
Printer: Prusa MINI
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Filament: Prusament PLA / PETG
Additional Comments:
The dimensions of the uploaded .stl files are optimised to be printed at 0.2mm layer height. The pre-sliced file is also at 0.2mm.
I printed mine in PLA for the back of the holder and PETG for the front. This is just because I wanted it in 2 colours.
Happy Printing !