1 / 1
DIN Rail Mount for Shelly 2.5 and RGBW2 — image 1

DIN Rail Mount for Shelly 2.5 and RGBW2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are DIN Rail Mounts for a Shelly 2.5 and an RGBW2, which I used to mount the Shellies in my Voron 2.4

Rating
0 / 5
Likes
14
Downloads
301
Makes
0
Views
1,787
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

These parts mount the Shellies vertically on a DIN rail to save space in width on the rail. The shellies are meant to be slid in from the front and snap into place once fully inserted.

The snaplock onto the DIN rail is purposely quite tight. I lifted the latch over the rails edge with a flathead screwdriver.

I printed them in ABS with a 0.4mm nozzle with 4 perimeters and 40% infill, which are the recommended settings for structural Voron parts.

Tags