Flood light for 2835 SMD strip with side entry cable scale 1:14
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A scale flood light suitable for a 2835 SMD strip light for scale buildings.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small detailed floodlight at 1:14 scale fitted with an 2835 SMD strip. Other SMD types strips could be used. An original design on Fusion. The floodlight is contained in the mounting bracket with a 2mm screw on one side, or fixed with adhesive. There is a lens printed in translucent, clear plastic could also be cut as needed. Those shown are printed in PETG to be used outside on a live RC course, but could be any material of choice. The cable is routed from the side of the lamp via a 90 deg elbo to the attached wall of the fixture. The cable can be routed to a suitable power source.