Diffuser for 8x8cm floodlight (Parkside 20v)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Diffuser that snugly fit over a 8x8 LED floodlight making the light much more evenly distributed
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 60
- Makes
- 1
- Views
- 1,004
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Diffuser that snugly fit over a 8x8 LED floodlight making the light much more evenly distributed.
No glue required.
The walls are 1.2mm, the flat surface is 0.48mm thick, enough for 2 layers of 0.24mm
The inside dimension is a square with 79.5mm sides and a 10mm radius fillet in the corners.
Printed with transparent PETG on a textured bed-surface to maximize diffusion. Printed without any parts cooling to maximize layer adhesion.
Used mine on a Parkside 20v battery powered floodlight model.
Made in Onshape, (link to customize).
Made to use together with this design on Thingiverse.