Diffuser for 8x8cm floodlight (Parkside 20v)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Diffuser that snugly fit over a 8x8 LED floodlight making the light much more evenly distributed
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 1004
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Diffuser that snugly fit over a 8x8 LED floodlight making the light much more evenly distributed.
No glue required.
The walls are 1.2mm, the flat surface is 0.48mm thick, enough for 2 layers of 0.24mm
The inside dimension is a square with 79.5mm sides and a 10mm radius fillet in the corners.
Printed with transparent PETG on a textured bed-surface to maximize diffusion. Printed without any parts cooling to maximize layer adhesion.
Used mine on a Parkside 20v battery powered floodlight model.
Made in Onshape, (link to customize).
Made to use together with this design on Thingiverse.