Bucket Drain Ideal for Hydroponics & Aeroponics Setups
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bucket Drain Ideal for Hydroponics & Aeroponics Setups 1" male end
- Rating
- 0 / 5
- Likes
- 46
- Downloads
- 237
- Makes
- 0
- Views
- 2,737
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is a great part I designed because I couldn't find any good ones available online. I used it on my project you can take a look at here https://imgur.com/gallery/2mQM6Cb Though very useful I accidentally deleted the design from my Fusion 360 account… Forever it will remain as is. I installed this about 1.5" above the base of the bucket so I never got 100% drainage. However! if you put it at the bottom of the bucket it should be much better.
Here's the skinny:
- Print with food safe PLA or PETG @ 100% infill.
- You need to drill a hole 1.5" hole in the bucket I think… I actually forgot the exact size to be honest so I suggest you print it first to confirm the hole size.
- You need some sort of grommet on the inside to seal it. I used a rubber sheet I cut to fit.
- Place the grommet you find/make/ or print around the male screw side of the main body. Then feed that from the inside hole to the outside.
- Screw on the screw cap from the outside
- Screw in the inner drain “filter”.
- Connect a 1" water tube on the outside and screw on a stainless steel hose clamp.
Bingo bango you got yourself a bucket drain.
Follow Syk3DGrow on Instagram for updates.