1 / 8
Modular Hydroponics — image 1
1 / 8

Modular Hydroponics

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My first attempt at a modular hydroponic system

Rating
0 / 5
Likes
14
Downloads
114
Makes
0
Views
880
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is my first attempt at a modular hydroponics.

Made the sections so that you can connect them in a modular fashion. 

Printed using PETG:
- 4 top and bottom layers, 4 perimeter layers
- 25% infill

Baskets:

https://www.amazon.ca/gp/aw/d/B07W9H8ZRH?psc=1&ref=ppx_pop_mob_b_asin_title

Pump:

https://www.amazon.ca/dp/B01NBPCVW3?psc=1&ref=ppx_yo2ov_dt_b_product_details
- DONT use a high flow pump as it will likely cause sections to overflow

To connect individual parts I used plumber's tape over the outlets as well as a short section of ½ inch vinyl tubing (about 3cm). 

I ran out of 1/inch vinyl tubing so I improvised and used some old garden hose as my drainage pipes at the end (see photo)

Tinkering with this in my spare time and learning how to use Onshape.

Open to any advise / suggestions to improve.

Tags