Logitech Z906 remote control handler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handler of 42 mm wide and 17 mm thin (+/- 1 mm) remote control. Made for specifical RC of Z906 surround sound system. :)
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 1
- Views
- 152
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This RC handler came very handy to.. you know.. handle the RC. Not a lot of things to say about it, but some infos though :
__________________
Technical info :
PLA + / PLA is fine
0.3 mm layer height is ok
5 walls
__________________
Other info :
It's really quite robust and can get pawed by a cat with no trouble at all. and handle the thing. The CSK version is slighlty tougher, but it's equivalent. The unholed version is for double-sided tape mounting :)
You can print it with PLA + for more resistance, I did it, but PLA should be ok.
__________________
Modification on 15 th October 2025 : more robust, could break if printed in PLA.
Have a good printing :)