Logitech Z906 remote control handler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handler of 42 mm wide and 17 mm thin (+/- 1 mm) remote control. Made for specifical RC of Z906 surround sound system. :)
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 152
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This RC handler came very handy to.. you know.. handle the RC. Not a lot of things to say about it, but some infos though :
__________________
Technical info :
PLA + / PLA is fine
0.3 mm layer height is ok
5 walls
__________________
Other info :
It's really quite robust and can get pawed by a cat with no trouble at all. and handle the thing. The CSK version is slighlty tougher, but it's equivalent. The unholed version is for double-sided tape mounting :)
You can print it with PLA + for more resistance, I did it, but PLA should be ok.
__________________
Modification on 15 th October 2025 : more robust, could break if printed in PLA.
Have a good printing :)