Liczymy pasujące modele…
Design Starting from the two following models: https://www.printables.com/model/122734-systainer-150mm-sander-holder https://www.printables.com/model/135647-mirka-deros-wallmount-double I designed in Fusion 360 a new handler compatible…
Hi For the Bathtub Toys contest, nobody created Chandler Bings Boat? Really… Therefore i created this very bad model of the mentioned boat for to Matthew Perry's bath. Trust me, its bad, its ugly, it probably does'nt float, don't print it…
Voron 2.4r2/Trident Sturdy handler remix with voron logo on front and back.
Hole receives 7.5mm x 53mm drain filter knob Print in PETG with 30% infill and 3 wall perimeter min, no support needed
The Air Handler System - Expansion Chamber - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these…
The Air Handler System - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have become the much…
The Air Handler System - Fans and Grills - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have…
The Air Handler System - Tower - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have become…
Print as strong as you know how. 100% infill forsure. If you dont mind supports, lay it down so it prints sideways.
The parts should be printed in a material like PETG, ABS or ASA. Do not use PLA, as it is prone to cracking and warps over time if under pressure!
I made this short handler for the Qbrick bucket for my Qbrick Toolbox 2.0 mounted on one of compartment.
My toodler broke the orginal one two times… this time I replace the broken side with a 3d printet one. I design the points where it was destroyed a littel bit stronger. have fun
Compatible with 42107 Mounting plate for CAT and JLG telehandler 1-D03 Requires support from build plate. I was able to bridge everything else. Category: Toy & Game Accessories
Little Green Army Woman : Military Dog Handler. Add to your Set!!
Friends - Chandler Bing - 1994-2004
This is a handler I designed and printed in order to replace the broken ones from an old speaker cabinet. You can see the dimensions in one of the pictures. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
The Air Handler System - Muffler - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have become…
Door handler with lock for 2020 profile. It is suitable with acrylic 2mm or 4mm.
Hardware require: 2x M5x10 cap screw 2x t-slot nut
there are 2 options and 2 pdf files for the build if you want to choose wich one you like you will have to split model
This is a cupboard handler with a center distance of 96mm Poignée de placard avec entraxe 96mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 40% Category: Replacement Parts
Live & Love – The Man Handler Cover Girl Straight from the pages of questionable pre-war literature comes the Man Handler cover girl—now immortalized in PLA filament. She captures vintage bravado, exaggerated confidence, and just enough…
originally made this on a polyjet machine and made the grip out of a softer material. included a hollow version of the print that could be used to store small things.
Handlers for the Creality Space Pi X4 to match the color of your printer, designed in the style of the Prusa Core One (the squared version). There is also a simpler rounded version. It fits very tightly so you might want to instead scale…
M5 5 bolt handler to easy use. I've designed this piece to use the m5 bolt on a sight mount for my m14 airsoft rifle
You will find 2 kinds of components: bodies and diffusers . Bodies One wave is made of 5 body parts: You can create different types of waves, adapting to your wishes. For example, part 3 can be removed, it will change the kind of waves as…
Use with https://www.printables.com/model/923910-sewing-thread-and-bobbin-roll-holder-rack-remix-of
Sculpt of the HAL 826 headpiece from Armored Core 6. Comes pre-supported for resin printing but completely FDM printable. Photography and supports by the amazing Charro Zuck. Make sure to check out my new patreon, it's completely free for…
no supports needed 80% infill or more
Maturity: Good 2 prototypes. In use since 2024/01. Model design from scratch. Taken the Prusa design of a small bit handler. Found it nice long time ago. I made many configuration to accept many bit sizes. You need: Drill bit P-drill…
Hollyland Lark M2 Reporter-Style Microphone Handle A simple but effective handle adapter that transforms your Hollyland Lark M2 wireless mic into a classic reporter-style microphone. Just slot the Lark M2 transmitter into the top cavity,…
Screw compatible with the loader screw in the 42106 pack. It has one flat side that does not affect operation and allows for printing flat in a stronger orientation. Supports are still required for the parts of the shaft that are not…
Highly detailed 3D miniature of a tactical K9 gnome handler with a "DOG HANDLER" chest patch, holding his service German Shepherd on a leash and pointing a command. The ultimate guard team for your garden, porch, office, or garage.
This remix was based on the design of Waikikiprod He made an excelet work. So I used this incredible Toad and adapt to my gardens tap. This is a very simple, economic, and common, pastic tap. I've designer the inset of the tap in Fusion…
Handler for alluminium profile 5 - Modul 20mm Držadlo na hliníkový profil Item 5 - modulární průřez 20mm Zajištění zápustnýmy šrouby M5-10 Délka madla 150mm
This hook is screwed under the desk at foot level and allows your bag or backpack to be raised. I use it for my laptop bag, so it easily supports at least 5Kg (11lbs). The use of supports is not mandatory, but I've included them in the…
🚿 Bathroom Organizer for Big Family 📦 Features & Capacity Toothpaste storage : 2 slots (holds up to 4 tubes) Toothbrush slots : 1 slot Tongue scrapers : 1 slot Electric toothbrush : 1 slot (Oral-B in my case) Brush head handlers : 2…
This is compact handle for a bit. I'm using it to adjust settings on my motorcycle's front forks. At the same time it should be pretty safe in case of a crash. You may need to adjust dimensions because of a different printer tolerances.…
PLA, min 50% infill, 0.4 nozzle, 0.2 res., tree support.
150mm LONG HEX BIT HANDLER works with 6mm and 1/4in bits IT'S MAGICAL
Very easy phone handler to print. Can be used whatever the phone. and also be used to handle your books or comics ;-) Print with Mini+ and Prusament Galaxy Black. Two designs: Phone Handler : for standard phones Phone Handler Large : for…
Highly detailed 3D miniature of a kneeling tactical K9 gnome with a "DOG HANDLER" chest patch, holding his service German Shepherd on a leash and resting an arm on his companion. The ultimate loyal guard team for your garden, porch,…
I needed some way to hold my guitar's neck off the ground while I'm working on it, and the Axe handler by Re-axe seemed like the perfect solution. And since it's not available in my country, I decided to make my own. The model consists of…
I use the jig to align the small holes on the bottom of the model for wood screws.
The handle broke off my mother's fridge, no wonder, I think it's designed to do that. I hope this sturdy construction will be more durable. I wrote a personal note to her on the flat surface. Fits well with the geometry of the door. Print…
Remixed from: https://www.printables.com/model/254233-modular-storage-cubes
This is a newer model of the magazine handler for the aug series. I have printed in PETG and it is with 6 layers on the vertical walls and 4 layers in the bottom.
This RC handler came very handy to.. you know.. handle the RC. Not a lot of things to say about it, but some infos though : __________________ Technical info : PLA + / PLA is fine 0.3 mm layer height is ok 5 walls __________________ Other…
Air Handler - WH40k - made out of sour cream container (pictured in blue). Either Small (8oz - 250ml) or Medium (16oz - 500ml) - WH40k Dress it up with additional greebles. Other DIY pieces and greebles can be found here: Do-It-Yourself…
This simple device allows you to operate door handles without touching them. It is a really simple and fast print. All you need is some string (like twine), and PLA. Let's keep our hands clean!
nozzle organizer adapter for a small ring box (42*42mm)
I have been making a Lego Telehandler for my Lego layout in my basement and I needed a 3 section boom that was minifigure scale and also some attachments. I then decided to add hydraulic cylinder housings that you push an axle into and…
A popular 2023 gift, featuring a miniature Chandler Bing from Friends, his duck, boat, and a bucket of water, a card, often gets scattered. To solve this, I created an organizer to keep them all together. If you don't need the engraving,…
This is a magazine handler for the AUG series, a new screw are needed to keep the inner parts of the magazine in place. I would advice you, to print it with 6 layers on the vertical walls.
Design Concept This Cup Handler is designed to provide a comfortable grip for paper cups, making it easier to hold hot beverages without burning your fingers. Purpose The primary purpose of this Cup Handler is to enhance the experience of…
COVID 19 No Touch Door Handler Open doors without touching the handle Clean regularly 3D prints can contain microscopic holes that may trap germs and viruses COVID 19 No Touch Door Handler Video on YouTube:- https://youtu.be/F0cAq32jDOk…
Now you have the power to take selfies and look at the world around you without having to turn you wrist
Veyr Drone Handler is a battlefield coordination specialist of the Veyr Compact , responsible for guiding support drones, relaying tactical data, and extending squad awareness across the fractured war zones of the frontier. Equipped with…
ВНИМАНИЕ МОДЕЛЬКА МОЖЕТ БЫТЬ КРИВАЯ, СМОТРИТЕ САМИ, ЧТОБЫ ВСЕ СХОДИЛОСЬ КАК НАДО И ДОПИЛИВАЙТЕ. Стол для красок акриловых Brauberg на 25 мл и с колпачком 11,5мм Настройки заполнения (на фото): – Стенки 3, верх и низ - 0 – Заполняем на…
These wheels are designed for LESU Q-9000 series axles, (9005 mid-front axle shown) and LESU 405/70-20 dumper/loader wheels as found on the MCL8, AT1050 and 6MDX models. These axles have large knuckles so clearance is maximised. They are…
Grippy handler to low temp. kitchen artifacts or other tools (6mm hole). As I used in a waffle maker I annealed the PLA. I used several times and the handles are still alive.
I use it for my WISECOCO LCD board 320x100x10mm. You might find this useful too. Check the dimensions in the slicer before printing!
Designed for use with original washer. Do not forget to extract the washer from broken original handle.
A highly detailed 3D printable figurine featuring a tactical garden gnome acting as a K9 handler alongside his service dog. This model blends classic gnome charm with modern military gear, featuring full tactical armor, a "DOG HANDLER"…
What is this? MagniPen is a compact, pen-shaped tool designed to help you pick up, move, and place small metal objects like precision screws with ease. Using a simple spring-loaded mechanism and a strong neodymium magnet, it provides a…
Since I moved to a japanese-styled toilet, I needed a towel to be reached out easily.. So here it is. With this combo, paper toilet is -has been-. Theoretically, you could add another rod (or 2 ?) to make it longer and handle larger…
This was designed for an ECG cart, this handlebar and supports have two funtion firts to move the cart arround and the second is to hold the arm where the ECG cable hang. It was printed in PETG nova from GRILON3. The handle itself was…
handler maniglia cnc okuma petg red azurefilm use bar d.12mm to complete
Tested design, all tight and secure. Printed with PETG, 100% infill, no support required.
Shower handler with 27mm diameter and it has hols for screws. The distance between the holes is 20mm
needs support recommended three auto I've printed it with .2 layer height you can how you want print in pla, or petg i did with petg. Use decent infil i used 65 percent
Designed for use with a 2-wire round telephone cable. R13-507: 16mm diameter button DS228/DS428: 12mm diameter
simple bottle wedge (ie : for fridge use) adjustable from ~40mm diameter to ~100mm used to avoid bottle rolling
This cable holder is meant to be clipped on the edge of a table, and you can insert up to 2 laptop/phone cables so they do not fall down when not in use.
A 3D-printed headphone handler is a compact, custom-designed stand that organizes and stores headphones, preventing tangling and ensuring easy access, saving desk space and adding a stylish touch.
Happy Halloween Everybody !!!!! New model for Halloween for everyone !!!!! Enjoy :) A cup of hot coffee or other hot
Fits for a pipe with inner diameter of 26mm and outer 34mm and wall thickness of 4mm.
Quantity Designation 1 Printed handle body, PA12-CF12 1 Printed cylindrical grip, PA12-CF12 1 M5 × 40 DIN 912 socket head cap screw 1 M5 × 30 DIN 912 socket head cap screw 2 M5 DIN 557 square nut Printing The file Juwel Aeroplus…
When I started this project, I could not find any of the parts I needed for the carriage tilt shaft in my collection. My solution? Bambulab H2C!
Free N scale 1:160 version of a reach stacker container handler with a telescopic boom and a 40 ft spreader, built for scale modellers, model railway and port diorama builders. WHAT IS IN THE DOWNLOAD STL files for the N 1:160 scale,…
Free N scale 1:160 version of an empty container handler with a tall mast and a sliding carriage, built for scale modellers, model railway and port diorama builders. WHAT IS IN THE DOWNLOAD STL files for the N 1:160 scale, ready to slice.…
Assembly Insert the fork tools handler into the hole of the bike fork. Tighten the knob, and you're good to go! Note: Assembly requires inserting the nut into the wedge slot and tightening with a 4mm hexagonal screw (don’t forget to…
(Edit: the latest version has a smaller viewport for the LED so the rest of the controller isn't visible. I didn't update the photos, just the model) A simple box to attach a Serin Labs HVAC controller to the outside of a Mitsubishi air…
The coil sits on top of the furnace and can be glued into place. Optional intake and flue pipes can also be printed to add some details. 🚨 WANT TO SELL MY 3D PRINTS? Join my $2/month Buy me a coffee membership and start making money with…
Handlers for the Creality Space Pi X4 to match the color of your printer, designed in the style of the Prusa Core One (the squared version). There is also a simpler rounded version. It fits very tightly so you might want to instead scale…
These wheels are designed for LESU Q-9000 series axles, (9005 mid-front axle shown) and LESU 405/70-20 dumper/loader wheels as found on the MCL8, AT1050 and 6MDX models. These axles have large knuckles so clearance is maximised. They are…
Designed for use with original washer. Do not forget to extract the washer from broken original handle.
Sculpt of the HAL 826 headpiece from Armored Core 6. Comes pre-supported for resin printing but completely FDM printable. Photography and supports by the amazing Charro Zuck. Make sure to check out my new patreon, it's completely free for…
The parts should be printed in a material like PETG, ABS or ASA. Do not use PLA, as it is prone to cracking and warps over time if under pressure!
This cable holder is meant to be clipped on the edge of a table, and you can insert up to 2 laptop/phone cables so they do not fall down when not in use.
