Compact bit handler (with Fusion360 sources)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is compact handle for a bit. I'm using it to adjust settings on my motorcycle's front forks.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 464
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is compact handle for a bit. I'm using it to adjust settings on my motorcycle's front forks. At the same time it should be pretty safe in case of a crash.
You may need to adjust dimensions because of a different printer tolerances. In addition you will need to adjust shape for different bit (currently 3mm Allen key). I assume that some universal design should be possible, however I didn't expected that this would be useful for someone else than me, so I didn't design it in such way.
You can find a Fusion360 source here: http://a360.co/2YUpyTH