Replacement handle for Gardena Classic wall-mounted hose reel 60
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement handle for Gardena Wall Hose Reel 60, printed in PETG, reinforced with internal M3 rod for extra durability.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 29
- Makes
- 0
- Views
- 421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original handle of our Gardena Classic Wall Hose Reel 60 broke after years of use. To keep the reel functional, I designed and printed a replacement handle in PETG.
Like the original, the new handle is simply press-fitted into the reel – no screws or glue required. To improve the durability of the printed part, I added an internal slot that can be reinforced with an M3 threaded rod, a threaded insert, and secured with a washer and nut from the inside.
The part was printed lying flat so that the layer lines run horizontally, making the handle stronger in the direction of the applied force.
Design features:
- Compatible with Gardena Classic Wall Hose Reel 60
- Optional internal reinforcement with M3 threaded rod, insert, nut, and washer
There are two Versions providet, one with a 100mm handle (in use on our reel) and one with a 50mm handle.
Mechanical reinforcement requires a m3 threaded insert, which is melted into the handle. a m3 threaded rod can then be screwed in from the reel end of the handle and secured with a nut and washer.
For the 100mm Handle, use a 100mm threadet rod and for the 50mm use a 50mm threadet rod.