1 / 5
Deburring Tool Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Because i bought a set of some different blades but just one handle, i made my own handles.
- Chip
- The 2 halfs are mirrored. Print both without support.
Additional Parts
- A deburring tool blade (e.g. BS1010, BS1018, BS1012, BK3010, …)
- 2 * zip ties (cable ties) width ~2.5mm (head width max. 5mm)
Assemble
- Use the chip to join both handle parts aligned.
- Insert a blade.
- Wrap the ties around. The blade should rotate easy. If there is to much friction, clean the half pipes from print-leavings and don't pull the front tie to tight.
- Cut the zip tie (e.g. with a nail clipper)