Counting matching models…
This is a modified version of Lndnny's Deburring Tool Case 150mm (AFA Tooling) - Rugged Box Style . A fantastic case for the hexagon handle. This lower insert is modified to accommodate the Round Aluminum Knurled handle version. I haven't…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant
I kept with printing this in pla and it works! material: PLA perimeters: 4 (strengthens it) infill:5% (keeps it light) support material: on build plate
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for one variant
This is a remix of Chewey 's deburring tool case and Whity 's parametric rugged box. It has an insert construction in the style of PjotrStrog 's Multipart Pinecil case. Like the original, this case fits a 150mm length tool from tip of…
Building on top of the great Gridfinity block template by Filip Kolínský , I designed a tray for the AFA deburring tool inspired by similar trays from Onelostcause and Yoni . Uploading the Fusion 360 model file in case you want to make…
Hold your AFA deburring tool on your honeycomb storage wall…and do it in style! The space for spare cutters gives it a very Game of Thrones feel to it. Print Settings: Layer Height: 0.28mm (or less) Filament: PLA Infill: 15% This is part…
Notes To use, insert a 0.125" shank deburring blade into the end of the handle until the groove in the blade lines up with the hole in the side of the handle. Press the clip into the hole until it snaps into place around the blade.…
My Tool was only some mm longer. Thanks to the supported f2d files i've modified them so you can set some parameters: (len) Length of the box (ToolEndRadius) The radius of the tool end (HolderDiameter) Diameter of the tool holder…
This is a remix of a remix of the excellent deburring tool case originally created by morleykert . This case fits a 150mm length tool from tip of blade to end of handle. Handle width is 15mm across (widest) edge of the hex handle. It fits…
I modified the case to fit the following tool : https://www.amazon.com/gp/product/B01L2XR4P2/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=1 I also increased the size of the magnet hole very slightly (.015mm) for a better fit with my…
Small Ergonomic Handle for Deburring Tool - Deburrer Tool - Mini sbavatore NEW VERSION This new version is much sturdier than our old one Optimized profile for better resistance and ease of printing Optimized filament usage Recommended…
Deburring Tool Case I designed this tool case for a deburring tool and its replacement heads that came in a cardboard box. This tool case has a print in place hinge. Magnets hold the case shut while providing a satisfying snap as it is…
The bottom recess will fit a single 8x3mm magnet. I'd recommend printing with PETG if possible (less brittle). The original model was designed for assembly as opposed to print-in-place. Printing the parts separately will likely yield…
Created a variation of the AFA Deburring tool holder to work with Multiboard and utilize the snap connector. There are some push-fit options out but I like the direct application and single print of the snap connector option for things I…
-Added a debossed (Deburring tool) name for easy identification. -Extruded the retaining pins into solid pieces for A better hold. -Enlarged the locking pin support for strength. side note- might come back through and drop the retaining…
Fits this tool: https://a.co/d/cv72Ngo Removed the floating m3 holes so the magnet holes don't get all stringy if you print without supports, which I do. The design is based off of Filip Kolínský's Gridfintiy template, which is easier to…
Gridfinity AFA Deburring Tool
AFA Tooling Deburring Tool from Amazon Remix Notes: -Blade hole diameter increased slightly to 3.5mm. -Removed extra patterned blade holes which created a gouge inside the larger hole barrel for deburring tool.
Remix of a Gridfinity holder for an AFA Tooling Deburring Tool ( Amazon link ) Replaced the hole to fit the hex handle model, and resized the blade holes to fit the spare 1010 blade stems.
Custom holder for the AFA Deburring tool and extra blades.
Here is a lighter version of my AFA deburring tool holder that holds 8 additional blades. This one uses ⅓ the filament and prints in under half the time. The AFA tool sits 40mm into the holder and has a diameter of 18.5mm if you have…
Wasn't in love with any of the current models so I made my own with more elegant (IMO, lol) storage for spare blades
This remix was created to accept the AFA Deburring Tool and the extra bits I purchased from Amazon. https://www.amazon.com/dp/B01L2XR4P2?psc=1&ref=ppx_yo2ov_dt_b_product_details The main difference was the hole created to accept the tool…
Gridfinity deburring tool holder. Designed for a 14.5cm handle length, see attached picture. Spare replacements blades can be stored horizontally and vertically. There are two variances of the holder: One variance that provides storage…
Deburring Tool Handle "Mini" Version Upgrade your deburring workflow with our compact, ergonomic handle designed specifically for standard deburring tools (deburrers). The “Mini” Version offers a comfortable, lightweight grip that reduces…
This holder/hanger is specifically made for the AFA Deburring Tool. See my other Wall Control designs: https://www.printables.com/model/452774-wall-control-knipex-cobra-pliers-87-01-150…
It is made for pegboards with 15 mm hole pitch. It should fit the pictured common deburring tool and one spare blade.
Remix of: https://www.printables.com/model/501528-honeycomb-storage-wall-afa-deburring-tool-holder-l I wanted a simple holder for my AFA deburring tool. I made two versions: One with 1 insert and one with 2 inserts so you can choose how…
Remix of this model , allowing for the tool to fit inside a 1x4 Gridfinity module. Since other modules can't be stacked on top of this one, I've used the same flat top design as these gridfinity modules , as well as matching the height so…
Holder for AFA Tooling deburring tool
This holds my AFA TOOLING deburring tool in the Modular Tool Rail System . I didn't think the deburring tool holder from it would fit mine well and wanted a special place for it rather than haphazardly tossed in the pencil cup. I didn't…
This is another remix of https://www.printables.com/@FixThisBuildThat original tool holder.
This is my first 3D modeling project. I recently purchased this AFA kit( https://www.amazon.com/dp/B08SLBT6SJ ) and needed to find a home for it. There are a few Gridfinity bins for AFA tools but none specifically for this kit that…
The hexagonal plug at the back means it takes up less space on the wall. Yeah a tiny amount :-) but every bit helps for my limited space. *Important Note:* Theres potentially a lot of retraction on the small circles so if you have your…
A gridfinity holder for a generic hexagonal deburring tool that's 4x1x4 units and stackable. The deburring tool slot can be up to 145mm long by 15mm wide. This variant fits better in my setup. The gridfinity template this was made with…
An angled deburring tool holder, optimized for AFA brand wide body deburring tool 21 blades kit. I have a limited height clearance drawer so I made this to fit in it. The holder has a slot to store the 2 small boxes of blades in it…
I love this AFA Deburring tool, and there are a lot of great Gridfinity models here on Printables, but none of them really fit all of my needs, so I made one that did. Low Profile to fit inside the shorter Ikea Alex drawers Easy access…
I love DieselDan_1254237's AFA holder, and it does fit the tool perfectly. I wanted just a bit more wiggle room and slightly increased the size of the hexagon that makes up the space for the AFA too.
Just a simple push fit multiboard holder for the deburring tool made by AFA Tooling. Prints supportless.
An updated version of Chris3DPrints' Deburring Tool Holder for Multiboard, where I changed the hole sizes to fit my deburring tool, then I added a pattern around the circumference of the body and added a fillet. I also made - uploaded - a…
I made this gridfinity holder for a performax Deburring tool I printed it in MH build white PLA (not sponsored) Check out the timelapse I made here Hope you enjoy it! Thanks, Design lab 3d
Just added the Parkside Logo for multicolor
A 2x1 organizer tool bin compatible with the amazing (although unfinished...) Gridfinity Refined system by @grizzie17. Features: One slot for a standard X-Acto knife in a stable fashion, fully protecting the blade and not making the bin…
Parkside deburring tool case. It can hold up to 11 blades, one of which is installed in the tool itself, and the lid is held in place by friction.
Simple to print cap (Diameter M20x2) for a Deburring tool. Type: Vargus Shaviv
Gridfinity bin holder for AFA Tooling Debarring Tool. For use with hexagonal handled deburring tool.
A wall bracket for EO 2101 Deburring tool kit.
hi, i designed this container for deburring tool that i bought on amazon.
To attach a deburring tool to the honeycomb wall
A carrying/storage case for deburring tool. printed in bright red to make it easy to find. Have to use razor knife to trim connecting pins and back side of pin opening slot. Use pliers to apple pressure evenly and slowly to get it to…
We worked the octagonal pattern for a few weeks and this seems to give the best balance between precision and grip. The tolerances on the insert for the blade id set for PLA, scale as needed. It should click in when you install the blade.…
Gridfinity bin to hold the Maker Supply Deburring tool (professional trimming tool kit) . Maker's Supply Professional Trimming Tool Kit | Bambu Lab UK Store
Supporto per parete attrezzata HSW Honeycomb Storage Wall per Chamfer/Deburring Tool per la ricarica delle munizioni. lo strumento nella foto è di produzione RCBS. Il supporto si aggancia alla parete con l'aggiunta di un inserto standard…
I wanted my caddy for a deburring tool to be stackable, and make it easy to grab the tool out of the bin. None of the existing holders fit the bill, so I made my own! This one is good enough for me, but on revision I would: Increase the…
A deburring tool holder for the Honeycomb Storage System. The difference with other versions is that this doesn't need supports to print perfectly. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Category: Tool Holders…
Same tool holder as the original, just with a flat 3 millimeter depression to put 3M dual Lock Velcro on the back.
Inspired by the INGCO 32-piece precision screwdriver set case . I designed it in Fusion 360 with help from Claude Code. This is iteration 59. Here's the first one :D And now look at the 59th iteration: Even with AI, modelling took longer…
Cap for one of Amazons most sold deburring tools: the full metal version from Vastools. Protect yourself and other items from damage by the sharp knive of the deburring tool Very simple model, but with a very nice hold on the tool.
I wanted my caddy for a deburring tool to be stackable, and make it easy to grab the tool out of the bin. None of the existing holders fit the bill, so I made my own! This one is good enough for me, but on revision I would: Increase the…
Supporto per parete attrezzata HSW Honeycomb Storage Wall per Chamfer/Deburring Tool per la ricarica delle munizioni. lo strumento nella foto è di produzione RCBS. Il supporto si aggancia alla parete con l'aggiunta di un inserto standard…
Notes To use, insert a 0.125" shank deburring blade into the end of the handle until the groove in the blade lines up with the hole in the side of the handle. Press the clip into the hole until it snaps into place around the blade.…
Added deburring tool slot, blade holder, and a small tray for little bits and bobs. Excellent model. .2 Layer height, hybrid tree support
Shortened handle to let it fit associated storage box. Also adjusted the diameter so the metal tool would go into handle. Did a double adjustment of the ring so it would more easily screw onto handle Print with PETG on side with 6-10 mm…
A carrying/storage case for deburring tool. printed in bright red to make it easy to find. Have to use razor knife to trim connecting pins and back side of pin opening slot. Use pliers to apple pressure evenly and slowly to get it to…
Holder for the Ruko Unigrat deburring tool. Based on a holder that I found which fits the Ikea Skadis, now fits the Honeycomb Storage Wall. Print with supports for the holder. Unfortunately I had to make it this way since the Ruko…
Simple holder to store the NOGA deburring tool directly on the Elegoo Centauri Carbon using an existing case screw.
A quick remix, adding 10 mm to the handle length. Also centerd the tool holder to fit better.
Parkside deburring tool case. It can hold up to 11 blades, one of which is installed in the tool itself, and the lid is held in place by friction.
Simple storage box for a deburring tool and 9 inserts with magnets to hold covers together (4 mm r x 2.5 mm h magnets to hold the parts). For better results: - Variable layer height: Quality / Speed = 0.00, Smooth = 10
Gridfinity bin holder for AFA Tooling Debarring Tool. For use with hexagonal handled deburring tool.
Gridfinity bin to hold the Maker Supply Deburring tool (professional trimming tool kit) . Maker's Supply Professional Trimming Tool Kit | Bambu Lab UK Store
Original instructions kept the same: Description Based on @Whity's design , I've designed an insert to hold steady and secure the tool itself and the spare holder as well. Options The .step file included multiple options to print.: You…
A deburring tool holder for the Honeycomb Storage System. The difference with other versions is that this doesn't need supports to print perfectly. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Category: Tool Holders…
Remix of the gridfinity deburring tool bin by Prints and Automation.
This is a remix of Lndnny's deburring tool case, edited to fit a Libration extended handle deburring tool (150 mm x 17 mm) and any other compatible models. Please check the dimensions of your tool before printing! Highly recommended to…
I cooked this Gridfinity holder up for my own workbench organization, even though I’m not great with Fusion 360! It holds my Fowler 6" AutoCal digital caliper and AFA Tooling BS1010 deburring tool neatly stored and ready to grab whenever…
A simple holder for 3.2mm deburring blades. The handle is one piece. The tip is split by a small slot, so the blade can be pushed in and will snap in place. The ring keeps the two halves together. Update dec 25: Added new model files for…
It is made for pegboards with 15 mm hole pitch. It should fit the pictured common deburring tool and one spare blade.
Pegboard hanger to hold a deburring tool. Fits standard 1" spaced pegboard
Because i bought a set of some different blades but just one handle, i made my own handles. Print Chip The 2 halfs are mirrored. Print both without support. Additional Parts A deburring tool blade (e.g. BS1010, BS1018, BS1012, BK3010, …)…
Mount for a generic deburring tool for IKEA Skådis pegboards. It holds the tool plus up to 12 replacement blads. It can be printed upside down without using any supports at all. I printed it with 0.2 mm layer height, 15% gyroid infill and…
There are some similar models to this, but I couldn't find one that could fit the holder and also the blades in horizontal position without wasting too much space (this one only requires a single additional square). The blades could be…
Remixed Deburringtool Holder on Multiboard from @Chris3DPrints for slimmer 12&14mm Deburrer I have attached the STL and STEP files incase you want to modify it.
Credit to @darious_461845 and @threatdisplay
Stand for deburring tool you can find on AliExpress with spare knives included for around 3-5$. This tool is great for removing sharp edges of your prints, especially after the brim has been removed. I hate those side mounted stands…
A practical holder for the deburring tool from "Meistergriff". Most deburring tools from other manufacturers will likely fit as well, but they have not been tested. Enjoy!
Cap for one of Amazons most sold deburring tools: the full metal version from Vastools. Protect yourself and other items from damage by the sharp knive of the deburring tool Very simple model, but with a very nice hold on the tool.
I look for efficient designs and, while here are many deburring tool holders already available, none met my criteria. I wanted blade storage, but towards the wall so I'd be less likely to accidently grab a blade while retrieving the tool.…
Designed a mount to fit my Performax deburring tool that is compatible with the Honeycomb Storage Wall system. It attaches to a single plug with an M3x10 bolt and nut. May need to scale up or down to fit other brands. Link to the storage…
This is a model for a generic Deburring Tool holder for the Honeycomb Storage Wall System. It also holds the spare blades.
Here is a simple holder for both items… the arms are designed to be flexivble so you can push the solder scroll trough the slot
Remix of the tool created by NoobAmStewer. Modified the handle with hex shape to prevent the tool from rolling around. Created new blade holding blocks that fit much better. It prints correctly in my Elegoo Neptune 4 Plus. Note: The cap…
I have a deburring and chamfer tool from RIDGID SCANDINAVIA A/S (catalog number 34965R). I made a PETG holder that allows me to mount it and use it with a common drill. It is mounted on a M8 screw.
4 by 2 Gridfinity box for CNC Kitchen and AFA deburring tools. Also includes 14 holes for extra blades.
Remixed your nice model, to make the Tool Version of CGBoom fit in.
The Insert - Top was remixed because my 3D printer is not very precise and the clip hole is 3.4mm big, so I added a test print for you to test the clip. if it's too loose this model is not for you.
This is holder for Parkside deburring tool with blades and scalpel.
Holder for cheap-o deburring tool from Amazon Sized for a slight interference fit, may need to thicken a wall depending on actual tool size. Mine is 12.52mm across the flats.…
