Honeycomb Storage Wall AFA Deburring Tool Holder Light Version HSW
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lighter version of my AFA deburring tool holder
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 139
- Makes
- 1
- Views
- 914
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Here is a lighter version of my AFA deburring tool holder that holds 8 additional blades. This one uses ⅓ the filament and prints in under half the time. The AFA tool sits 40mm into the holder and has a diameter of 18.5mm if you have other tools you would like to fit. The holder uses 2 vertical slim hex mounts to mount solidly against the wall when loaded and doesn't sway with tool removal. Print 2 of the hollow inserts and supports enabled. I printed on a Bambu P1P with silk PLA and the following settings:
0.4 nozzle
0.2mm layers
3 wall loops, top layers, and bottom layers
25% gyroid infill
standard speed
standard supports (for the 2 hex attachment points)
With these settings, it takes:
31.4g filament for the main body
1h17m print time