1 / 5
pulling rope handle / Zugseilbommel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
adds a nice thing to the end of a rope to pull on
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 37
- Makes
- 0
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
If ever someone asks you to get rid of those loose ends, this is what you'll be looking for.
Printed with PLA:
- 2 perimeters
- 15% infill
- 0.4mm nozzle
- 0.2mm layer height (use .10-.15mm for threads with V2)
Increase infill percentage if you want more weight or add small stones to V2.
versions:
- no threads, 3 parts, bottom snaps into place to close inner piece. Assemble from inside out.
- with threads, 2 parts, assemble by screwing parts together after tying a knot below the shell. use a coin or your neighbors toe nail to twist the inner part.