1 / 7
DampRid Container - Refillable with Damp Rid Crystals
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Refillable container to use with DampRid crystals.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 405
- Makes
- 4
- Views
- 1,361
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
DampRid Container. There are 3 parts: the container, the tray, and the lid. Fill the tray with the DampRid crystals. The tray then sits on a shelf within the container to keep it raised up so water can collect on the bottom. Added a little handle on the tray so its easy to lift out when you need to drain the water. Easy to print and requires no supports.
Print Settings
Printer: AnkerMake M5
Filament: PLA+
Infill: 10% Gyroid
Perimeters: 3
Solid Layers: 5 top, 5 bottom
Supports: No supports required
Layer Height: 0.2mm