Your last spool - Prusament Spool to Refill Adaptor (Masterspool)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Whats even better than upcycling? Not creating waste in the first place.
- Rating
- 4.93 / 5
- Likes
- 697
- Downloads
- 1,544
- Makes
- 39
- Views
- 19,686
- Reviews
- 43
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Whats even better than upcycling? Not creating waste in the first place.
This turns your Prusament-Spool into a Refill-one.
If you are looking for a design that does not require glue, I recomment this one: https://www.prusaprinters.org/prints/1127
Other Refill-Spools are either too weak or take a lot of Filament to print. This model provides a sturdy refill-spool using just under 100g of Filament.
Now all that is missing is for Prusa to release their great Filament in a refill-version ;)
Compatible with Refills with inner diameter of 100mm and width 47mm (eg. Das Filament). If you need other sizes, just write me a short DM.
Print & assembly
Print "last-spool-main" once, "last-spool-secondary" twice. "label-holder" is optional
Apply a small amount of Glue to secondary elements and press fit them into the spool. Screw main-element in.
Press-fit label holder into spool - done!
Note: Don't try to pull out the zip-Ties. Just cut them really close to the spool (as shown with the red filament)
Print instructions
Quality-Setting at 0,2 mm
Material: PLA
Infill: 5%
Perimeters: 2