Your last spool - Prusament Spool to Refill Adaptor (Masterspool)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Whats even better than upcycling? Not creating waste in the first place.
- Ocena
- 4,93 / 5
- Polubienia
- 699
- Pobrania
- 1550
- Wydruki
- 39
- Wyświetlenia
- 19 741
- Oceny
- 43
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Whats even better than upcycling? Not creating waste in the first place.
This turns your Prusament-Spool into a Refill-one.
If you are looking for a design that does not require glue, I recomment this one: https://www.prusaprinters.org/prints/1127
Other Refill-Spools are either too weak or take a lot of Filament to print. This model provides a sturdy refill-spool using just under 100g of Filament.
Now all that is missing is for Prusa to release their great Filament in a refill-version ;)
Compatible with Refills with inner diameter of 100mm and width 47mm (eg. Das Filament). If you need other sizes, just write me a short DM.
Print & assembly
Print "last-spool-main" once, "last-spool-secondary" twice. "label-holder" is optional
Apply a small amount of Glue to secondary elements and press fit them into the spool. Screw main-element in.
Press-fit label holder into spool - done!
Note: Don't try to pull out the zip-Ties. Just cut them really close to the spool (as shown with the red filament)
Print instructions
Quality-Setting at 0,2 mm
Material: PLA
Infill: 5%
Perimeters: 2