1 / 1
Polymaker PolyDryer's Second Desiccant Container (Narrow Slits - 1.0mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The second desiccant container with narrower slits to prevent desiccants from dropping out
- Rating
- 4.5 / 5
- Likes
- 6
- Downloads
- 41
- Makes
- 2
- Views
- 338
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original desiccant container fits the back corner of the PolyMaker PolyDryer, but the slits / grilles were set at 2.0mm which were too big for the desiccants I have. Since the desiccants were spec to be at least 1.2mm, I've modified the container grilles / slits to be at 1.0mm.
Test printed with PETG, at 2.5mm layer height.
PolyDryer is a modular dry and store filament solution by Polymaker.