Polymaker Polydryer Wall Mount (French Cleat)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A French cleat-style wall mount for the Polymaker Polydryer.
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 252
- Makes
- 2
- Views
- 1,279
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is my third take on a hanger design for the Polymaker Polydryer. I have another design for Ikea Skadis mounting available HERE, which is the same design. The only difference is the Skadis hooks were replaced with a French cleat for a floating look. This design saves tabletop space while allowing access to the power switch in the back through a cutout. Additionally, this is mounted through a floating style french cleat with recessed holes designed for drywall screws.
The original plug for the Polydryer is too long to fit into this design. Therefore, an additional 90-degree extension cable to facilitate a proper fit can be purchased HERE. I made my design from scratch in Shapr3D. It includes storage for filament box plugs!
Please consider supporting if you enjoy this or any of my other models!