PolyMaker Polydryer Heater Mount for the Qidi Q1 Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows placement of your Polymaker PolyDryer heater on top of your Qidi Q1 Pro.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 386
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Dry boxes are great for your PLAs and ‘standard’ filaments. But as you move into your nylons, the filament needs to be actively dried during printing to maintain a proper humidity level. The Polymaker PolyDryer is warm enough to maintain a dry spool.
By mounting the dryer above the Q1 Pro, a short feed helps to maintain that dry environment.
There are 2 stl files. The standard only has walls to the top of the heater. The extended version has walls that come up 40-50mm up the side of the spool box sitting on top of the heater.
The added width may be a problem with some risers. If so, I can modify the slots at the bottom to offset the change.
Printed in Overture ASA Black, .16 lh, tree supports for the bridges over openings.