PolyMaker Polydryer Heater Mount for the Qidi Q1 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows placement of your Polymaker PolyDryer heater on top of your Qidi Q1 Pro.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Dry boxes are great for your PLAs and ‘standard’ filaments. But as you move into your nylons, the filament needs to be actively dried during printing to maintain a proper humidity level. The Polymaker PolyDryer is warm enough to maintain a dry spool.
By mounting the dryer above the Q1 Pro, a short feed helps to maintain that dry environment.
There are 2 stl files. The standard only has walls to the top of the heater. The extended version has walls that come up 40-50mm up the side of the spool box sitting on top of the heater.
The added width may be a problem with some risers. If so, I can modify the slots at the bottom to offset the change.
Printed in Overture ASA Black, .16 lh, tree supports for the bridges over openings.