Polymaker PA6GF Print Settings/Orcaslicer Profile for Bambu P1S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
See Notes before using orca profile to make sure you get the most up to date file!
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 359
- Makes
- 0
- Views
- 1,776
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
See Text file for settings, orcaslicer profile in the .zip. To add go to file-Import-Import Configs and it should add it in. It will only show under bambu p1s 0.4mm nozzle size
To avoid confusion. the filament will be added under the standard printer profile in orca. As the standard profile can't be overwritten, you will need to go under the printer settings and change the z hop type to normal. It is under the extruder tab. The only other way I could have done this was to create a new printer profile and I think that would have caused more isssues than this will.
Edit: I added the process/print settings file I use also. Also fixed a error in the first upload of the filament profile. Edit made 8-20-24, 0630 Central Time (US).
Edit 9-9-24 Uploading Updated and Improved file as '9-9-24 PA6gf Perfected orcaslicer.3mf'