Sunglasses Car Clip
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.73 – €0.89 net (excluding VAT)
For file: Original_20mm_0.3mm_PETG_MK3S_37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.81 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 37.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple clip for car visor to hold glasses
- Rating
- 4.829 / 5
- Likes
- 3,737
- Downloads
- 13,736
- Makes
- 162
- Views
- 38,450
- Reviews
- 129
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Edit 24/11/2022
I've printed the model in ASA now so it should have a better resistance to heat. However, winter as come and the temperatures are not enough to properly test it.
Do not print in PLA
Works best for thick sunglasses (6mm clearance)
I really enjoyed moacmoa design, first I printed it in PLA but it quickly deformed, and then I moved to PETG with better results. But even when printing in PETG at 100%, with time it deformed as well.
I increased the clip width to try to achieve even better results and to have a sturdier piece that doesn't deform easily.
The pieces have a gap of 6mm for the glasses, keep this in mind for glasses with slim frame arms.
↳ Heat deflection can happen with time (PETG for both colours)
↳ 20mm version (left, black, original), 25mm version (right, red)
Printing
I don't recommend printing this in PLA, please use PETG or other material with high heat deflection temperature.
For this piece, I use 100% infill in order to have minimum part deflection due to temperature.
I recommend using 3 perimeters to cut printing time.
Since the first couple of layers have a steep angle it creates a bit of an overhang, a bit of support (support on the build plate only) is advised, it will only add 1 minute to the build time and the part will come out perfect.