Counting matching models…
Hello Unfortunately a little later than expected later than never ^^. A beautiful modern glasses stand. Unfortunately, there is no longer any fits due to the dimensions. Show me your version in the comments and leave a comment.
Case for magnetic sunglasses from owndays snap series, with elastic band slot, fits over a sony xperia 10 iv wallet, Requires: 4 * m2x16 bolt 4 * m2 nuts felt/soft material to line case 150mm * 20mm elastic loop (I used 300 mm * 20mm and…
A dog with sunglasses designed by Meshy.ai with no changes made to it. it would be best printed on a resin 3d printer.
Flat mount sunglasses clip for use anywhere you need to store your glasses. I put two over head in my center mount in my jeep. Works perfect! Adhesive backed foam is required inside the clamping faces to keep glasses secured and so they…
These sun shields are thicker than the originals. I've made them that way so they'll hold their shape. I've designed a version with a 10x1 mm magnet slot—just be sure to align the poles correctly before gluing them in place. While they…
EXTRUDR Easter Bunny 2017 Separate Sunglasses + Lenses >>> Reupload of the Extrudr Easter Bunny 2017 Separate Sunglasses >>> Lenses for Sunglasses (my remix) I made suitable lenses for the Extrudr Easter Bunny 2017 with separate…
Current version is for suited for four sunglasses and can be mounted by using double-sided mounting tape. If the pins are to small, try adjusting them by a few percentagepoints to get that tight fit. Enjoy! Get creative and choose your…
I liked the original model but wanted it to hold more securely. See remix changelog for notes. Fusion 360 files included. Have fun. Licensing: Credit/attribution/link is my only requirement. Free to use, modify, or sell. Please share your…
It is very small so please use TPU/Nylon/ASA/ABS or other heat resistant filament. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other models HERE Any feedback will be…
Inspired by https://www.printables.com/model/1407760-sunglasses-holder-for-sun-visor-in-car But it's hardly a remix. I built it from scratch, added “teeth” to the design for better grip and honestly was experimenting designing with…
A holder for my sunglasses, to attach them to the fridge and or the bulletin board next to my desk. If you want, you can glue a strong magnet to the back, I added a recess indentation on the back that should fit rectangular or circle…
Video! Everything prints flat - no supports needed! SAFTEY NOTE: Wear at your own risk - the polycarb is used to block UV. Without it, polarizer-only glasses can be dangerous, as they block visible light, so your pupils dilate, but then…
This Clip-On Sunglasses Case features an integrated filament hinge, a soft felt lining, and a secure magnetic closure. The design includes precision cutouts on both sides for seamless felt and magnet integration. Assembly Instructions…
I liked this design for glasses but I wanted one for my sunglasses. So I made some new markers and changed the hinge so that I could use M3x20 screws, since I have those lying around. Print however, no supports needed. I printed all of…
I recommend printing in a high temp, like PETG, filament - although PLA would work... when printed in PLA it warped over a few weeks of use. The additional sizing of a 4mm inside to hold glasses with thinner arms, which most of mine are!…
Multiple pairs of (sun)glasses, two parts, no supports! The original length + base (my settings) prints in 1 hour and 45 min, with 45g filament, so this is a pretty quick and light print! I like the style of 'wrap around' sunglasses, and…
A practical, wall-mounted holder for your glasses. The model is optimized for easy 3D printing and requires no supports. It is designed to be mounted to a surface using double-sided adhesive tape (approx. 2 mm thickness).
Turn your Otto robot into a true nerd! 🤓 This simple and fun glasses mod gives Otto a brand-new personality. The chunky nerd-style glasses make the robot look smarter, cuter, and much more expressive. The model is designed to fit the HP…
A simple wall-mounted holder for sunglasses inspired by simui's "Solwave". Use 4 pieces of 1.75 mm filament for the assembly instead of glue.
Ioniq 5 sunglasses holder for the magnetic spot on the instrument panel. Uses four 6x2.6mm magnets (what I had on hand). Fusion360 file included for customization. Prints in one piece, front side down. Might need to tweak settings to get…
Turn a simple desk grommet into a functional piece of art. Need a place to put your sunglasses? Need a place to put your phone? This replacement grommet can handle either. No supports required. Just find a color of PLA that matches your…
There was no place for change or my sunglasses in this car so I commandeered one of the cup holder slots. I doubt this will ever be useful for another person, but if you have a Jaguar F-Type, or a cup holder that fits these dimensions,…
Remixed Sunglasses holder (for Honeycomb Storage Wall) by DusBus to have a cutout in the back to accommodate more arms
Print with the flat side down. Tree supports are recommended for the top section but not required (it will depend on your printer). Use a piece of filament as the hinge.
Hi all. I was looking for a mount for glasses, but it wasn't what I imagined. Here I saw the author's model: https://www.printables.com/model/616993-sunglasses-holder/comments This model is successful, but I didn't like the protrusions…
This 3D model is designed for the Ford FITS hook, which is included in all Maverick vehicles. It's intended to hold the sunglasses of two rear passengers, offering a convenient solution since there’s no dedicated storage for them. I…
This is a holder for up to 5 glasses/sunglasses. The 3MF design has been split into 2 pieces (using Bambu Slicer cut with 2 added snaps) so they can be printed with no supports. They printed fine, but I would change a setting when…
These are Dummy 13 sunglasses to enhance the looks of your dummy 13 action figure. They slide easily on to your dummy's head. They look like Pit Vipers, but a bit different. Print Settings: Supports: None Infill: 15% or more Material: Any…
My Gfs sunglasses broke so I looked online for this piece to print but the best one I could find wasn't curved properly and cut into her nose. So I decided to measure the broken piece and recreate it almost exactly the same as the…
This model was designed for magnetic glasses clip owners who want to use Sunglasses Car Holder. Quick tips: - NO SUPPORTS is required -After printing the model, place each magnet into the holes at the back side and push them all the way…
Hi Everybody, i am using the Multiboard in my hallway for my daily things. So i made a sunglasses holder. This version is for the Multiconnect screw-in adapters by @DavidD. A Version for Multipoint will follow.
Hello Unfortunately a little later than expected later than never ^^. A beautiful modern glasses stand. Unfortunately, there is no longer any fits due to the dimensions. Show me your version in the comments and leave a comment.
Case for magnetic sunglasses from owndays snap series, with elastic band slot, fits over a sony xperia 10 iv wallet, Requires: 4 * m2x16 bolt 4 * m2 nuts felt/soft material to line case 150mm * 20mm elastic loop (I used 300 mm * 20mm and…
Sunglasses clip for a really thick sun visor, like the ones in a Nissan LEAF, which holds two pairs of sunglasses. Note: It helps to install some thick foam tape/padding in the opening where the temple/arm pieces of the sunglasses stay.…
A dog with sunglasses designed by Meshy.ai with no changes made to it. it would be best printed on a resin 3d printer.
The zipper pull of my sunglasses broke so I decided to print one shaped like sunglasses. I used a sunglasses png to base my model on and added a loop to it to attach to the zipper. Printed in black, because my sunglasses are black too.…
This is a stack-able sunglasses holder. There is a easy print version where the base and the first extension are separated. I also added a non separated base version incase someone doesn't like the base being separated. However that…
This is a clip for lightweight sunglasses, I use this to hold a set of Ray Ban Caravan Aviators. Two smaller hooks hold each side of the sunglasses, and a connecting rod helps keep them from sliding around.
We always used to hang our sunglasses on our hadstand, but they always fell down when touched slightly. This snap-in-place hook for 15mm tubes allows you to hang your sunglasses to a 15mm tube. Fusion 360 and step files are included to…
Securely hold your sunglasses on bike rides with this handlebar mount. Prevent scratches and keep your glasses easily accessible. Features: Dual Mounting Options: Includes files for both left and right-side mounting to suit your…
If you are planning going on the hiking trip or just going to the city print this mount for your Sunglasses, glasses or protective glasses that you can attach on your backpack or molle strap so it is easy for you to reach. The model has…
I have seen some key holders online, but nothing that suits both keys and sunglasses. I designed the key attachment pieces based on some other designs online, however modified them to suit the spacing needed to also have the glasses hook…
2025 Roman Numeral MMXXV Sunglasses, Pendant, and Key chain designs. Printed @ .3 mm with 2 colors Sunglasses can be printed with 2 or 3 colors. Happy New Year!
We have a lot of sunglasses at home, which have their own cases, but they always end up lying around, so I drew a larger box that would fit more of them and then they wouldn't be lying around anywhere. Máme doma hodně slunečních brýlí,…
I wanted a nicer hard case for the G1's sunglasses clip so I made this model. Pictured is the print however I have made one modification since. It uses four 5x2mm magnets to keep the case attached. Not pictured, but I have since lined the…
My collection of my own and donated snapbacks has grown considerably and I didn't like the purchased wall mounts, so I modeled my own. I mainly wanted to print without supports (in the version with a sunglasses holder, I recommend…
I broke my sunglasses and I wanted to order a new frame, because the glasses itself had some diopter, but unfortanely mr.spex doesnt sell them anymore... So I tried my best and made a model. Its for use with the Polaroid PLD D343 807…
Flat mount sunglasses clip for use anywhere you need to store your glasses. I put two over head in my center mount in my jeep. Works perfect! Adhesive backed foam is required inside the clamping faces to keep glasses secured and so they…
Display your sunglasses without them tipping over. (New model available, works better, V2)
I needed some sunglasses shelves for my girlfriend, so I ran this up in Fusion. Holds two sunglasses securely with no worry about them falling off or getting bumped off the holder. The corners have 0.4mm anti-lift tabs modeled in. They…
This is a one-piece sunglasses holder but if you make it bigger then it is a headphone holder.
I use it to hold my sunglasses hanging on the top of my bookshelf. Can be attached with double sided tape. Very simple to print print it in vertical and does not require support
Saw an advertisement on Facebook for these sunglasses that used polarizing lenses from a camera, thought I can make that! This model uses no hardware and only requires a non-adhesive linear polarizing filter for the lenses. The hinges…
My faux leather sunglasses case ripped near the button, so I needed to reinforce it. I superglued this underneath the button and it works like a charm! As an added bonus, I can quickly see at a glance which sunglasses case is mine, since…
A stackable 4x1 gridfinity bin that holds reading glasses or sun glasses in all shapes and sizes. Uses little material and prints quickly. I recommend going with a lower layer height.
Original description from: Hopper_Dropper: Introducing the 1x1 Gridfinity sunglasses/glasses stand – a quick, low-filament print that keeps your eyewear organized and within reach. Designed to fit nearly all types of sunglasses and…
I was trying to get a sunglasses clip for a 2019 Jeep JL Wrangler without much success. The Jeep visor is a harder plastic, and the edge of it has a bevel/chamfer making all of the 3d printed sunglasses visor clips not able to stick to…
Got this file needed to thicken it up. Printed on photon. had to fuse the sides on. Print instructions Category: Fashion
These sun shields are thicker than the originals. I've made them that way so they'll hold their shape. I've designed a version with a 10x1 mm magnet slot—just be sure to align the poles correctly before gluing them in place. While they…
I wasn't satisfied with the other solutions for sunglasses storage for my IONIQ 5, so I made this variant, designed specifically around the larger measurements of my cheap sunglasses. This was designed to make it very easy to slip the…
Please print this model with Petg or PLA. I recommend to follow print parameters. Parameters: 0.4 Nozzle 0.2 Layer Height
Simple clip that attaches to your car's visor that will hold your [Sun]glasses safe and secure when not in use. Fitment has been tested on a 2019 Subaru Crosstrek. YMMV. Printed at 0.16 layer height in Polymaker Polylite ASA. UPDATE (Jun…
This model is custom-fitted to my specific sunglasses clip. The model has been made in FreeCAD and the project is available in the files, so it is possible to change it to fit other types of glasses, but I don't guarantee that is going to…
I remixed this in 2 ways: To be a bit more thick to fit normal sunglasses → Sunglasses car clip thick glasses.stl To be a bit more thick to fit normal sunglasses and the thick sunshield in a VW multivan → Sunglasses car clip thick glasses…
Edit 24/11/2022 I've printed the model in ASA now so it should have a better resistance to heat. However, winter as come and the temperatures are not enough to properly test it. Do not print in PLA Works best for thick sunglasses (6mm…
Added crude sunglasses and impressions to glue glasses to. 2 pc print - supports optional. Requires glue to assemble.
EXTRUDR Easter Bunny 2017 Separate Sunglasses + Lenses >>> Reupload of the Extrudr Easter Bunny 2017 Separate Sunglasses >>> Lenses for Sunglasses (my remix) I made suitable lenses for the Extrudr Easter Bunny 2017 with separate…
Made to fit most 5x5 wooden boxes like from Michaels or Amazon. AMS not required. Print Settings: .4 Nozzle .20 Layers 100% Infill White Filament - Layers 1-4 Pause at start of layer 5 Red Filament - Layers 5-9 Pause at start of layer 10…
THIS IS THE FIRST MARKERITO WITH MEME SUNGLASSES BY Tiktok : _$_MARKERITO_$_
temple for Prada sunglasses, don't know the exact model. Print it in petg or asa. Bend it after applying heat (boiling water or hair dryer …) according to the curve on the original temple.
3D printable subglasses. Are they perfect? NO! Lol but they work ;))) its like looking through your sliding door net, your eyes focus on the outside. This took 2 attempts to make it functional so my apologies to the first 10 people who…
These sunglasses fit to commonly available oakley frames. I'm attaching the fusion design files in case you want to remix it easily. It's print in place, the hinges work well. I printed it so the top is on the build plate, with raft and…
Hi everyone! This is a useful print for everyday use, all you do is put the hook on your car's rearview mirror and then pop your shades on it! I hope you enjoy!
Organize up to 4 sunglasses with this stylish holder. No supports. Easy assembly.
Resized for my sunglasses Added embossed brand to the lid SCVCN sunglasses from AliExpress Will probably line the box with thin foam Will need 6 x 30mm M3 bolts
It is a sunglasses Clip that It is model after the Cybertruck, with locking latch included Print In Place with no Supports Need two pieces of 10mm foam 28x28mm and 28x68mm They stay in with no glue needed Do both sides Done Cheers
🎁 Get $100(s) in Rivian Rewards points and 3 months free RAN charging by using my referral code TODD11893313 when 🛒 ordering a Rivian . UPDATES 2025-10-24 Added the -v2 version as an alternate style with rounded edges. The arms of my…
This is a slick and low-profile case for clip-on sunglasses. It's only 9mm thick! _________________________________________________________________________________________________ The dimensions of the space for the sunglasses: The…
Designed using Autodesk Fusion. I printed with Anycubic Kobra neo 2. There is a face you are able to print from at that allows for less supports needed for parts of the print that are at an angle. I used callipers to take measurements of…
This functional and minimalist dashboard sunglasses holder is designed for effortless one-handed operation. No need to aim or adjust — just push your sunglasses in from any side (temples or lenses), and they’ll be gently but securely…
Universal Car Sunglasses Holder — Soft TPU Clip with Firm PETG Base ✅ No supports needed | 🚗 Sticks firmly to dashboard | 🕶 Quick one-hand use 🔧 Description This functional and minimalist dashboard sunglasses holder is designed for…
This is a remix of the original design of Michaël Fortin (https://www.printables.com/@fortinmike) now fits 20mm strap
Make sure to add many walls/perimeters to insure no water leaks inside the float. I used Prusament PETG but this would work with PLA or other filaments. Also, print vertical and add a brim to secure the part to the printer bed. NOTICE: If…
sunglasses so that everyone thinks you are not bothered by the sun but in fact you are bothered by the heat just as much as everyone else
My Sunglasses broke in the center of the nose bridge. I scanned and created this as a splint to repair them. Printed in ASA. Front up printing orientation recommended. Supports required.
The stock button and clip for the MK7.5 GLI weakens due to normal heat temperatures and the OEM replacement part does not fix the issue. This part will allow you to replace the button and clip with more heat resistant plastics. I used…
This model remade from scratch for better printing with FDM. Removed unprintable and less than printable features.
Trainer: “Please bring plenty of sun. Thank you.” Me: opens blender, puts this model together in a few minutes and prints it Probably I should have brought more than just one. Just a few minutes into the training there was a heavy…
