1 / 6
Sunglasses
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Full rim sunglasses frame for Oakley Gascan lenses with print in place hinges. Optional built-in supports.
- Rating
- 4.833 / 5
- Likes
- 111
- Downloads
- 1,015
- Makes
- 11
- Views
- 4,957
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
— Link to my other design: Half Rim Sunglasses —
Features:
- Designed to use Oakley Gascan lenses
- Printed to lens & face curvature, no need for inexact heated frame bending
- Print in place hinges make for simple one piece print with no frame assembly required
- STL file available with and without built-in supports
- Simply twist hinges to free them up after printing
- Built-in supports leave a one layer gap (with 0.1mm layers) for easy removal
- Oakley Gascan lenses pop in easily and stay in place
Print Settings:
- Orientation: Print sunglasses upside down with the top in contact with the build plate
- Print with 100% infill (about 29g of filament total)
- 0.1mm layer height if using file with built-in supports
STL File Versions of Sunglasses Frame:
- No supports
- Built-in brow & bottom-frame supports designed for easy removal when printed with 0.1mm layer height
Lenses:
Oakley Gascan replacement lenses are available on the internet for around $10 or even less
Other Information:
- I have printed all my test frames in PLA, but a more temperature resistant material is probably a good idea if you are going to leave them in a hot car
- Hinges are reasonably robust but will not stand up to abuse
Short video on freeing hinges, support removal and lens installation:
*If you print these sunglasses please consider posting a make! Enjoy!!*