1 / 6
Sunglasses
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full rim sunglasses frame for Oakley Gascan lenses with print in place hinges. Optional built-in supports.
- Ocena
- 4,833 / 5
- Polubienia
- 111
- Pobrania
- 1015
- Wydruki
- 11
- Wyświetlenia
- 4957
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 11) (Komentarze: 27)Remiksy (0)Kolekcje (144)Powiązane
— Link to my other design: Half Rim Sunglasses —
Features:
- Designed to use Oakley Gascan lenses
- Printed to lens & face curvature, no need for inexact heated frame bending
- Print in place hinges make for simple one piece print with no frame assembly required
- STL file available with and without built-in supports
- Simply twist hinges to free them up after printing
- Built-in supports leave a one layer gap (with 0.1mm layers) for easy removal
- Oakley Gascan lenses pop in easily and stay in place
Print Settings:
- Orientation: Print sunglasses upside down with the top in contact with the build plate
- Print with 100% infill (about 29g of filament total)
- 0.1mm layer height if using file with built-in supports
STL File Versions of Sunglasses Frame:
- No supports
- Built-in brow & bottom-frame supports designed for easy removal when printed with 0.1mm layer height
Lenses:
Oakley Gascan replacement lenses are available on the internet for around $10 or even less
Other Information:
- I have printed all my test frames in PLA, but a more temperature resistant material is probably a good idea if you are going to leave them in a hot car
- Hinges are reasonably robust but will not stand up to abuse
Short video on freeing hinges, support removal and lens installation:
*If you print these sunglasses please consider posting a make! Enjoy!!*