Liczymy pasujące modele…
This is a reusable spool designed to fit eSUN 1 kg refill filament Its designed to be: Reliable and safe; wont unscrew itself by accident Easy to print Use less material than the original version made by eSUN No need for additional nuts…
This base mount allows you to use TeachingTech's ball-joint camera mount system on your Flsun v400 (and possibly SR) rail. Specifically made to be short enough to work with enclosures. Currently designed to use phnxdrgn536's hardware…
A simple sunblocker for a microscope to block light coming from the side. The pictures are version 1, I will upload new ones soon. The microscope I use is a motic SMZ-168. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports:…
To be able to use my 3D printer as a plotter cutter also, I created a simple mount for a basic cheap Chinese plotter blade. These can be bought for a few bucks and come with lots of replacement blades with different edge angles. I bought…
The cage for the hot end for the effector by @RyanMaverick_259405 is about 3mm too short for me. This leaves a gap between cage and the effector plate as well as the duct fan and the effector plate. The gap between the effector plate and…
A sunshade for generic red dots. Use some double sided tape if it has too much movement.
Hello Unfortunately a little later than expected later than never ^^. A beautiful modern glasses stand. Unfortunately, there is no longer any fits due to the dimensions. Show me your version in the comments and leave a comment.
Summary This design was inspired by the Aten Heliochronometer Sundial, model B4003, designed and built in the 1990’s by the craftsman J.D. Gard of Tucson, Arizona. It’s a beautiful instrument made out of brass and aluminum, and it claimed…
Summary With a simple modification to the analemma plate, you can convert your Earth-based heliochronometer into an accurate Martian sundial using one of these Printable models: Planetary Geared Sundial/Clock Hybrid - The Best of both…
The Galaxy Watch Ultra introduced a new style of watch straps. This model is a wall-mounted holder, designed to be the correct width to fit 1 or 2 normal sized 3M Velcro Command Strips for non-destructive mounting on a wall. You can also…
Case for magnetic sunglasses from owndays snap series, with elastic band slot, fits over a sony xperia 10 iv wallet, Requires: 4 * m2x16 bolt 4 * m2 nuts felt/soft material to line case 150mm * 20mm elastic loop (I used 300 mm * 20mm and…
This is a holder for the Fingerbot to automate powering on the BK215 battery. Print with supports (due to the screws). PLA is fine, but PETG is better. Printable: 1 x Holder 1 x Leg extension Addition needs: • 1x Fingerbot (35 mm x 35 mm)…
Needed to hold a 5kg esun spool under a shelf. Found some really nice brackets from Boneswiss that i wanted to use. To mount the 5kg spool to the brackets I printed to bearing holders, one for each side. You will need to following: 2x 608…
V2 UPDATE: Ok, so i had a brainfart while "CADing" this and made it too tight for no reason at all. Now it should fit MUCH BETTER. The clip has identical dimensions to the original and the same function. The only thing that i could not…
Modeled in Tinkercad Sliced in Prusa Slicer 0.4mm nozzle SPEED profile PETG
Ich habe den gerade neu erschienenden SUNLU-Filamentconnector gekauft und getestet. Es ist schwierig und benötigte immer mehrere Versuche, um das Filament (Ø 1,75) sauber zu verbinden, da es beim Rausnehmen aus dem Connector weich ist und…
[English] I've tried various buffers and auto rewinders for MMU2S, and I finally found something satisfactory. That name is “Stronger Compact Spool Auto-Rewinder by rans”. It is great that it rewinds moderately, even if there is a lot of…
The brand new Sunlu filament welder is a great solution for splicing all those short end-of-roll tails you have lying about. However, imho, there is one big flaw and that is how to align, weld and extract the heated filament/joint without…
Handle for The T1/Pro The uploaded orientation is intended to have a clean, visible surface, but of course, it can also be printed differently without supports. Unfortunately, my printer didn’t come with a handle, so I quickly created my…
This wall mount is designed to accommodate the Samsung S23 Ultra with a phone case, but it also fits a range of other devices, such as the Samsung S10 (as shown in the third image). The mount allows for both horizontal and vertical…
I've redesigned pfte bracket with fittings I have at home.
Box mit Deckel für den Sunlu FC01 Filament Connector. In die Box passen neben dem Connector noch zwei kleine USB-Netzteile, das USB-Kabel sowie die Teflonschläuche. Wurde mit Fusion 360 erstellt, die entsprechenden Fusion-Dateien sind…
A dog with sunglasses designed by Meshy.ai with no changes made to it. it would be best printed on a resin 3d printer.
It's a remix of two great models into one even better Print vertically and use brim for better adhesion. For a better look, draw a seam inside the model in Orca slicer. I prited mine in PLA.
This is a twist-in 3030 extrusion mount for the Thermistor found inside the Sunlu S4 Dehumidifier. The mount uses the screws that held the thermistor in place inside of the S4 unity.
upd: untested for Galaxy S25, but come on, it's the same format as Galaxy S23 Use Magsafe charger from Apple. Assemble with two M3x8 screws. I added two GOST 11371-78 washers to make the hinge more strong and prevent the screws from…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
Printed with Bambulab P1S, PLA Basic and PLA Matte filaments. Sliced with Orcaslicer, I've been testing scarf joint feature. Adjust objects and texts (parts of the objects) colors. Disable ironing if you are uncertain if you are uncertain…
As my printer is located on desk with original enclosure I designed side spool holder. Central cylinder is for spools with 55mm central hole. I used aluminium stick 8mm for cylinder, but also there is file for spool sticks, please use…
Wall mounted case for the Samsung galaxy s6 lite. The mount allows for variable viewing angles and easy removal. Required hardware: - 3 x M3 x 6 mm flat head screws (flat head - 6 x 1mm) - 3 x M3 nut - 13 x 3 x 2mm magnets (Width x…
this is the bracket I use with my flsun T1 pro to hold the spool end of a 21" long piece of ptfe tubing. the center hole needs to be threaded to match whatever QR fitting you choose. I used the SMC KQ2H04-M5A so I threaded it to 5x0.75.…
I wanted to run LED's to be able see prints easier so I made these for the strips to adhere to easier. They don't need to be super tough but they are thin so I printed them with 100% infill in PLA.
BUMS: Das ultimative Upgrade für dein DINGS (und deine Ordnung!) Du hast dir schon ein DINGS gegönnt und fragst dich, wo du die ganzen DINGS jetzt am besten aufbewahrst? 🤔 Keine Sorge, wir haben die Lösung: BUMS! 😎 Das Dings findest du…
For Samsung TV, Soundbar and Google chromecast remotes
I couldn't really find any Sunlu S1 holder for my MK4S, so I designed my own with some help from the model from: Dion Christensen The dryer sits flat, so there shouldn't be any issues with the filament rolling in the dryer. I've made 2…
Print 2 of these. Use 3 M4 heat set inserts on one and assemble with 3 M4x55-60mm screws. The v2 modifies the center hub of the spool to contain the Silica Gel holder here. https://www.printables.com/model/1125066-stronger-50mm-version
Flat mount sunglasses clip for use anywhere you need to store your glasses. I put two over head in my center mount in my jeep. Works perfect! Adhesive backed foam is required inside the clamping faces to keep glasses secured and so they…
Much effort has been put into this design so please leave a like or comment—it would mean a lot to me! And if you have any feedback, I’d love to hear it! Main Features Choose your own flag!; Completely customizable design for your…
This is a simple box for storing your sunlu filament connector in. It features 2 compartments. One for the connector and another for the power cord and ptfe sleeves. NOTE: Because I have noticed larger sliding lids tend to expand and…
This is a reusable spool designed to fit eSUN 1 kg refill filament Its designed to be: Reliable and safe; wont unscrew itself by accident Easy to print Use less material than the original version made by eSUN No need for additional nuts…
This is a remix of jerzone Bike trainer iPad mount, I modified it to be able to hold my Samsung Galaxy A23 during my Zwift session. I needed this kind of device but never found one suited for the dimensions of my bike. V2 uploaded with a…
2004 - 2012 Bentley Continental GT and GTC SunVisor Clip. Original centre piece and cover fit this model as shown in the photos. This was designed from scratch and not scanned. Printed on Ankermake M5c with 40% honeycomb infill to ensure…
https://www.thingiverse.com/thing:2496831 is really handy for leveling, but I found it still a bit hard to turn so I made the knob wider with a pattern to make it easier to grip and turn. Post-Printing I used a #1 phillips head…
Coque pour téléphone portable Samsun S20 FE et S20 FE 5G. Cnoçu pour être imprimée en TPU. Avec cette coque, lorsque le téléphone, ni l'écran, ni les lentilles d'appareils photos ne sont en contacts avec la table.
Clips onto the monitor. Made specifically for the G95SC.
Samsung Galaxy S25Ultra cover TPU and optional camera rings. Updated model sligthtly more round bezels and added magnet ring for magcharger. Camera covers has a tiny pocket or sleeve witch held them in tpu case, They seem to hold pretty…
A shim that will allow you to clamp a Suntour HL-3000 “Head Binder” to the shaft of a 22.2mm quill stem. Originally, these were meant to interface with a special, thin steel locknut, all of which have seemingly been lost to time. In lieu…
I wanted a little mini version of my e450, so made this! With this case you should have more than enough room for a Pi, one or two hats, and a 40mm cooling fan! The grated design on the front and 40mm fan on the rear gives plenty of…
Taking @fabernex_542538 designs and @BargainBin_1518988 re-design, I modified the newest @fabernex_542538 model (v2) to fit the magnet placement of Samsung Galaxy Tab S9 FE model and 10x2 round magnets. Should work also for Tab S9, S10 FE…
Samsung Galaxy S25 3d model, the phone is incredibly detailed , perfect for designing phone cases, stands, accessories etc., STL, OBJ and BLEND files Check out my other models! Have a great day!
Sun Visor Cap for Ford Fusion based on DS73-F040A26 I installed it in my car, and seems firmly in there. I increased a chamfer from 0.2 to 0.35 before uploading to ease removal when desired. If the cap doesn't stay in as desired, let me…
These sun shields are thicker than the originals. I've made them that way so they'll hold their shape. I've designed a version with a 10x1 mm magnet slot—just be sure to align the poles correctly before gluing them in place. While they…
support permettant de ranger votre pompe vacuum3 sans abimé la membrane étanche. imprimé avec du pla+ recyclé , buse de 0.4 , couches de 0.2 , 10% de remplissage gyroide , 4 murs .
Here a quick TPU modèle for Samsung Galaxy A202F, easy printable with TPU. I took an extra time to design small plugs to prevent dust to go in the jack or usb C connectics.
Die Neuauflage von B3D-Autodarts-Automatic-Score System ist nun endlich verfügbar. Automatische Darterkennung? Mit Autodarts & Co. Kein Problem. Aber wie oder was erkennt die Darts? Dafür benötigen sie zbsp. Solch ein Set, um Kameras…
Eco Turbo Fan - FLSUN V400 I designed a kit to mount the BIQU eco turbo fan kit on the FLSUN V400. I started from the fun duct by Robert_Klotz (https://www.printables.com/model/725525-flsun-v400-cpap-duct) modifying it and improving some…
Here a Samsung Galaxy tab A (2016) holder for wall or 4080 aluminum extrusion Material: PLA Layer: 0.2mm Infill: 15% 3d Honeycomb Additional materials needed: 1X M8X65 Socket bolt between the wall mount and the arm 1X M6X25 Socket bolt…
Hail the sun band logo keychain intended for multicolor / swapping filament step by step Cura slicer filament swap instructions (for single filament printers like the ender 3 pro): select “Extensions” → “Post Processing” → “Modify G-Code”…
EXTRUDR Easter Bunny 2017 Separate Sunglasses + Lenses >>> Reupload of the Extrudr Easter Bunny 2017 Separate Sunglasses >>> Lenses for Sunglasses (my remix) I made suitable lenses for the Extrudr Easter Bunny 2017 with separate…
I was looking for a compact case for my clip-on sunglasses, but most cases were too big, mostly for the glasses themselves. So I decided to print a custom case. The case is just one clip and fits discreetly in my trouser pocket where I…
Holder for Samsung Odyssey G6 remote with support on sides
FLSun Super Racer - HGX Lite Housing / Mount (no inserts)
sleeve to enclose the DKS remote and a simple clip to clip it to a sunscreen or other convenient location. solidworks file included for future improvement. print with PC or ABS because the inside of a car gets real hot. pla gonna melt.
Zusatzkühlung Deye Hybridwechselrichter SUN-5/6/8/10/12/15/20/25K-SG01HP3-EU-AM2
This Sun Protection Case for CMF Phone 2 Pro shields your phone from the sun - helping to prevent overheating while you enjoy the outdoors - whether you're at the beach, the pool, or just hanging out with friends on a sunny day! This Sun…
🌈✨ Rainbow Suncatcher – Snap-Fit Stained Glass Style Window Decor A cheerful little ray of pastel joy to hang in your window, on your wall, or anywhere that could use a little extra ✨heckin’ happy✨. This stained glass-style rainbow is…
Since I started working on small scale solar power plants, I continued to search for ways to increase the energy yield of the two to four solar modules. The “Sunchronizer D1" Dual Axis Tracker is a solar module holder with which…
My Flsun Slicer profile solves some blobs, cooling and under-extrusion issues of the default Flsun Slicer profile for the T1 Pro. For Prusaslicer: I need a few more days to improve a little the profile and I will publish it here 🙂 For…
Can't find compatible blocks of carbon for your Sunlu Mini Air Purifier…..problem solved! Looking for a stand to hold your air purifier in an optimal orientation within your printer enclosure, see here on Printables. Simply print the 2…
I re-modeled the injection molded compliant button part of a Sunlu S1 Filament dryer. I re-printed a lot of functional and decorative parts for my printer in blue Filament, to add an interesting secondary accent color. This is one of…
Custom fan mount made for the S1 filament dryer, for attaching a 50mm fan. Connecting the fan requires modifying the electronics of the dry box (perform at your own risk only if you know what you're doing) I soldered a voltage regulator…
Samsung Portable SSD T7 Touch - Gehäuse. Doppelter Schutz bei voller Zugänglichkeit. PETG 0,2mm; Düse 0,4mm
Remixed the original clip as I didn't want to have to attach anything to the remote and as I still had the original Steel Line Garage remote holder I made modification to make the clip narrow and able to slide into the remote holder.
My Sun Microsystems Type 7 Keyboard was missing a foot, so I modelled a replacement which matches the original. The replacement model is as close as possible to the original as I could get and snaps into place just like a stock foot. The…
The original 2025 heliochronometer sundial reads time between 5:30AM & 6:30PM. This is due to the crescent main dial which limits the mechanical movement of the alidade. The original design is available here: Accurate Heliochronometer…
The model was printed using a 0.4mm nozzle and a layer height of 0.15mm. Colour changes were made at layer 5 - 0.8mm, layer 9 - 1.4mm, layer 13 - 2.0mm, and layer 17 - 2.6mm. Choice of colours is optional but the last two will probably be…
Fits perfectly onto the Samsung FIT Plus USB sticks. The outer shape fits the shape of the sticks housing. Enjoy & have fun! Material: PETG Layerheight: 0.2mm Infill: 15% I used 3 wall lines
This is a phone case for the Samsung Galaxy S10e. I wanted to fix a few issues others i found had. The fingerprint sensor works, but the buttons are a kinda firm. Not too bad though. I haven't tested the fit of the audio jack but the…
SUNJOE (Sun Joe) PH3600C Cordless Power Pruners holder wall mount for holding pruners and keeping charging cord handy. Mount with two number six screws 40mm apart. Print as pictured. No supports needed.
Stop throwing away your empty eSUN filament spools ! Give them a second life with this custom-engineered wall mount. This spindle is designed exclusively for the specific core dimensions of eSUN spools, transforming your "trash" into a…
My son and wife keep dropping the remote on the hardwood floor… So i remixed a model here on printables to make it a protective cover for our remote. I used a bit of double sided tape for the cover to make sure it doesn't come loose. I…
A sunburst or flower pattern fidget with either an open or closed petal design. Prints straight off but will need support on the build plate. The pictures would be better in yellow but I didn't have any :- (
https://www.vetrelciavolavky.cz/sochy/zena-na-slunci
This model is needed so that the cardboardspools in the AMS and similar systems work better. This prevents the spools from wearing out, and the plastic on the sides allows the AMS spools to move more easily, preventing the filament from…
This will replace the end caps, spacer, and create a mounting point that uses existing holes where kick panels go on a Datsun 620. I plan to mount on the right side (passenger side in the US and left-hand-drive countries), but I believe…
Current version is for suited for four sunglasses and can be mounted by using double-sided mounting tape. If the pins are to small, try adjusting them by a few percentagepoints to get that tight fit. Enjoy! Get creative and choose your…
A student in an autistic classroom that I sub in got angry and broke the knob off the Samsung dryer. Luckily for the teacher, I'm pretty good at designing things. It pops on and works just like the original. It would also work on the…
Bike trainer Samsung Galaxy A23 mount - Final
Remix of Keystone Panel Mount by M Hole diameter is 3.4mm and the screwhead (widest part of the scew) 6.25mm.
This modification works incredibly well to guide filament from a Sunlu Filament dryer. Tilted up like this, it stops the filament from tangling during a long print, or at the end of the spool. You will need; 4 - 4mm x 14mm machine bolts…
Protective cover for Samsung Q990F. Printed from PLA, no supports required. Only additional hardware required for assembly is a little bit of double-sided sticky tape around the beveled edge. I just used four (4) small strips 90 degrees…
its a charging dock for the Samsung watch charger and an apple magsafe charger
Annealing Tray for Sunlu E2 Filament Dryer This is a custom annealing tray designed for the Sunlu E2 filament dryer. The stock annealing tray takes up both filament roll slots, but with this version you can anneal parts while still drying…
I liked the original model but wanted it to hold more securely. See remix changelog for notes. Fusion 360 files included. Have fun. Licensing: Credit/attribution/link is my only requirement. Free to use, modify, or sell. Please share your…
Inspired by https://www.thingiverse.com/thing:7102110 but totally new designed with the overhang it doesn't pop out itself, but can be removed easily when printed with flex material I printed in Geeetech TPU, other brand maybe shrink a…
