Sunlu AMS lite adapter NEW VERSION SPOOL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for the new 62.5 mm diameter (2.46 inches) Sunlu spools to 55 mm (2.16 inches) spools to work with the AMS Lite.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 415
- Wydruki
- 8
- Wyświetlenia
- 1770
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Adapter for the new 62.5 mm diameter (2.46 inches) Sunlu spools to 55 mm (2.16 inches) spools to work with the AMS Lite. It has 2 tabs for better attachment to the spool. No print support needed with this model.
Print with 15% infill. It works in PLA, but it is recommended to print in PETG. When assembling, you will need to bend the piece inward. It will act as a spring to hold the spool. It needs to fit tightly to prevent it from falling off the AMS Lite. To remove it from the spool, push on the opposite side and it should come off immediately.