Sunlu AMS lite adapter NEW VERSION SPOOL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for the new 62.5 mm diameter (2.46 inches) Sunlu spools to 55 mm (2.16 inches) spools to work with the AMS Lite.
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 415
- Makes
- 8
- Views
- 1,770
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Adapter for the new 62.5 mm diameter (2.46 inches) Sunlu spools to 55 mm (2.16 inches) spools to work with the AMS Lite. It has 2 tabs for better attachment to the spool. No print support needed with this model.
Print with 15% infill. It works in PLA, but it is recommended to print in PETG. When assembling, you will need to bend the piece inward. It will act as a spring to hold the spool. It needs to fit tightly to prevent it from falling off the AMS Lite. To remove it from the spool, push on the opposite side and it should come off immediately.