1 / 2
Better Flowing Exhaust Fan Cover for the FLSUN S1 — zdjęcie 1
1 / 2

Better Flowing Exhaust Fan Cover for the FLSUN S1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a much better flowing fan cover than the original cover which is very restrictive.

Ocena
0 / 5
Polubienia
8
Pobrania
57
Wydruki
0
Wyświetlenia
166
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This exhaust fan cover aims to free up the airflow from the exhaust fan on the FLSun S1.  This might fit the Pro version as well since the chassis should be identical, but I don't have a way to verify for sure. 

If you are printing in PLA or PETG with the door shut it's nice to try and keep the chamber as cool as possible.  This flows much better than the stock fan cover and is a quick easy print.  

There is still some air flow restriction from the HEPA and carbon filter, it flows very well without the filter in place.   A fan upgrade might be necessary to a static pressure optimized fan at some point to move maximum air through the filter restriction.  

Tagi