Liczymy pasujące modele…
Handle for The T1/Pro The uploaded orientation is intended to have a clean, visible surface, but of course, it can also be printed differently without supports. Unfortunately, my printer didn’t come with a handle, so I quickly created my…
As my printer is located on desk with original enclosure I designed side spool holder. Central cylinder is for spools with 55mm central hole. I used aluminium stick 8mm for cylinder, but also there is file for spool sticks, please use…
this is the bracket I use with my flsun T1 pro to hold the spool end of a 21" long piece of ptfe tubing. the center hole needs to be threaded to match whatever QR fitting you choose. I used the SMC KQ2H04-M5A so I threaded it to 5x0.75.…
I wanted to run LED's to be able see prints easier so I made these for the strips to adhere to easier. They don't need to be super tough but they are thin so I printed them with 100% infill in PLA.
https://www.thingiverse.com/thing:2496831 is really handy for leveling, but I found it still a bit hard to turn so I made the knob wider with a pattern to make it easier to grip and turn. Post-Printing I used a #1 phillips head…
Eco Turbo Fan - FLSUN V400 I designed a kit to mount the BIQU eco turbo fan kit on the FLSUN V400. I started from the fun duct by Robert_Klotz (https://www.printables.com/model/725525-flsun-v400-cpap-duct) modifying it and improving some…
FLSun Super Racer - HGX Lite Housing / Mount (no inserts)
My Flsun Slicer profile solves some blobs, cooling and under-extrusion issues of the default Flsun Slicer profile for the T1 Pro. For Prusaslicer: I need a few more days to improve a little the profile and I will publish it here 🙂 For…
Camera link (aliexpress): https://it.aliexpress.com/item/1005007487050657.html?spm=a2g0o.order_list.order_list_main.353.56743696wTfaux&gatewayAdapt=glo2ita
IMPORTANTE Este perfil esta diseñado para la FLSun SR, debe considerar las siguientes mejoras en el sistema de la impresora Barrel (HeatBrak) Bi Metal TriangleLab Hotend Volcano Aluminio TriangleLab Base Magnética Fria Kdeavi/Numaker…
I found it hard to align my PEI build plate that I bought for my FLSUN SR. I created this model to help align the sheet perfectly every time without hassle. This model is made to attach to the existing glass build plate and mounts that…
About one time in three, when feeding filament from the dry box, it would jam in the filament sensors, the initial PTFE tube would flex, and it would pop out of the hole in the dry box and require three hands to get the tube back into the…
This model use a total of 6 m4x10mm screws with 6 m4 tnuts for a more sturdy and easy way to install-remove the covers
The original version was great when I had the stock hotend, but now I have a different one that needed more depth for the fan to be blowing in the correct spot for filament cooling. And, because I changed my entire hotend setup, save for…
This is a case for Anycubic camera , if you want to change it why not :)
Simple drawer organizer for the flsun sr with place for the level sensor, 11 nozzle, wrench and some little things. Print with 0.30 mm layer heigth for max speed, 5% infill is more than enougth
ottimizza al massimo il raffreddamento anche con la ventoila impostata MIN 35% e MAX 65% con la stampante FLsun S1 senza kit di silenziamento supera brillantemente anche i test con sbalzi impossibili
potenza di raffreddamento potentissima al 100% della ventola penso sia addirittura troppo piega persino il filamento mentre fa i ponti ..perciò va ridotta la potenza ,ridotto al minimo peso ( 9,61 gr. )e volume tolto tutto ciò che non…
Filament spools have labels. I like seeing those labels, so I moved the entire filament sensor to the other side of the printer. This actually makes the sensor much less accurate, since it moves when you print anything. I ended up getting…
Part A and B are simply mirrored for the left and right side. I've printed it with ABS. No Supports needed. Resolution: 0.22 Infill: 50%. Requires: 4x M3x22mm (Hexagon Socket Drive Screw) 4x M3 nuts 8x M4x10mm 8x M4 square nuts - If you…
No support needed. Insert the light inside during the printing (i did it at layer 338). I used these lights (60mm x 9mm): https://amzn.to/3TauYI8 I remixed a part of: https://www.thingiverse.com/thing:4864776
This is a mod for the FLSUN SR to mount the Phaetus Rapido HF Hotend on the Effector and use the parts of the original extruder to replace this thing with an Vz HextrudORT to create a good Direct Drive System for this machine. For this…
I was desperatly searching for a mobile mount for my speederpad but didn't find any so i decided to build one. The very nice and solid Tower mount clip credited to @YosiYaffe https://www.printables.com/@YosiYaffe was a huge time saver.…
Hi, i can finally say i got rid of my stringing they are base on the “Beast Effector” i remodel to work on any stock FLsun SR I Used 2 5015 Fans on a Bowden setup for the time being. but it can be used with any, i use my fans between 60…
Flsun Q5 Mini Sherpa Direct Drive (HGX lite extruder compatible) The extruder is angle mounted allowing full movement on the bed House is a single printable piece, supports are necessary, if you print it upside down less support material.…
Gedruckt in PLA+ schwarz, Layerhöhe 0,2mm. Kein Brim, keine Supports erforderlich. Zur Befestigung werden jeweils sieben Stück Messing-Gewindeeinsätze M4x8,1x6,3 sowie Tellerkopfschrauben M4x12 benötigt.
Direct drive for FLSUN SR with the removable Bambu A1 hotend and LGX lite or HGX V2 extruder. Subject to changes! Original 4010 fans can be used Adapters for two 5015 fans Updated adapter for CPAP 3010 Fan for hotend heatsink Insert the…
A pillar cover to use 50mm neopixel ring light. Parts needed: 2x 50mm neopixel ring lights 4x M2x6 self tapping screws wiring (I used some extra motor cables I had laying around) optional 2x JST-XH-4A connectors for the lights Klipper…
To be able to use my 3D printer as a plotter cutter also, I created a simple mount for a basic cheap Chinese plotter blade. These can be bought for a few bucks and come with lots of replacement blades with different edge angles. I bought…
Permet de mieux refroidir le filament sans necessité de les pousser à 100%, 70% suffit amplement. Vis (x4) et cylindres (x2) imprimés en 0,12mm d'epaisseur, avec jupes. Les platines en 0,20mm, sans support (mettre à plat sur le plateau,…
A remix that allows the left USB port to be used (if you moded the case to expose the left USB port). It's otherwise exactly the same as the original. Print with tree support, bed only. probably best to print with PETG. May interfer with…
Bed - Overhang - Bridging - Top layer Test for delta printers, but can be used for all kind of printers.
this model allows the complete modification of the effector of the printer in this way it is possible to mount in a single piece the two fans to increase the amount of air that reaches the piece in this way Not only is it possible to…
I needed a build plate stand for the V400, but I did not find one. In this case, I modelled a 2 in 1 solution. You could use it to V400 + 2pcs of any buildplate. (like Bambulab in the pictures.) The round V400 build plate is fits…
Spacer for FLSun SR Levelling Probe This spacer increases the distance between the sensor and the nozzle, ensuring proper leveling in case of hotend changes. I used it to install the high-flow nozzle from the Creality K1. The spacer is…
This is an extended print cooling duct for a Flsun QQ-S. I designed this duct to fit with a V6 Volcano hot end. I recommend printing in PETG or ABS. Place the flat side of the duct on the bed for easy printing. Supports aren't necessary.
There are already several re-mixes of this spool holder for the FLSUN QQ, but none support the 608 zz bearings I already have. The only difference from the original are 2 holes for m4 screws that are used to mount it to the top of the…
3DM4RK created a great tool and nozzle holder for the QQ. I just wanted it to fit onto the tower more securely. So I reworked the section that clips onto the tower. It's now a very tight fit. Print Settings Printer: FLSUN QQ Rafts: Yes…
Note: FLSUN seems to have changed up the sensor they use. A simple holder for the new leveling sensor add-on for the FLSUN QQ. It helps keep my printing space organized. If you have a QQ too, it might help you. Print Settings Printer:…
An effector housing I designed more than a year ago. Printed with simple PETG it shows no signs of deterioration. Goal was to achieve a light and compact effector for quality printing (reduce ringing for 150mm/s print speed) housing…
Simple bracket to keep the airhose and cable together, the small hole is for the filament. layer 0.2 material any. infill 15% min.
Wanted a mount for a webcam, thanks to Blackbird for the design idea. Left room for an indexer too. It fits but not tight, so I added a dab of glue.
A beefier version of idler holder for V400. See original model for more details
I made this for the NeedItMakeIt fan duct contest and it won! It's a lightweight high performance fan duct for the FLSUN T1. This was a first attempt at a fan duct (for a printer that I don't even own lol) so I'm pleased with the results.…
I'm really sick of gatekeepers, so I made this profile of the side of the printer in order to design my own doors/enclosures/accessories for it. No more paid files to later find out they don't work for you. I will be working on some of…
after I switch the board from the junk robin nano to mks sgen_l and fysetc mini 12864 panel v2.1 i add a case for it it will press fit and you can use 2 sided tape to attach it if it's not fitting for you print at 101% Print Settings…
Bonjour, voici un remix de FLSUN Q5 swappable / interchangeable cooling ducts https://www.thingiverse.com/thing:4577330 Les buses vennnaient trop proche du plateau, j'ai donc modifié 2 buses pour avoir 2mm de distance entre le plateau et…
I remixed the model so that you can use a stronger fastening principle with nuts in some places instead of the M3 heat inserts. and I sealed the heatsink airflow path so no air goes down to the model. I also changed the clamp to make the…
i added a bracket for a 5015 blower fan for the heat sink, because i got heat creaps from time to time. this solves the problem for me. For this housing: https://www.printables.com/model/271144-flsun-sr-sherpaorbiter-housing
better air ducts. Support included. Print in ABS or annealed PLA
Basically a remix of the aforementioned file, I liked it to be "in line" with my printer and my OCD was killing me. Enjoy
Проставки для установки экструдера для работы с глиной. В эффекторе нужно просверлить всего лишь 2 отверстия! Ссылка на комплект для работы с глиной:…
A 3D printable light, durable and efficient Wire Guide Clip for the FLSUN QQ Delta 3D printer, designed to secure the wires inside the towers. The part can be easily 3D printed, without any support, on a modern inexpensive 3D Printer.…
Handle for The T1/Pro The uploaded orientation is intended to have a clean, visible surface, but of course, it can also be printed differently without supports. Unfortunately, my printer didn’t come with a handle, so I quickly created my…
Fan duct for 75x75x30mm Blower fan. The file with clips is for a Flsun super race (SR) The other file does not have any clips and is smooth on all the sides ie you will need to find a way to attach it to your printer yourself. The…
Aesthetic remix of the “Flsun Q5 leveling sensor holder” of EA3D to be more discrete.
Got bored one night and decided to be semi productive and make a few magnets for different things. Magnets are printed INSIDE the object, using 20x10x2mm magnets. Can be found easily on amazon. https://a.co/d/7DLZeI9 ← any like this will…
I realised for my FLSUN Super Racer the enclosure from Prouting (@prouting_1632056). But I had issues with the hinges that were a bit hard to mount and I prefer to fix it with 2 screws. This hinges require two M3x20 screws and two M3 T…
If you have an idea for a glue or tool holder?? Write to me :) Universal Mount - print time 39min. (PETG, ASA, PCTG) Glue and tool holder - print time 1h 11m (PLA… and can be printet in almost any kind of filament) Glue stick size 23,6mm…
I had some extra 24V 5015 blower fans lying around that I used to upgrade my FLSUN Super Racer's part cooling, so I figured I'd upgrade the mainboard cooling too! This drop-in replacement directs the air flow over the stepper driver…
A Spool Holder for the FLSun “QQ” Delta 3D Printer designed to hold a standard spool of filament securely while still allowing for quick spool changes, along with a removable PTFE tube bracket used to hold securely a PTFE tube coming from…
The cage for the hot end for the effector by @RyanMaverick_259405 is about 3mm too short for me. This leaves a gap between cage and the effector plate as well as the duct fan and the effector plate. The gap between the effector plate and…
I looked for a better way of mounting the Speeder Pad on my FLSun V400. Thats what i use for now. Printed with PLA+, 50% infill and triangle pattern.
Flsun V400 arm widening pliers Makes it easy to unhinge the spring loaded ball joint to do maintenance. Printing / mouting Print with side down (see pictures). No supports necessary. Example pliers Printed using generic gray PLA. Approx…
I didn't like my spools bouncing around on the 5.5mm metal bar that comes with FLSUN T1 Pro, while effective it is far from elegant. I created a simple spool holder enhancement to eliminate the side-to-side movement and improve reel…
I find the images from the factory-supplied camera to be much too bright. I'm currently using a different camera, also with a low-light chip, but the problem remains. The LED cover is 200 mm long and can block up to 80% of the light.…
Introduction This model allows for the use of dual 5015 fans on the FLSUN v400. The dimensions were based on ChrisCampbell 's FLsun v400 Cooling Fans 5015 Adapter and Nyndroth 's remix . The front fan cover remains unchanged and also…
Création de galets sur axe, mise à jour d'une création existante, Modification taille de cône Ajustement longueur
Flsun T1 arm widening pliers Extends the spring to extract the ball joint rods. Two versions, short and long. The short will be more maneuverable, and the longer more stable and require less force. Printing Print oriented as shown in the…
FLSUN T1 Pro Filament Spool Holder using 608RS bearings. Modified version using two 608RS bearings and easier to print. Only bottom bearing place required normal support. Tested myself but let me know if any fitment issue.
Cover per lo schermo touch per flsun t1 e t1 pro. 2 LAYER, riempimento al 25 , no supporti .
The Flsun S1 i a very heavy printer, so hard to move! So I designed an adapter for some very sturdy wheels, used for moving furniture and with a declared load capacity of 200 kg for 4 wheels. I bought the wheels on AliExpress at this…
****These models have not been printed or tested yet, I have not had the time to install and test them**** You will need a dremel to enlarge the hole where the original hotend went, to make room for the new one. The purpose of this design…
EDIT 12/23/24: I have created 2 new versions, one with an integrated ADXL345 mount, and one with FLSUN branding on the side to give some life to the otherwise blank right side. Tolerances have also been adjusted. I've provided several…
Support qui s'accroche directement sur le bati de la machine, 100% fonctionnel Ne nécessite pas de support (no support) pour l'impréssion Impression : Couche 0.2 Remplissage 30% Vitesse max 400mm/s
Test Silencer for the FLSun S1. Need 3x 5mm Cube magnets and glue. Model is builded to take it apart and remove dust from used filters You can add some cotton inside or foam filters. inspired by the automotive industry. See air hoses…
As my printer is located on desk with original enclosure I designed side spool holder. Central cylinder is for spools with 55mm central hole. I used aluminium stick 8mm for cylinder, but also there is file for spool sticks, please use…
This is a shelf that utilizes the existing holes in the side of the enclosure that supports the common cereal container filament dry box setup.
this is a mount for your adxl345 on a sr with extended meltzone
the original S1 was very noisy so Flsun decided to change that. they also offer a Upgrade Kit for early machines. In that upgrade kit a new Blower will be installed but due to its bigger dimensions they decided to do that in a seperate…
Support Cable/Tuyau Flsun T1 Pro Airhose and cable bracket Flsun T1 Pro S'adapte Parfaitement sans forcé.
Why me make: My printer is on a high table with the spool holder nearly touching the ceiling. This makes it quite difficult to change. Therefore, I designed this, a basic guide for the PTFE tube to be curved around without any sharp…
this is the bracket I use with my flsun T1 pro to hold the spool end of a 21" long piece of ptfe tubing. the center hole needs to be threaded to match whatever QR fitting you choose. I used the SMC KQ2H04-M5A so I threaded it to 5x0.75.…
I wanted to run LED's to be able see prints easier so I made these for the strips to adhere to easier. They don't need to be super tough but they are thin so I printed them with 100% infill in PLA.
Everything you need to install the Silent Kit CPAP fan inside the S1 while drawing in outside air (not chamber air). Needed : 5 x M3x16mm Screws 5 x M3x5mmx4mm Threaded Inserts 6 x 5mm diameter x 3mm height Magnets 3 x M3 Flat Washers…
The Flsun T1-pro is a great machine but the spool holder is just a wire rod. I found that carboard spools do not rotate freely. I designed this to mount where then original is but to include bearing rollers. Can print in PLA, ASA, PETG,…
Check out this fanduct! Made this after an unfortunate series of events caused my original 4010 fans to melt while removing a blob of plastic from them. After replacing the 4010 fans with cheap ones from Amazon and those fans burnt out i…
In my workshop there is not so much space that I can afford to have a tangle of cables and a movable display on my desk, I also often use large rolls of filament which are impossible to mount on top of the printer. To solve these problems…
Recommended setting: 4 walls, 15% infill, material doesn't matter what you like. Shown in the photo with a break for the second color.
An air duct for the Flsun T1 series. Print it with at least PETG not PLA as it is very close to the heater block. Thanks @NeedItMakeIt for the basic template.
Added a loop to the top of the carriage to zip tie my wires too for strain relief! Print same as original! Category: 3D Printer Parts
Left side carriage plate. Includes mount for Z limit switch if you are using the 3 wheel x carriage. Print Settings Printer: FLSun I3 Rafts: No **Supports:** No Resolution: .2 **Infill:** 50 Notes: Print with 4 walls and 4 top/bottom.…
