FLSUN T1 Pro Spool Holder Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FLSUN T1 Pro 75mm wide Spool Holder designed for 6mm ID x 13mm OD x 5mm Deep Flange Bearings
- Ocena
- 4 / 5
- Polubienia
- 44
- Pobrania
- 264
- Wydruki
- 2
- Wyświetlenia
- 1750
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't like my spools bouncing around on the 5.5mm metal bar that comes with FLSUN T1 Pro, while effective it is far from elegant. I created a simple spool holder enhancement to eliminate the side-to-side movement and improve reel function.
I went with F686ZZ bearings as they are widely available and used in many 3D printers anyway. https://a.co/d/5WPd5DL.
(Bearings in photo are for illustrative purposes only, they are the wrong size at 5mm x 13mm x 4mm. Will update photo with correct bearing installed once they arrive.)
Spool holder enhancement also works well without the bearings.
I will be making an auto-rewind version in the near future to prevent tangling.