1 / 2
FLSUN SR Sherpa/Orbiter Housing Remix With Nuts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed the model so that you can use a stronger fastening principle. and I sealed the heatsink airflow path.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
I remixed the model so that you can use a stronger fastening principle with nuts in some places instead of the M3 heat inserts. and I sealed the heatsink airflow path so no air goes down to the model. I also changed the clamp to make the hotend fit tighter.
Works with standard V6 hotend.
Print in ABS