FLSUN QQ Tower Wire Guide Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A 3D printable light, durable and efficient Wire Guide Clip for the FLSUN QQ Delta 3D printer, designed to secure the wires inside the towers.
The part can be easily 3D printed, without any support, on a modern inexpensive 3D Printer. They can be printed with a variety of heat tolerant materials, including PETG, ABS, ASA and many other types of heat tolerant printable materials.
PETG works very well for this application. It is easy to print. The object should be durable, easy to maintain, and last for a long time.
PLA should be avoided because the part may be suject to temperature exceeding ~55 C (~ 130 F) during normal use, especially when printing filament such as PETG, ABS, ASA or other that require a hot bed surface.
Printing Details
Recommended print settings with a .4 mm nozzle
- Layer Hight: .2 mm
- 2 perimeters or shells
- 5 bottom layers
- 5 top layers
- Infill ~20%
Assembly Instructions
1- Print a minimum of 6 clips
2 – Clip to the inside of the tower cover at the desired hight
Note: I found that 3 separate rows of clips work best for me. Therefore 9 clips total.
Please feel free to visit my store on My Mini Factory to view the other objects that I designed: https://www.myminifactory.com/users/DanoSoft